LinuxQuestions.org
Visit Jeremy's Blog.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware
User Name
Password
Slackware This Forum is for the discussion of Slackware Linux.

Notices


Reply
  Search this Thread
Old 03-02-2006, 08:48 AM   #1
dangold
LQ Newbie
 
Registered: Mar 2006
Posts: 17

Rep: Reputation: 0
PPTP Route Problem ??


Hello i'm really a newbie so pleace be patince (and not english native :\) and clear as you can thanks.

Ive got slackware10.2
Nic card, cable modem with PAP auth

now i'm connecting to the net getting ip from the isp and the isp says i'm logged on.
now when i'm pinging or anything else nothing is working

here are some output

# cable-start
Using interface ppp0
Connect: ppp0 <--> /dev/pts/0
PAP authentication succeeded
not replacing existing default route via 172.22.224.1
local IP address 87.68.159.13
remote IP address 212.199.20.237

ifconfig
eth0 Link encap:Ethernet HWaddr 00:00:E8:2C:3A:86
inet addr:172.22.229.55 Bcast:255.255.255.255 Mask:255.255.224.0
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1933 errors:0 dropped:0 overruns:0 frame:0
TX packets:37 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
RX bytes:712121 (695.4 Kb) TX bytes:3877 (3.7 Kb)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

ppp0 Link encap:Point-to-Point Protocol
inet addr:87.68.159.13 P-t-P:212.199.20.237
Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1460 Metric:1
RX packets:6 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
RX bytes:250 (250.0 b) TX bytes:46 (46.0 b)

route -n
root@buh:~# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
212.199.20.237 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
172.22.224.0 0.0.0.0 255.255.224.0 U 0 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 172.22.224.1 0.0.0.0 UG 0 0 0 eth0
 
Old 03-06-2006, 11:50 AM   #2
krassyo
LQ Newbie
 
Registered: Sep 2003
Posts: 20
Blog Entries: 1

Rep: Reputation: 0
route add default gw 87.68.159.13 dev ppp0

also check your /etc/resolv.conf for correct nameservers
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
problem of PPTP VPN connection. kocu Linux - Networking 9 09-24-2005 02:08 PM
I am not able to add a new route to my route table using route command prashanth s j Linux - Networking 2 09-03-2005 04:34 AM
pptp start problem..! skate Linux - Newbie 0 06-08-2004 05:38 AM
Debian pptp problem KingNothing Linux - Networking 0 05-07-2004 12:49 PM
PPTP problem, can't go to internet Freeman-Jo Linux - Networking 0 04-26-2004 03:03 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware

All times are GMT -5. The time now is 06:39 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration