LinuxQuestions.org
Review your favorite Linux distribution.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware
User Name
Password
Slackware This Forum is for the discussion of Slackware Linux.

Notices


Reply
  Search this Thread
Old 05-14-2019, 10:04 AM   #1
maschelsea
Member
 
Registered: Dec 2016
Distribution: Slackware 64bit 14.2
Posts: 310

Rep: Reputation: Disabled
PHP broken; how to repair?


I've been using Slackware for a little over a year now. I would like to learn more about it, but am unsure where exactly to start. I'd like to improve my script-fu, but so far have been unable to motivate myself to actually go out and search. So far, it has 'just worked' which is how I've managed to get this far without really learning much. I will say that I find forums like this one VERY helpful because it saves my data, so if I have a problem like this one, and I remember something someone said, I can easily go back and read what they said again. But for my current problem:

PHPMyAdmin is inaccessible. I don't know why. I've checked /var/log/httpd/error.log and found the following two lines for today:
Code:
[Tue May 14 09:30:57.837363 2019] [mpm_event:notice] [pid 1367:tid 140465856018304] AH00489: Apache/2.4.39 (Unix) configured -- resuming normal operations
[Tue May 14 09:30:57.948982 2019] [core:notice] [pid 1367:tid 140465856018304] AH00094: Command line: '/usr/sbin/httpd'
What is happening is that my PHPMyAdmin interface is permanently (or at least as close to "permanently" as seamonkey can get at this time) open in a tab. However, the page loads, and I see PHP code in it. I know from my experience that I should never see PHP code in a webpage. I am getting this from address
Code:
http://127.0.0.1/phpmyadmin/index.php
/var/log/httpd/access.log says:
Code:
127.0.0.1 - - [14/May/2019:09:36:59 -0500] "GET /phpmyadmin/index.php HTTP/1.1" 304 -
127.0.0.1 - - [14/May/2019:09:37:02 -0500] "GET /phpmyadmin/index.php HTTP/1.1" 304 -
127.0.0.1 - - [14/May/2019:09:37:53 -0500] "GET /index.php HTTP/1.1" 200 304
Thank you in advance to anyone who can offer advice on resolving this issue.
 
Old 05-14-2019, 10:16 AM   #2
ponce
Senior Member
 
Registered: Aug 2004
Location: Pisa, Italy
Distribution: Slackware
Posts: 4,757

Rep: Reputation: Disabled
near the bottom of /etc/httpd/httpd.conf just uncomment one line
Code:
# Uncomment the following line to enable PHP:
#
Include /etc/httpd/mod_php.conf
you might want to edit another line in the same file, just to avoid specifying index.php
Code:
#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.html index.php
</IfModule>
if you want to have a look at php errors maybe the most handy way is to edit a line in the /etc/php.ini file
Code:
;error_log = php_errors.log
like
Code:
error_log = /var/log/httpd/php_errors.log
then, restart httpd
Code:
/etc/rc.d/rc.httpd restart
you can also call the php interpreter via the command line and check for errors there
Code:
$ php -v
PHP 5.6.40 (cli) (built: Feb  7 2019 14:31:35) 
Copyright (c) 1997-2016 The PHP Group
Zend Engine v2.6.0, Copyright (c) 1998-2016 Zend Technologies
    with Zend OPcache v7.0.6-dev, Copyright (c) 1999-2016, by Zend Technologies

Last edited by ponce; 05-14-2019 at 10:23 AM.
 
1 members found this post helpful.
Old 05-14-2019, 10:46 AM   #3
maschelsea
Member
 
Registered: Dec 2016
Distribution: Slackware 64bit 14.2
Posts: 310

Original Poster
Rep: Reputation: Disabled
Quote:
Originally Posted by ponce View Post
near the bottom of /etc/httpd/httpd.conf just uncomment one line
Code:
# Uncomment the following line to enable PHP:
#
Include /etc/httpd/mod_php.conf
you might want to edit another line in the same file, just to avoid specifying index.php
Code:
#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.html index.php
</IfModule>
if you want to have a look at php errors maybe the most handy way is to edit a line in the /etc/php.ini file
Code:
;error_log = php_errors.log
like
Code:
error_log = /var/log/httpd/php_errors.log
then, restart httpd
Code:
/etc/rc.d/rc.httpd restart
you can also call the php interpreter via the command line and check for errors there
Code:
$ php -v
PHP 5.6.40 (cli) (built: Feb  7 2019 14:31:35) 
Copyright (c) 1997-2016 The PHP Group
Zend Engine v2.6.0, Copyright (c) 1998-2016 Zend Technologies
    with Zend OPcache v7.0.6-dev, Copyright (c) 1999-2016, by Zend Technologies
Thank you for the above advice. Now, after carefully following your instructions, my problem has changed. Now, instead of seeing PHP code, the page completely fails to load. I see in my PHPMyAdmin tab a page that says "Page Load Error" in the title and the text of the page says "Connection Interrupted", "The document contains no data.", and "The network link was interrupted while negotiating a connection. Please try again." When I try again, the same thing happens. There was some information returned when I restarted httpd, but I don't think it's relevant to my current issue:
Code:
root@caitlyn:~# /etc/rc.d/rc.httpd restart
AH00558: httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1. Set the 'ServerName' directive globally to suppress this message
Please advise.
 
Old 05-14-2019, 10:54 AM   #4
ponce
Senior Member
 
Registered: Aug 2004
Location: Pisa, Italy
Distribution: Slackware
Posts: 4,757

Rep: Reputation: Disabled
you can try calling the interpreter via the command line, as suggested above, or read /var/log/httpd/error.log and /var/log/httpd/php_errors.log (hope you have enabled it, still like suggested above).
 
Old 05-14-2019, 11:14 AM   #5
maschelsea
Member
 
Registered: Dec 2016
Distribution: Slackware 64bit 14.2
Posts: 310

Original Poster
Rep: Reputation: Disabled
Quote:
Originally Posted by ponce View Post
you can try calling the interpreter via the command line, as suggested above, or read /var/log/httpd/error.log and /var/log/httpd/php_errors.log (hope you have enabled it, still like suggested above).
From /var/log/httpd/error_log:

Code:
[Tue May 14 11:06:07.948731 2019] [core:notice] [pid 1367:tid 140465856018304] AH00052: child pid 5225 exit signal Segmentation fault (11)
[Tue May 14 11:06:07.948767 2019] [core:notice] [pid 1367:tid 140465856018304] AH00052: child pid 5226 exit signal Segmentation fault (11)
[Tue May 14 11:06:08.949036 2019] [core:notice] [pid 1367:tid 140465856018304] AH00052: child pid 5281 exit signal Segmentation fault (11)
[Tue May 14 11:06:08.949061 2019] [core:notice] [pid 1367:tid 140465856018304] AH00052: child pid 5282 exit signal Segmentation fault (11)
[Tue May 14 11:06:08.949067 2019] [core:notice] [pid 1367:tid 140465856018304] AH00052: child pid 5283 exit signal Segmentation fault (11)
And from /var/log/httpd/php_errors.log:
Code:
root@caitlyn:~# cat /var/log/httpd/php_errors.log 
[14-May-2019 16:03:15 UTC] PHP Warning:  require_once(./libraries/vendor_config.php): failed to open stream: No such file or directory in /var/www/htdocs/phpmyadmin/libraries/common.inc.php on line 74
[14-May-2019 16:03:15 UTC] PHP Fatal error:  require_once(): Failed opening required './libraries/vendor_config.php' (include_path='.:/usr/lib64/php') in /var/www/htdocs/phpmyadmin/libraries/common.inc.php on line 74
When I try to run a custom php script that does not rely on a complex file system/structure, I get this:

Code:
root@caitlyn:~# php /var/www/htdocs/index.php
Host information:  Localhost via UNIX socket
Here is the code:
Code:
root@caitlyn:~# cat /var/www/htdocs/index.php
<?php 

	$user = "paparazzi@localhost";
	$passwd = "######";

	$mysqli = new mysqli("localhost", $user, $passwd, "paparazzi");
	if (mysqli_connect_errno()) {
		printf("Connect failed:  %s\n", mysqli_connect_error()); }
	else {
		printf("Host information:  %s\n", mysqli_get_host_info($mysqli)); }



?>
However, when I open that page in seamonkey, it returns a blank page. The code appears in the page source view, but the page itself does not execute.
 
Old 05-14-2019, 11:38 AM   #6
ponce
Senior Member
 
Registered: Aug 2004
Location: Pisa, Italy
Distribution: Slackware
Posts: 4,757

Rep: Reputation: Disabled
Quote:
Originally Posted by maschelsea View Post
from /var/log/httpd/php_errors.log:
Code:
root@caitlyn:~# cat /var/log/httpd/php_errors.log 
[14-May-2019 16:03:15 UTC] PHP Warning:  require_once(./libraries/vendor_config.php): failed to open stream: No such file or directory in /var/www/htdocs/phpmyadmin/libraries/common.inc.php on line 74
[14-May-2019 16:03:15 UTC] PHP Fatal error:  require_once(): Failed opening required './libraries/vendor_config.php' (include_path='.:/usr/lib64/php') in /var/www/htdocs/phpmyadmin/libraries/common.inc.php on line 74
that seems to say that your phpmyadmin installation is incomplete.

Quote:
When I try to run a custom php script that does not rely on a complex file system/structure, I get this:

Code:
root@caitlyn:~# php /var/www/htdocs/index.php
Host information:  Localhost via UNIX socket
Here is the code:
Code:
root@caitlyn:~# cat /var/www/htdocs/index.php
<?php 

	$user = "paparazzi@localhost";
	$passwd = "######";

	$mysqli = new mysqli("localhost", $user, $passwd, "paparazzi");
	if (mysqli_connect_errno()) {
		printf("Connect failed:  %s\n", mysqli_connect_error()); }
	else {
		printf("Host information:  %s\n", mysqli_get_host_info($mysqli)); }



?>
However, when I open that page in seamonkey, it returns a blank page. The code appears in the page source view, but the page itself does not execute.
it shouldn't appear in the page source view at all when the php code is interpreted, just the output/html, if there is some.
what are you opening in seamonkey? the file /var/www/htdocs/index.php (that is just a text file in your filesystem) or the php code executed by mod_php running through apache ( http://localhost/index.php ) ?

try creating a /var/www/htdocs/info.php file with this content
Code:
<?php
phpinfo();
?>
then run it via the command line ( "php /var/www/htdocs/info.php" ) and via the browser ( http://localhost/info.php ) and check the output (if it works in both cases and if it's the same).

...but looking at the output from your script via the command line at least there your php seems to be working just fine.

Last edited by ponce; 05-14-2019 at 11:57 AM.
 
Old 05-14-2019, 05:29 PM   #7
maschelsea
Member
 
Registered: Dec 2016
Distribution: Slackware 64bit 14.2
Posts: 310

Original Poster
Rep: Reputation: Disabled
Quote:
Originally Posted by ponce View Post
that seems to say that your phpmyadmin installation is incomplete.


it shouldn't appear in the page source view at all when the php code is interpreted, just the output/html, if there is some.
what are you opening in seamonkey? the file /var/www/htdocs/index.php (that is just a text file in your filesystem) or the php code executed by mod_php running through apache ( http://localhost/index.php ) ?

try creating a /var/www/htdocs/info.php file with this content
Code:
<?php
phpinfo();
?>
then run it via the command line ( "php /var/www/htdocs/info.php" ) and via the browser ( http://localhost/info.php ) and check the output (if it works in both cases and if it's the same).

...but looking at the output from your script via the command line at least there your php seems to be working just fine.
Code:
 root@caitlyn:/var/www/htdocs# php info.php &> /home/michael/php.txt
Code:
phpinfo()
PHP Version => 5.6.40

System => Linux caitlyn 4.4.172 #2 SMP Wed Jan 30 17:11:07 CST 2019 x86_64
Build Date => Feb  7 2019 14:30:29
Configure Command =>  './configure'  '--prefix=/usr' '--libdir=/usr/lib64' '--with-libdir=lib64' '--localstatedir=/var' '--sysconfdir=/etc' '--datarootdir=/usr/share' '--datadir=/usr/share' '--infodir=/usr/info' '--mandir=/usr/man' '--with-apxs2=/usr/bin/apxs' '--enable-fpm' '--with-fpm-user=apache' '--with-fpm-group=apache' '--enable-maintainer-zts' '--enable-pcntl' '--enable-mbregex' '--enable-tokenizer=shared' '--with-config-file-scan-dir=/etc/php.d' '--with-config-file-path=/etc' '--enable-mod_charset' '--with-layout=PHP' '--disable-sigchild' '--enable-xml' '--with-libxml-dir=/usr' '--enable-simplexml' '--enable-xmlreader=shared' '--enable-dom=shared' '--enable-filter' '--disable-debug' '--with-openssl=shared' '--with-pcre-regex=/usr' '--with-zlib=shared,/usr' '--enable-bcmath=shared' '--with-bz2=shared,/usr' '--enable-calendar=shared' '--enable-ctype=shared' '--with-curl=shared' '--with-mcrypt=/usr' '--enable-dba=shared' '--with-gdbm=/usr' '--with-db4=/usr' '--enable-exif=shared' '--enable-ftp=shared' '--with-gd=shared' '--with-jpeg-dir=/usr' '--with-png-dir=/usr' '--with-vpx-dir=/usr' '--with-zlib-dir=/usr' '--with-xpm-dir=/usr' '--with-freetype-dir=/usr' '--with-t1lib=/usr' '--enable-gd-native-ttf' '--with-gettext=shared,/usr' '--with-gmp=shared,/usr' '--with-iconv=shared' '--with-imap-ssl=/usr' '--with-imap=/usr/local/lib64/c-client' '--with-ldap=shared' '--enable-mbstring=shared' '--enable-hash' '--with-mysql=shared,mysqlnd' '--with-mysqli=shared,mysqlnd' '--with-mysql-sock=/var/run/mysql/mysql.sock' '--with-iodbc=shared,/usr' '--enable-pdo=shared' '--with-pdo-mysql=shared,mysqlnd' '--with-pdo-sqlite=shared,/usr' '--with-pdo-odbc=shared,iODBC,/usr' '--with-pspell=shared,/usr' '--with-enchant=shared,/usr' '--enable-shmop=shared' '--with-snmp=shared,/usr' '--enable-soap=shared' '--enable-sockets' '--with-sqlite3=shared' '--with-regex=php' '--enable-sysvmsg' '--enable-sysvsem' '--enable-sysvshm' '--enable-wddx=shared' '--with-xsl=shared,/usr' '--enable-zip=shared' '--with-tsrm-pthreads' '--enable-intl=shared' '--enable-opcache' '--enable-shared=yes' '--enable-static=no' '--with-gnu-ld' '--with-pic' '--enable-phpdbg' '--build=x86_64-slackware-linux' 'build_alias=x86_64-slackware-linux' 'CFLAGS=-O2 '-fPIC''
Server API => Command Line Interface
Virtual Directory Support => enabled
Configuration File (php.ini) Path => /etc
Loaded Configuration File => /etc/php.ini
Scan this dir for additional .ini files => /etc/php.d
Additional .ini files parsed => (none)
PHP API => 20131106
PHP Extension => 20131226
Zend Extension => 220131226
Zend Extension Build => API220131226,TS
PHP Extension Build => API20131226,TS
Debug Build => no
Thread Safety => enabled
Zend Signal Handling => disabled
Zend Memory Manager => enabled
Zend Multibyte Support => provided by mbstring
IPv6 Support => enabled
DTrace Support => disabled
PHP executes fine from the command line. But it's the web interface I need working. The info.php script returns Page Load Error when I try to load it in seamonkey. The phpinfo command was too long for this post. I'll have to send it through multiple posts...
 
Old 05-14-2019, 05:32 PM   #8
maschelsea
Member
 
Registered: Dec 2016
Distribution: Slackware 64bit 14.2
Posts: 310

Original Poster
Rep: Reputation: Disabled
This post includes sections a through c...
Code:
Registered PHP Streams => compress.bzip2, php, file, glob, data, http, ftp, https, ftps, compress.zlib, zip, phar
Registered Stream Socket Transports => tcp, udp, unix, udg, ssl, sslv3, tls, tlsv1.0, tlsv1.1, tlsv1.2
Registered Stream Filters => mcrypt.*, mdecrypt.*, bzip2.*, string.rot13, string.toupper, string.tolower, string.strip_tags, convert.*, consumed, dechunk, convert.iconv.*, zlib.*

This program makes use of the Zend Scripting Language Engine:
Zend Engine v2.6.0, Copyright (c) 1998-2016 Zend Technologies
    with Zend OPcache v7.0.6-dev, Copyright (c) 1999-2016, by Zend Technologies


 _______________________________________________________________________


Configuration

bcmath

BCMath support => enabled

Directive => Local Value => Master Value
bcmath.scale => 0 => 0

bz2

BZip2 Support => Enabled
Stream Wrapper support => compress.bzip2://
Stream Filter support => bzip2.decompress, bzip2.compress
BZip2 Version => 1.0.6, 6-Sept-2010

calendar

Calendar support => enabled

Core

PHP Version => 5.6.40

Directive => Local Value => Master Value
allow_url_fopen => On => On
allow_url_include => Off => Off
always_populate_raw_post_data => 0 => 0
arg_separator.input => & => &
arg_separator.output => & => &
asp_tags => Off => Off
auto_append_file => no value => no value
auto_globals_jit => On => On
auto_prepend_file => no value => no value
browscap => no value => no value
default_charset => UTF-8 => UTF-8
default_mimetype => text/html => text/html
disable_classes => no value => no value
disable_functions => no value => no value
display_errors => Off => Off
display_startup_errors => Off => Off
doc_root => no value => no value
docref_ext => no value => no value
docref_root => no value => no value
enable_dl => Off => Off
enable_post_data_reading => On => On
error_append_string => no value => no value
error_log => /var/log/httpd/php_errors.log => /var/log/httpd/php_errors.log
error_prepend_string => no value => no value
error_reporting => 22527 => 22527
exit_on_timeout => Off => Off
expose_php => On => On
extension_dir => /usr/lib64/php/extensions => /usr/lib64/php/extensions
file_uploads => On => On
highlight.comment => <font style="color: #FF8000">#FF8000</font> => <font style="color: #FF8000">#FF8000</font>
highlight.default => <font style="color: #0000BB">#0000BB</font> => <font style="color: #0000BB">#0000BB</font>
highlight.html => <font style="color: #000000">#000000</font> => <font style="color: #000000">#000000</font>
highlight.keyword => <font style="color: #007700">#007700</font> => <font style="color: #007700">#007700</font>
highlight.string => <font style="color: #DD0000">#DD0000</font> => <font style="color: #DD0000">#DD0000</font>
html_errors => Off => Off
ignore_repeated_errors => Off => Off
ignore_repeated_source => Off => Off
ignore_user_abort => Off => Off
implicit_flush => On => On
include_path => .:/usr/lib64/php => .:/usr/lib64/php
input_encoding => no value => no value
internal_encoding => no value => no value
log_errors => On => On
log_errors_max_len => 1024 => 1024
mail.add_x_header => On => On
mail.force_extra_parameters => no value => no value
mail.log => no value => no value
max_execution_time => 0 => 0
max_file_uploads => 20 => 20
max_input_nesting_level => 64 => 64
max_input_time => -1 => -1
max_input_vars => 1000 => 1000
memory_limit => 128M => 128M
open_basedir => no value => no value
output_buffering => 0 => 0
output_encoding => no value => no value
output_handler => no value => no value
post_max_size => 8M => 8M
precision => 14 => 14
realpath_cache_size => 16K => 16K
realpath_cache_ttl => 120 => 120
register_argc_argv => On => On
report_memleaks => On => On
report_zend_debug => Off => Off
request_order => GP => GP
sendmail_from => no value => no value
sendmail_path => /usr/sbin/sendmail -t -i  => /usr/sbin/sendmail -t -i 
serialize_precision => 17 => 17
short_open_tag => Off => Off
SMTP => localhost => localhost
smtp_port => 25 => 25
sql.safe_mode => Off => Off
sys_temp_dir => no value => no value
track_errors => Off => Off
unserialize_callback_func => no value => no value
upload_max_filesize => 2M => 2M
upload_tmp_dir => no value => no value
user_dir => no value => no value
user_ini.cache_ttl => 300 => 300
user_ini.filename => .user.ini => .user.ini
variables_order => GPCS => GPCS
xmlrpc_error_number => 0 => 0
xmlrpc_errors => Off => Off
zend.detect_unicode => On => On
zend.enable_gc => On => On
zend.multibyte => Off => Off
zend.script_encoding => no value => no value

ctype

ctype functions => enabled

curl

cURL support => enabled
cURL Information => 7.64.1
Age => 4
Features
AsynchDNS => Yes
CharConv => No
Debug => No
GSS-Negotiate => No
IDN => No
IPv6 => Yes
krb4 => No
Largefile => Yes
libz => Yes
NTLM => Yes
NTLMWB => Yes
SPNEGO => No
SSL => Yes
SSPI => No
TLS-SRP => Yes
Protocols => dict, file, ftp, ftps, gopher, http, https, imap, imaps, ldap, ldaps, pop3, pop3s, rtsp, scp, sftp, smb, smbs, smtp, smtps, telnet, tftp
Host => x86_64-pc-linux-gnu
SSL Version => OpenSSL/1.0.2r
ZLib Version => 1.2.11
libSSH Version => libssh2/1.8.2

Last edited by maschelsea; 05-14-2019 at 05:33 PM.
 
Old 05-14-2019, 05:32 PM   #9
maschelsea
Member
 
Registered: Dec 2016
Distribution: Slackware 64bit 14.2
Posts: 310

Original Poster
Rep: Reputation: Disabled
This post contains the rest of the output of the phpinfo() command.
Code:
date

date/time support => enabled
"Olson" Timezone Database Version => 2016.10
Timezone Database => internal
Default timezone => UTC

Directive => Local Value => Master Value
date.default_latitude => 31.7667 => 31.7667
date.default_longitude => 35.2333 => 35.2333
date.sunrise_zenith => 90.583333 => 90.583333
date.sunset_zenith => 90.583333 => 90.583333
date.timezone => no value => no value

dba

DBA support => enabled
Supported handlers => gdbm cdb cdb_make db4 inifile flatfile 

Directive => Local Value => Master Value
dba.default_handler => flatfile => flatfile

dom

DOM/XML => enabled
DOM/XML API Version => 20031129
libxml Version => 2.9.5
HTML Support => enabled
XPath Support => enabled
XPointer Support => enabled
Schema Support => enabled
RelaxNG Support => enabled

enchant

enchant support => enabled
Version => 1.1.0
Libenchant Version => 1.5.x
Revision => $Id: 2b1a7a0910b094a8f56f81d474ff1837c4389a28 $

myspell => Myspell Provider => /usr/lib64/enchant/libenchant_myspell.so
aspell => Aspell Provider => /usr/lib64/enchant/libenchant_aspell.so
ispell => Ispell Provider => /usr/lib64/enchant/libenchant_ispell.so

ereg

Regex Library => Bundled library enabled

exif

EXIF Support => enabled
EXIF Version => 1.4 $Id: cad29b729548e4206f0697710cc9e177f26fdff3 $
Supported EXIF Version => 0220
Supported filetypes => JPEG,TIFF

Directive => Local Value => Master Value
exif.decode_jis_intel => JIS => JIS
exif.decode_jis_motorola => JIS => JIS
exif.decode_unicode_intel => UCS-2LE => UCS-2LE
exif.decode_unicode_motorola => UCS-2BE => UCS-2BE
exif.encode_jis => no value => no value
exif.encode_unicode => ISO-8859-15 => ISO-8859-15

fileinfo

fileinfo support => enabled
version => 1.0.5
libmagic => 517

filter

Input Validation and Filtering => enabled
Revision => $Id: 5b79667bd9a68977a9b4f7505223a8e216e04908 $

Directive => Local Value => Master Value
filter.default => unsafe_raw => unsafe_raw
filter.default_flags => no value => no value

ftp

FTP support => enabled

gd

GD Support => enabled
GD Version => bundled (2.1.0 compatible)
FreeType Support => enabled
FreeType Linkage => with freetype
FreeType Version => 2.6.3
T1Lib Support => enabled
GIF Read Support => enabled
GIF Create Support => enabled
JPEG Support => enabled
libJPEG Version => 6b
PNG Support => enabled
libPNG Version => 1.6.27
WBMP Support => enabled
XPM Support => enabled
libXpm Version => 30411
XBM Support => enabled
WebP Support => enabled

Directive => Local Value => Master Value
gd.jpeg_ignore_warning => 0 => 0

gettext

GetText Support => enabled

gmp

gmp support => enabled
GMP version => 6.1.1

hash

hash support => enabled
Hashing Engines => md2 md4 md5 sha1 sha224 sha256 sha384 sha512 ripemd128 ripemd160 ripemd256 ripemd320 whirlpool tiger128,3 tiger160,3 tiger192,3 tiger128,4 tiger160,4 tiger192,4 snefru snefru256 gost gost-crypto adler32 crc32 crc32b fnv132 fnv1a32 fnv164 fnv1a64 joaat haval128,3 haval160,3 haval192,3 haval224,3 haval256,3 haval128,4 haval160,4 haval192,4 haval224,4 haval256,4 haval128,5 haval160,5 haval192,5 haval224,5 haval256,5 

iconv

iconv support => enabled
iconv implementation => glibc
iconv library version => 2.23

Directive => Local Value => Master Value
iconv.input_encoding => no value => no value
iconv.internal_encoding => no value => no value
iconv.output_encoding => no value => no value

imap

IMAP c-Client Version => 2010
SSL Support => enabled

Directive => Local Value => Master Value
imap.enable_insecure_rsh => Off => Off

intl

Internationalization support => enabled
version => 1.1.0
ICU version => 56.1
ICU Data version => 56.1

Directive => Local Value => Master Value
intl.default_locale => no value => no value
intl.error_level => 0 => 0
intl.use_exceptions => 0 => 0

json

json support => enabled
json version => 1.2.1

ldap

LDAP Support => enabled
RCS Version => $Id: 03ca03d3adee59787d58cd342d8f864c5d96252a $
Total Links => 0/unlimited
API Version => 3001
Vendor Name => OpenLDAP
Vendor Version => 20442

Directive => Local Value => Master Value
ldap.max_links => Unlimited => Unlimited

libxml

libXML support => active
libXML Compiled Version => 2.9.5
libXML Loaded Version => 20905
libXML streams => enabled

mbstring

Multibyte Support => enabled
Multibyte string engine => libmbfl
HTTP input encoding translation => disabled
libmbfl version => 1.3.2

mbstring extension makes use of "streamable kanji code filter and converter", which is distributed under the GNU Lesser General Public License version 2.1.

Multibyte (japanese) regex support => enabled
Multibyte regex (oniguruma) backtrack check => On
Multibyte regex (oniguruma) version => 5.9.5

Directive => Local Value => Master Value
mbstring.detect_order => no value => no value
mbstring.encoding_translation => Off => Off
mbstring.func_overload => 0 => 0
mbstring.http_input => no value => no value
mbstring.http_output => no value => no value
mbstring.http_output_conv_mimetypes => ^(text/|application/xhtml\+xml) => ^(text/|application/xhtml\+xml)
mbstring.internal_encoding => no value => no value
mbstring.language => neutral => neutral
mbstring.strict_detection => Off => Off
mbstring.substitute_character => no value => no value

mcrypt

mcrypt support => enabled
mcrypt_filter support => enabled
Version => 2.5.8
Api No => 20021217
Supported ciphers => cast-128 gost rijndael-128 twofish arcfour cast-256 loki97 rijndael-192 saferplus wake blowfish-compat des rijndael-256 serpent xtea blowfish enigma rc2 tripledes 
Supported modes => cbc cfb ctr ecb ncfb nofb ofb stream 

Directive => Local Value => Master Value
mcrypt.algorithms_dir => no value => no value
mcrypt.modes_dir => no value => no value

mysql

MySQL Support => enabled
Active Persistent Links => 0
Active Links => 0
Client API version => mysqlnd 5.0.11-dev - 20120503 - $Id: 76b08b24596e12d4553bd41fc93cccd5bac2fe7a $

Directive => Local Value => Master Value
mysql.allow_local_infile => On => On
mysql.allow_persistent => On => On
mysql.connect_timeout => 60 => 60
mysql.default_host => no value => no value
mysql.default_password => no value => no value
mysql.default_port => no value => no value
mysql.default_socket => /var/run/mysql/mysql.sock => /var/run/mysql/mysql.sock
mysql.default_user => no value => no value
mysql.max_links => Unlimited => Unlimited
mysql.max_persistent => Unlimited => Unlimited
mysql.trace_mode => Off => Off

mysqli

MysqlI Support => enabled
Client API library version => mysqlnd 5.0.11-dev - 20120503 - $Id: 76b08b24596e12d4553bd41fc93cccd5bac2fe7a $
Active Persistent Links => 0
Inactive Persistent Links => 0
Active Links => 0

Directive => Local Value => Master Value
mysqli.allow_local_infile => On => On
mysqli.allow_persistent => On => On
mysqli.default_host => no value => no value
mysqli.default_port => 3306 => 3306
mysqli.default_pw => no value => no value
mysqli.default_socket => /var/run/mysql/mysql.sock => /var/run/mysql/mysql.sock
mysqli.default_user => no value => no value
mysqli.max_links => Unlimited => Unlimited
mysqli.max_persistent => Unlimited => Unlimited
mysqli.reconnect => Off => Off
mysqli.rollback_on_cached_plink => Off => Off

mysqlnd

mysqlnd => enabled
Version => mysqlnd 5.0.11-dev - 20120503 - $Id: 76b08b24596e12d4553bd41fc93cccd5bac2fe7a $
Compression => supported
core SSL => supported
extended SSL => supported
Command buffer size => 4096
Read buffer size => 32768
Read timeout => 31536000
Collecting statistics => Yes
Collecting memory statistics => No
Tracing => n/a
Loaded plugins => mysqlnd,debug_trace,auth_plugin_mysql_native_password,auth_plugin_mysql_clear_password,auth_plugin_sha256_password
API Extensions => mysql,mysqli,pdo_mysql

mysqlnd statistics =>  
bytes_sent => 0
bytes_received => 0
packets_sent => 0
packets_received => 0
protocol_overhead_in => 0
protocol_overhead_out => 0
bytes_received_ok_packet => 0
bytes_received_eof_packet => 0
bytes_received_rset_header_packet => 0
bytes_received_rset_field_meta_packet => 0
bytes_received_rset_row_packet => 0
bytes_received_prepare_response_packet => 0
bytes_received_change_user_packet => 0
packets_sent_command => 0
packets_received_ok => 0
packets_received_eof => 0
packets_received_rset_header => 0
packets_received_rset_field_meta => 0
packets_received_rset_row => 0
packets_received_prepare_response => 0
packets_received_change_user => 0
result_set_queries => 0
non_result_set_queries => 0
no_index_used => 0
bad_index_used => 0
slow_queries => 0
buffered_sets => 0
unbuffered_sets => 0
ps_buffered_sets => 0
ps_unbuffered_sets => 0
flushed_normal_sets => 0
flushed_ps_sets => 0
ps_prepared_never_executed => 0
ps_prepared_once_executed => 0
rows_fetched_from_server_normal => 0
rows_fetched_from_server_ps => 0
rows_buffered_from_client_normal => 0
rows_buffered_from_client_ps => 0
rows_fetched_from_client_normal_buffered => 0
rows_fetched_from_client_normal_unbuffered => 0
rows_fetched_from_client_ps_buffered => 0
rows_fetched_from_client_ps_unbuffered => 0
rows_fetched_from_client_ps_cursor => 0
rows_affected_normal => 0
rows_affected_ps => 0
rows_skipped_normal => 0
rows_skipped_ps => 0
copy_on_write_saved => 0
copy_on_write_performed => 0
command_buffer_too_small => 0
connect_success => 0
connect_failure => 0
connection_reused => 0
reconnect => 0
pconnect_success => 0
active_connections => 0
active_persistent_connections => 0
explicit_close => 0
implicit_close => 0
disconnect_close => 0
in_middle_of_command_close => 0
explicit_free_result => 0
implicit_free_result => 0
explicit_stmt_close => 0
implicit_stmt_close => 0
mem_emalloc_count => 0
mem_emalloc_amount => 0
mem_ecalloc_count => 0
mem_ecalloc_amount => 0
mem_erealloc_count => 0
mem_erealloc_amount => 0
mem_efree_count => 0
mem_efree_amount => 0
mem_malloc_count => 0
mem_malloc_amount => 0
mem_calloc_count => 0
mem_calloc_amount => 0
mem_realloc_count => 0
mem_realloc_amount => 0
mem_free_count => 0
mem_free_amount => 0
mem_estrndup_count => 0
mem_strndup_count => 0
mem_estndup_count => 0
mem_strdup_count => 0
proto_text_fetched_null => 0
proto_text_fetched_bit => 0
proto_text_fetched_tinyint => 0
proto_text_fetched_short => 0
proto_text_fetched_int24 => 0
proto_text_fetched_int => 0
proto_text_fetched_bigint => 0
proto_text_fetched_decimal => 0
proto_text_fetched_float => 0
proto_text_fetched_double => 0
proto_text_fetched_date => 0
proto_text_fetched_year => 0
proto_text_fetched_time => 0
proto_text_fetched_datetime => 0
proto_text_fetched_timestamp => 0
proto_text_fetched_string => 0
proto_text_fetched_blob => 0
proto_text_fetched_enum => 0
proto_text_fetched_set => 0
proto_text_fetched_geometry => 0
proto_text_fetched_other => 0
proto_binary_fetched_null => 0
proto_binary_fetched_bit => 0
proto_binary_fetched_tinyint => 0
proto_binary_fetched_short => 0
proto_binary_fetched_int24 => 0
proto_binary_fetched_int => 0
proto_binary_fetched_bigint => 0
proto_binary_fetched_decimal => 0
proto_binary_fetched_float => 0
proto_binary_fetched_double => 0
proto_binary_fetched_date => 0
proto_binary_fetched_year => 0
proto_binary_fetched_time => 0
proto_binary_fetched_datetime => 0
proto_binary_fetched_timestamp => 0
proto_binary_fetched_string => 0
proto_binary_fetched_json => 0
proto_binary_fetched_blob => 0
proto_binary_fetched_enum => 0
proto_binary_fetched_set => 0
proto_binary_fetched_geometry => 0
proto_binary_fetched_other => 0
init_command_executed_count => 0
init_command_failed_count => 0
com_quit => 0
com_init_db => 0
com_query => 0
com_field_list => 0
com_create_db => 0
com_drop_db => 0
com_refresh => 0
com_shutdown => 0
com_statistics => 0
com_process_info => 0
com_connect => 0
com_process_kill => 0
com_debug => 0
com_ping => 0
com_time => 0
com_delayed_insert => 0
com_change_user => 0
com_binlog_dump => 0
com_table_dump => 0
com_connect_out => 0
com_register_slave => 0
com_stmt_prepare => 0
com_stmt_execute => 0
com_stmt_send_long_data => 0
com_stmt_close => 0
com_stmt_reset => 0
com_stmt_set_option => 0
com_stmt_fetch => 0
com_deamon => 0
bytes_received_real_data_normal => 0
bytes_received_real_data_ps => 0

odbc

ODBC Support => enabled
Active Persistent Links => 0
Active Links => 0
ODBC library => iodbc
ODBC_INCLUDE =>  
ODBC_LFLAGS =>  
ODBC_LIBS => -liodbc -liodbcinst -ldl

Directive => Local Value => Master Value
odbc.allow_persistent => On => On
odbc.check_persistent => On => On
odbc.default_cursortype => Static cursor => Static cursor
odbc.default_db => no value => no value
odbc.default_pw => no value => no value
odbc.default_user => no value => no value
odbc.defaultbinmode => return as is => return as is
odbc.defaultlrl => return up to 4096 bytes => return up to 4096 bytes
odbc.max_links => Unlimited => Unlimited
odbc.max_persistent => Unlimited => Unlimited

openssl

OpenSSL support => enabled
OpenSSL Library Version => OpenSSL 1.0.2r  26 Feb 2019
OpenSSL Header Version => OpenSSL 1.0.2q  20 Nov 2018
Openssl default config => /etc/ssl/openssl.cnf

Directive => Local Value => Master Value
openssl.cafile => no value => no value
openssl.capath => no value => no value

pcntl

pcntl support => enabled

pcre

PCRE (Perl Compatible Regular Expressions) Support => enabled
PCRE Library Version => 8.39 2016-06-14

Directive => Local Value => Master Value
pcre.backtrack_limit => 1000000 => 1000000
pcre.recursion_limit => 100000 => 100000

PDO

PDO support => enabled
PDO drivers => mysql, sqlite, odbc

pdo_mysql

PDO Driver for MySQL => enabled
Client API version => mysqlnd 5.0.11-dev - 20120503 - $Id: 76b08b24596e12d4553bd41fc93cccd5bac2fe7a $

Directive => Local Value => Master Value
pdo_mysql.default_socket => /var/run/mysql/mysql.sock => /var/run/mysql/mysql.sock

PDO_ODBC

PDO Driver for ODBC (iODBC) => enabled
ODBC Connection Pooling => Enabled, strict matching

pdo_sqlite

PDO Driver for SQLite 3.x => enabled
SQLite Library => 3.13.0

Phar

Phar: PHP Archive support => enabled
Phar EXT version => 2.0.2
Phar API version => 1.1.1
SVN revision => $Id: 6e5cec2462a6ded53d4379ea9a69487a60d5c43c $
Phar-based phar archives => enabled
Tar-based phar archives => enabled
ZIP-based phar archives => enabled
gzip compression => enabled
bzip2 compression => enabled
OpenSSL support => enabled


Phar based on pear/PHP_Archive, original concept by Davey Shafik.
Phar fully realized by Gregory Beaver and Marcus Boerger.
Portions of tar implementation Copyright (c) 2003-2009 Tim Kientzle.
Directive => Local Value => Master Value
phar.cache_list => no value => no value
phar.readonly => On => On
phar.require_hash => On => On

posix

Revision => $Id: 5f4acc20904b1406142f2a0ede068db048c77e77 $

pspell

PSpell Support => enabled

Reflection

Reflection => enabled
Version => $Id: 5f15287237d5f78d75b19c26915aa7bd83dee8b8 $

session

Session Support => enabled
Registered save handlers => files user 
Registered serializer handlers => php_serialize php php_binary wddx 

Directive => Local Value => Master Value
session.auto_start => Off => Off
session.cache_expire => 180 => 180
session.cache_limiter => nocache => nocache
session.cookie_domain => no value => no value
session.cookie_httponly => Off => Off
session.cookie_lifetime => 0 => 0
session.cookie_path => / => /
session.cookie_secure => Off => Off
session.entropy_file => /dev/urandom => /dev/urandom
session.entropy_length => 32 => 32
session.gc_divisor => 1000 => 1000
session.gc_maxlifetime => 1440 => 1440
session.gc_probability => 1 => 1
session.hash_bits_per_character => 5 => 5
session.hash_function => 0 => 0
session.name => PHPSESSID => PHPSESSID
session.referer_check => no value => no value
session.save_handler => files => files
session.save_path => /var/lib/php => /var/lib/php
session.serialize_handler => php => php
session.upload_progress.cleanup => On => On
session.upload_progress.enabled => On => On
session.upload_progress.freq => 1% => 1%
session.upload_progress.min_freq => 1 => 1
session.upload_progress.name => PHP_SESSION_UPLOAD_PROGRESS => PHP_SESSION_UPLOAD_PROGRESS
session.upload_progress.prefix => upload_progress_ => upload_progress_
session.use_cookies => On => On
session.use_only_cookies => On => On
session.use_strict_mode => Off => Off
session.use_trans_sid => 0 => 0

shmop

shmop support => enabled

SimpleXML

Simplexml support => enabled
Revision => $Id: d7077fc935154236afb4fe70814ba358efdbdca4 $
Schema support => enabled

snmp

NET-SNMP Support => enabled
NET-SNMP Version => 5.7.3
PHP SNMP Version => 0.1

soap

Soap Client => enabled
Soap Server => enabled

Directive => Local Value => Master Value
soap.wsdl_cache => 1 => 1
soap.wsdl_cache_dir => /tmp => /tmp
soap.wsdl_cache_enabled => 1 => 1
soap.wsdl_cache_limit => 5 => 5
soap.wsdl_cache_ttl => 86400 => 86400

sockets

Sockets Support => enabled

SPL

SPL support => enabled
Interfaces => Countable, OuterIterator, RecursiveIterator, SeekableIterator, SplObserver, SplSubject
Classes => AppendIterator, ArrayIterator, ArrayObject, BadFunctionCallException, BadMethodCallException, CachingIterator, CallbackFilterIterator, DirectoryIterator, DomainException, EmptyIterator, FilesystemIterator, FilterIterator, GlobIterator, InfiniteIterator, InvalidArgumentException, IteratorIterator, LengthException, LimitIterator, LogicException, MultipleIterator, NoRewindIterator, OutOfBoundsException, OutOfRangeException, OverflowException, ParentIterator, RangeException, RecursiveArrayIterator, RecursiveCachingIterator, RecursiveCallbackFilterIterator, RecursiveDirectoryIterator, RecursiveFilterIterator, RecursiveIteratorIterator, RecursiveRegexIterator, RecursiveTreeIterator, RegexIterator, RuntimeException, SplDoublyLinkedList, SplFileInfo, SplFileObject, SplFixedArray, SplHeap, SplMinHeap, SplMaxHeap, SplObjectStorage, SplPriorityQueue, SplQueue, SplStack, SplTempFileObject, UnderflowException, UnexpectedValueException

sqlite3

SQLite3 support => enabled
SQLite3 module version => 0.7-dev
SQLite Library => 3.8.10.2

Directive => Local Value => Master Value
sqlite3.extension_dir => no value => no value

standard

Dynamic Library Support => enabled
Path to sendmail => /usr/sbin/sendmail -t -i 

Directive => Local Value => Master Value
assert.active => 1 => 1
assert.bail => 0 => 0
assert.callback => no value => no value
assert.quiet_eval => 0 => 0
assert.warning => 1 => 1
auto_detect_line_endings => 0 => 0
default_socket_timeout => 60 => 60
from => no value => no value
url_rewriter.tags => a=href,area=href,frame=src,input=src,form=fakeentry => a=href,area=href,frame=src,input=src,form=fakeentry
user_agent => no value => no value

sysvmsg

sysvmsg support => enabled
Revision => $Id: 58590192720bc56939152fde3645d808b348bb9b $

tokenizer

Tokenizer Support => enabled

wddx

WDDX Support => enabled
WDDX Session Serializer => enabled

xml

XML Support => active
XML Namespace Support => active
libxml2 Version => 2.9.5

xmlreader

XMLReader => enabled

xmlwriter

XMLWriter => enabled

xsl

XSL => enabled
libxslt Version => 1.1.29
libxslt compiled against libxml Version => 2.9.4
EXSLT => enabled
libexslt Version => 1.1.29

Zend OPcache

Opcode Caching => Disabled
Optimization => Disabled
Startup Failed => Opcode Caching is disabled for CLI

Directive => Local Value => Master Value
opcache.blacklist_filename => no value => no value
opcache.consistency_checks => 0 => 0
opcache.dups_fix => Off => Off
opcache.enable => On => On
opcache.enable_cli => Off => Off
opcache.enable_file_override => Off => Off
opcache.error_log => no value => no value
opcache.fast_shutdown => 0 => 0
opcache.file_update_protection => 2 => 2
opcache.force_restart_timeout => 180 => 180
opcache.inherited_hack => On => On
opcache.interned_strings_buffer => 4 => 4
opcache.load_comments => 1 => 1
opcache.log_verbosity_level => 1 => 1
opcache.max_accelerated_files => 2000 => 2000
opcache.max_file_size => 0 => 0
opcache.max_wasted_percentage => 5 => 5
opcache.memory_consumption => 64 => 64
opcache.optimization_level => 0x7FFFBFFF => 0x7FFFBFFF
opcache.preferred_memory_model => no value => no value
opcache.protect_memory => 0 => 0
opcache.restrict_api => no value => no value
opcache.revalidate_freq => 2 => 2
opcache.revalidate_path => Off => Off
opcache.save_comments => 1 => 1
opcache.use_cwd => On => On
opcache.validate_permission => Off => Off
opcache.validate_root => Off => Off
opcache.validate_timestamps => On => On

zip

Zip => enabled
Zip version => 1.12.5
Libzip version => 0.11.2

zlib

ZLib Support => enabled
Stream Wrapper => compress.zlib://
Stream Filter => zlib.inflate, zlib.deflate
Compiled Version => 1.2.11
Linked Version => 1.2.11

Directive => Local Value => Master Value
zlib.output_compression => Off => Off
zlib.output_compression_level => -1 => -1
zlib.output_handler => no value => no value

Additional Modules

Module Name
sysvsem
sysvshm

Environment

Variable => Value
CPLUS_INCLUDE_PATH => /usr/lib64/qt/include
MANPATH => /usr/local/man:/usr/man:/usr/lib64/java/man:/usr/share/texmf/man
HZ => 100
HOSTNAME => caitlyn.espersunited.com
SHELL => /bin/bash
TERM => xterm
QT5DIR => /usr/lib64/qt5
VBOX_SDK_PATH => /usr/share/virtualbox/sdk/
ANT_HOME => /usr/share/ant
USER => root
LS_COLORS => no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.bat=01;32:*.BAT=01;32:*.btm=01;32:*.BTM=01;32:*.cmd=01;32:*.CMD=01;32:*.com=01;32:*.COM=01;32:*.dll=01;32:*.DLL=01;32:*.exe=01;32:*.EXE=01;32:*.7z=01;31:*.ace=01;31:*.ACE=01;31:*.arj=01;31:*.bz2=01;31:*.cpio=01;31:*.deb=01;31:*.dz=01;31:*.gz=01;31:*.jar=01;31:*.lzh=01;31:*.lzma=01;31:*.rar=01;31:*.RAR=01;31:*.rpm=01;31:*.rz=01;31:*.tar=01;31:*.taz=01;31:*.tb2=01;31:*.tbz2=01;31:*.tbz=01;31:*.tgz=01;31:*.tlz=01;31:*.trz=01;31:*.txz=01;31:*.tz=01;31:*.tz2=01;31:*.xz=01;31:*.z=01;31:*.Z=01;31:*.zip=01;31:*.ZIP=01;31:*.zoo=01;31:*.aac=01;35:*.AAC=01;35:*.anx=01;35:*.asf=01;35:*.ASF=01;35:*.au=01;35:*.axa=01;35:*.axv=01;35:*.avi=01;35:*.AVI=01;35:*.bmp=01;35:*.BMP=01;35:*.divx=01;35:*.DIVX=01;35:*.flac=01;35:*.FLAC=01;35:*.gif=01;35:*.GIF=01;35:*.jpg=01;35:*.JPG=01;35:*.jpeg=01;35:*.JPEG=01;35:*.m2a=01;35:*.M2A=01;35:*.m2v=01;35:*.M2V=01;35:*.m4a=01;35:*.M4A=01;35:*.m4p=01;35:*.M4P=01;35:*.m4v=01;35:*.M4V=01;35:*.mid=01;35:*.midi=01;35:*.mka=01;35:*.mkv=01;35:*.MKV=01;35:*.mov=01;35:*.MOV=01;35:*.mp3=01;35:*.MP3=01;35:*.mp4=01;35:*.MP4=01;35:*.mp4v=01;35:*.mpc=01;35:*.MPC=01;35:*.mpeg=01;35:*.MPEG=01;35:*.mpg=01;35:*.MPG=01;35:*.nuv=01;35:*.oga=01;35:*.ogv=01;35:*.ogx=01;35:*.ogg=01;35:*.OGG=01;35:*.pbm=01;35:*.pgm=01;35:*.png=01;35:*.PNG=01;35:*.ppm=01;35:*.qt=01;35:*.ra=01;35:*.RA=01;35:*.ram=01;35:*.RAM=01;35:*.rm=01;35:*.RM=01;35:*.spx=01;35:*.svg=01;35:*.svgz=01;35:*.tga=01;35:*.TGA=01;35:*.tif=01;35:*.TIF=01;35:*.tiff=01;35:*.TIFF=01;35:*.vob=01;35:*.VOB=01;35:*.wav=01;35:*.WAV=01;35:*.wma=01;35:*.WMA=01;35:*.wmv=01;35:*.WMV=01;35:*.xbm=01;35:*.xcf=01;35:*.xpm=01;35:*.xspf=01;35:*.xwd=01;35:*.XWD=01;35:*.xvid=01;35:
GDK_USE_XFT => 1
VBOX_PROGRAM_PATH => /usr/lib64/virtualbox/
T1LIB_CONFIG => /usr/share/t1lib/t1lib.config
XDG_CONFIG_DIRS => /etc/xdg:/etc/kde/xdg
DSSI_PATH => /usr/lib64/dssi
MINICOM => -c on
MAIL => /var/spool/mail/root
PATH => /usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/lib64/kde4/libexec:/usr/lib64/java/bin:/usr/lib64/java/jre/bin:/usr/lib64/qt/bin:/usr/lib64/qt5/bin:/usr/share/texmf/bin
INPUTRC => /etc/inputrc
PWD => /var/www/htdocs
JAVA_HOME => /usr/lib64/java
VDPAU_LOG => 0
LANG => en_US.UTF-8
QT4DIR => /usr/lib64/qt
KDEDIRS => /usr
PS1 => \u@\h:\w\$ 
PS2 => > 
SHLVL => 1
HOME => /root
LS_OPTIONS => -F -b -T 0 --color=auto
G_FILENAME_ENCODING => @locale
LESS => -M
LOGNAME => root
XDG_DATA_DIRS => /root/.local/share/flatpak/exports/share:/var/lib/flatpak/exports/share:/usr/local/share:/usr/share
PKG_CONFIG_PATH => /usr/local/lib64/pkgconfig:/usr/local/share/pkgconfig:/usr/lib64/pkgconfig:/usr/share/pkgconfig
LESSOPEN => |lesspipe.sh %s
DISPLAY => :0.0
LADSPA_PATH => /usr/lib64/ladspa
G_BROKEN_FILENAMES => 1
COLORTERM => xfce4-terminal
_ => /usr/bin/php
OLDPWD => /root

PHP Variables

Variable => Value
_SERVER["CPLUS_INCLUDE_PATH"] => /usr/lib64/qt/include
_SERVER["MANPATH"] => /usr/local/man:/usr/man:/usr/lib64/java/man:/usr/share/texmf/man
_SERVER["HZ"] => 100
_SERVER["HOSTNAME"] => caitlyn.espersunited.com
_SERVER["SHELL"] => /bin/bash
_SERVER["TERM"] => xterm
_SERVER["QT5DIR"] => /usr/lib64/qt5
_SERVER["VBOX_SDK_PATH"] => /usr/share/virtualbox/sdk/
_SERVER["ANT_HOME"] => /usr/share/ant
_SERVER["USER"] => root
_SERVER["LS_COLORS"] => no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.bat=01;32:*.BAT=01;32:*.btm=01;32:*.BTM=01;32:*.cmd=01;32:*.CMD=01;32:*.com=01;32:*.COM=01;32:*.dll=01;32:*.DLL=01;32:*.exe=01;32:*.EXE=01;32:*.7z=01;31:*.ace=01;31:*.ACE=01;31:*.arj=01;31:*.bz2=01;31:*.cpio=01;31:*.deb=01;31:*.dz=01;31:*.gz=01;31:*.jar=01;31:*.lzh=01;31:*.lzma=01;31:*.rar=01;31:*.RAR=01;31:*.rpm=01;31:*.rz=01;31:*.tar=01;31:*.taz=01;31:*.tb2=01;31:*.tbz2=01;31:*.tbz=01;31:*.tgz=01;31:*.tlz=01;31:*.trz=01;31:*.txz=01;31:*.tz=01;31:*.tz2=01;31:*.xz=01;31:*.z=01;31:*.Z=01;31:*.zip=01;31:*.ZIP=01;31:*.zoo=01;31:*.aac=01;35:*.AAC=01;35:*.anx=01;35:*.asf=01;35:*.ASF=01;35:*.au=01;35:*.axa=01;35:*.axv=01;35:*.avi=01;35:*.AVI=01;35:*.bmp=01;35:*.BMP=01;35:*.divx=01;35:*.DIVX=01;35:*.flac=01;35:*.FLAC=01;35:*.gif=01;35:*.GIF=01;35:*.jpg=01;35:*.JPG=01;35:*.jpeg=01;35:*.JPEG=01;35:*.m2a=01;35:*.M2A=01;35:*.m2v=01;35:*.M2V=01;35:*.m4a=01;35:*.M4A=01;35:*.m4p=01;35:*.M4P=01;35:*.m4v=01;35:*.M4V=01;35:*.mid=01;35:*.midi=01;35:*.mka=01;35:*.mkv=01;35:*.MKV=01;35:*.mov=01;35:*.MOV=01;35:*.mp3=01;35:*.MP3=01;35:*.mp4=01;35:*.MP4=01;35:*.mp4v=01;35:*.mpc=01;35:*.MPC=01;35:*.mpeg=01;35:*.MPEG=01;35:*.mpg=01;35:*.MPG=01;35:*.nuv=01;35:*.oga=01;35:*.ogv=01;35:*.ogx=01;35:*.ogg=01;35:*.OGG=01;35:*.pbm=01;35:*.pgm=01;35:*.png=01;35:*.PNG=01;35:*.ppm=01;35:*.qt=01;35:*.ra=01;35:*.RA=01;35:*.ram=01;35:*.RAM=01;35:*.rm=01;35:*.RM=01;35:*.spx=01;35:*.svg=01;35:*.svgz=01;35:*.tga=01;35:*.TGA=01;35:*.tif=01;35:*.TIF=01;35:*.tiff=01;35:*.TIFF=01;35:*.vob=01;35:*.VOB=01;35:*.wav=01;35:*.WAV=01;35:*.wma=01;35:*.WMA=01;35:*.wmv=01;35:*.WMV=01;35:*.xbm=01;35:*.xcf=01;35:*.xpm=01;35:*.xspf=01;35:*.xwd=01;35:*.XWD=01;35:*.xvid=01;35:
_SERVER["GDK_USE_XFT"] => 1
_SERVER["VBOX_PROGRAM_PATH"] => /usr/lib64/virtualbox/
_SERVER["T1LIB_CONFIG"] => /usr/share/t1lib/t1lib.config
_SERVER["XDG_CONFIG_DIRS"] => /etc/xdg:/etc/kde/xdg
_SERVER["DSSI_PATH"] => /usr/lib64/dssi
_SERVER["MINICOM"] => -c on
_SERVER["MAIL"] => /var/spool/mail/root
_SERVER["PATH"] => /usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/lib64/kde4/libexec:/usr/lib64/java/bin:/usr/lib64/java/jre/bin:/usr/lib64/qt/bin:/usr/lib64/qt5/bin:/usr/share/texmf/bin
_SERVER["INPUTRC"] => /etc/inputrc
_SERVER["PWD"] => /var/www/htdocs
_SERVER["JAVA_HOME"] => /usr/lib64/java
_SERVER["VDPAU_LOG"] => 0
_SERVER["LANG"] => en_US.UTF-8
_SERVER["QT4DIR"] => /usr/lib64/qt
_SERVER["KDEDIRS"] => /usr
_SERVER["PS1"] => \u@\h:\w\$ 
_SERVER["PS2"] => > 
_SERVER["SHLVL"] => 1
_SERVER["HOME"] => /root
_SERVER["LS_OPTIONS"] => -F -b -T 0 --color=auto
_SERVER["G_FILENAME_ENCODING"] => @locale
_SERVER["LESS"] => -M
_SERVER["LOGNAME"] => root
_SERVER["XDG_DATA_DIRS"] => /root/.local/share/flatpak/exports/share:/var/lib/flatpak/exports/share:/usr/local/share:/usr/share
_SERVER["PKG_CONFIG_PATH"] => /usr/local/lib64/pkgconfig:/usr/local/share/pkgconfig:/usr/lib64/pkgconfig:/usr/share/pkgconfig
_SERVER["LESSOPEN"] => |lesspipe.sh %s
_SERVER["DISPLAY"] => :0.0
_SERVER["LADSPA_PATH"] => /usr/lib64/ladspa
_SERVER["G_BROKEN_FILENAMES"] => 1
_SERVER["COLORTERM"] => xfce4-terminal
_SERVER["_"] => /usr/bin/php
_SERVER["OLDPWD"] => /root
_SERVER["PHP_SELF"] => info.php
_SERVER["SCRIPT_NAME"] => info.php
_SERVER["SCRIPT_FILENAME"] => info.php
_SERVER["PATH_TRANSLATED"] => info.php
_SERVER["DOCUMENT_ROOT"] => 
_SERVER["REQUEST_TIME_FLOAT"] => 1557872445.728
_SERVER["REQUEST_TIME"] => 1557872445
_SERVER["argv"] => Array
(
    [0] => info.php
)

_SERVER["argc"] => 1

PHP License
This program is free software; you can redistribute it and/or modify
it under the terms of the PHP License as published by the PHP Group
and included in the distribution in the file:  LICENSE

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

If you did not receive a copy of the PHP license, or have any
questions about PHP licensing, please contact license@php.net.

Last edited by maschelsea; 05-14-2019 at 05:34 PM.
 
Old 05-14-2019, 05:35 PM   #10
maschelsea
Member
 
Registered: Dec 2016
Distribution: Slackware 64bit 14.2
Posts: 310

Original Poster
Rep: Reputation: Disabled
Thank you for trying to help me solve this. I really think that the problem lies with apache and not php. Maybe the way that mod_php is interfaced with apache?
 
Old 05-14-2019, 11:57 PM   #11
bassmadrigal
LQ Guru
 
Registered: Nov 2003
Location: West Jordan, UT, USA
Distribution: Slackware
Posts: 5,959

Rep: Reputation: 3655Reputation: 3655Reputation: 3655Reputation: 3655Reputation: 3655Reputation: 3655Reputation: 3655Reputation: 3655Reputation: 3655Reputation: 3655Reputation: 3655
Normally it is an extremely easy process to get php working with apache, following the simple points that ponce posted above. I have enabled it on several of my installations using those exact same steps without issue.

Can you verify your apache and php install versions?

Code:
ls -1 /var/log/packages/{httpd,php}*
 
Old 05-15-2019, 09:54 AM   #12
maschelsea
Member
 
Registered: Dec 2016
Distribution: Slackware 64bit 14.2
Posts: 310

Original Poster
Rep: Reputation: Disabled
Quote:
Originally Posted by bassmadrigal View Post
Normally it is an extremely easy process to get php working with apache, following the simple points that ponce posted above. I have enabled it on several of my installations using those exact same steps without issue.

Can you verify your apache and php install versions?

Code:
ls -1 /var/log/packages/{httpd,php}*
Code:
root@caitlyn:~# ls -1 /var/log/packages/{httpd,php}*
/var/log/packages/httpd-2.4.39-x86_64-1_slack14.2
/var/log/packages/php-5.6.40-x86_64-1_slack14.2
/var/log/packages/phpmyadmin-4.8.3-noarch-1_SBo
 
Old 05-15-2019, 10:13 AM   #13
maschelsea
Member
 
Registered: Dec 2016
Distribution: Slackware 64bit 14.2
Posts: 310

Original Poster
Rep: Reputation: Disabled
UPDATE: I just noticed that the tab which was open to the info.php file in seamonkey is now displaying correctly. PHPMyAdmin still shows me PHP code. That's the one I really need. Whatever it is that you're advising me to do so far is apparently working, but we're not there yet. Thank you for your help so far.
 
Old 05-15-2019, 10:36 AM   #14
ponce
Senior Member
 
Registered: Aug 2004
Location: Pisa, Italy
Distribution: Slackware
Posts: 4,757

Rep: Reputation: Disabled
Quote:
Originally Posted by ponce View Post
Quote:
Originally Posted by maschelsea View Post
And from /var/log/httpd/php_errors.log:
Code:
root@caitlyn:~# cat /var/log/httpd/php_errors.log 
[14-May-2019 16:03:15 UTC] PHP Warning:  require_once(./libraries/vendor_config.php): failed to open stream: No such file or directory in /var/www/htdocs/phpmyadmin/libraries/common.inc.php on line 74
[14-May-2019 16:03:15 UTC] PHP Fatal error:  require_once(): Failed opening required './libraries/vendor_config.php' (include_path='.:/usr/lib64/php') in /var/www/htdocs/phpmyadmin/libraries/common.inc.php on line 74
that seems to say that your phpmyadmin installation is incomplete.
maybe reinstalling it should be enough.
 
1 members found this post helpful.
Old 05-15-2019, 10:40 AM   #15
maschelsea
Member
 
Registered: Dec 2016
Distribution: Slackware 64bit 14.2
Posts: 310

Original Poster
Rep: Reputation: Disabled
You're right! That fixed it right up! Thank you!
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
LXer: Boot Repair Tool - Repair The Most Boot Related Problems LXer Syndicated Linux News 0 06-21-2017 09:49 PM
Message: A database connection error has been detected, we are attempting to repair the server, if the repair does not resolve the issue, pl deva420patra Linux - Server 4 11-23-2016 07:40 AM
I need a Linux OS other than Ubuntu which has a repair disk or repair software jhmac77 Linux - Newbie 1 03-17-2008 07:04 AM
program to repair broken video files exodist Linux - Software 4 12-11-2006 03:27 PM
How to repair a broken xorg.conf. incomingfire Linux - Hardware 2 12-06-2006 02:58 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware

All times are GMT -5. The time now is 12:09 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration