Pb install on hp netserver
Hello,
I try to install slackware 9.1 on the following configuration: HP Netserver LH+ with: - 2x166 Mhz Pentium cpu - 5x4Go scsi hard drives - 1x20Go DAT - 1xscsi toshiba cdrom - 1xraid controler mylex dac960P I cannot boot with the raid.s image (kernel panic), but I can with adaptec.s. The problem starts when I have to define linux partition : I can't see any drive! the mount command return: /dev/fd2 on / type ext2 (rw) proc on /proc type proc (rw) I also tried the following commands: fdisk /dev/hda fdisk /dev/sda fdisk /dev/rd/c0d0 fdisk /dev/rd/c0d0p0 fdisk /dev/rd/c1d1 fdisk /dev/rd/c1d1p1 fdisk /dev/ida/c0d0 fdisk /dev/ida/c0d0p0 fdisk /dev/ida/c1d1 fdisk /dev/ida/c1d1p1 and each time the same result : unable to open /dev/[device] Does anyone know what should I do to access my HD? |
try cfdisk, it's newer and easier to use than fdisk.
|
I'll try it. But I think it's just a better look and feel than fdisk, and I'm not sure it will solve my problem.
|
All times are GMT -5. The time now is 10:45 AM. |