LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Slackware (https://www.linuxquestions.org/questions/slackware-14/)
-   -   Mount internal card reader (https://www.linuxquestions.org/questions/slackware-14/mount-internal-card-reader-278170/)

sporks 01-15-2005 03:36 PM
Mount internal card reader
 
Hey all, I'm having a bit of a conundrum. I can't get Slackware to recognize my internal 9 in 1 card reader and mount my CF card that's inserted.

I have two other USB flash devices that show up as SCSI devices but I can't figure this one out.

How do I detect which /dev/sd* it is and mount it?

Before you suggest it's unsuported SuSE 9.0 Pro automagically detected and mounted it.

sporks 01-15-2005 05:49 PM
Output of "cat /proc/scsi/scsi"

Code:
Attached devices:
Host: scsi1 Channel: 00 Id: 00 Lun: 00
  Vendor: Generic  Model: USB SD Reader    Rev: 1.00
  Type:  Direct-Access                    ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 00 Lun: 00
  Vendor: GENERIC  Model: USB FLASH DISK  Rev: CCCC
  Type:  Direct-Access                    ANSI SCSI revision: 02
Now how do I use this info or is it useful to me in this case?

Right now my CF card is the only thing I have in the computer both USB Flash drives are out.

H2O-linux 01-15-2005 10:04 PM
what does /var/log/dmesg/ show?

sporks 01-15-2005 10:18 PM
/var/log/dmesg shows:
Code:
Linux version 2.4.28 (root@midas) (gcc version 3.3.4) #6 Tue Dec 14 14:41:15 PST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001f7f0000 (usable)
 BIOS-e820: 000000001f7f0000 - 000000001f7f3000 (ACPI NVS)
 BIOS-e820: 000000001f7f3000 - 000000001f800000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
503MB LOWMEM available.
On node 0 totalpages: 129008
zone(0): 4096 pages.
zone(1): 124912 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=Slackware ro root=302 ide=nodma acpi=off apm=off
ide_setup: ide=nodma : Prevented DMA
Initializing CPU#0
Detected 2666.316 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 5321.52 BogoMIPS
Memory: 507244k/516032k available (1826k kernel code, 8400k reserved, 606k data, 120k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 256K
CPU:    After generic, caps: bfebfbff 00000000 00000000 00000000
CPU:            Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Celeron(R) CPU 2.66GHz stepping 04
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb9b0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
PCI: Using IRQ router PIIX/ICH [8086/24c0] at 00:1f.0
PCI: Found IRQ 10 for device 00:1d.0
PCI: Sharing IRQ 10 with 00:02.0
PCI: Found IRQ 3 for device 00:1d.1
PCI: Sharing IRQ 3 with 01:0b.0
PCI: Found IRQ 9 for device 00:1d.2
PCI: Sharing IRQ 9 with 00:1f.1
PCI: Found IRQ 11 for device 00:1d.7
PCI: Sharing IRQ 11 with 01:0c.0
PCI: Sharing IRQ 11 with 01:0d.0
PCI: Found IRQ 5 for device 00:1f.3
PCI: Sharing IRQ 5 with 00:1f.5
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
vesafb: framebuffer at 0xe0000000, mapped to 0xe000d000, size 1536k
vesafb: mode is 1024x768x8, linelength=1024, pages=9
vesafb: protected mode interface info at a5f3:1f5f
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10f
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 00:1f.1
PCI: Found IRQ 9 for device 00:1f.1
PCI: Sharing IRQ 9 with 00:1d.2
ICH4: chipset revision 2
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
hda: ST380011A, ATA DISK drive
hdc: HL-DT-STDVDRRW GWA-4083B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=10337/240/63
hdc: attached ide-cdrom driver.
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.12
Partition check:
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 >
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
  8regs    :  2916.800 MB/sec
  32regs    :  1960.000 MB/sec
  pIII_sse  :  4615.600 MB/sec
  pII_mmx  :  2901.200 MB/sec
  p5_mmx    :  2904.400 MB/sec
raid5: using function: pIII_sse (4615.600 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.8(17/11/2003)
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
FAT: bogus logical sector size 0
UMSDOS: msdos_read_super failed, mount aborted.
FAT: bogus logical sector size 0
FAT: bogus logical sector size 0
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,2)) ...
for (ide0(3,2))
ide0(3,2):Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 120k freed
Adding Swap: 529192k swap-space (priority -1)
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Tungsten Graphics version 20040405
agpgart: Maximum main memory to use for agp memory: 431M
agpgart: Detected an Intel(R) 845G Chipset.
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xe0000000
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,5)) ...
for (ide0(3,5))
ide0(3,5):Using r5 hash to sort names
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,6)) ...
for (ide0(3,6))
ide0(3,6):Using r5 hash to sort names
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,7)) ...
for (ide0(3,7))
ide0(3,7):Using r5 hash to sort names
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,8)) ...
for (ide0(3,8))
ide0(3,8):Using r5 hash to sort names
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,9)) ...
for (ide0(3,9))
ide0(3,9):Using r5 hash to sort names
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,10)) ...
for (ide0(3,10))
ide0(3,10):Using r5 hash to sort names

H2O-linux 01-15-2005 10:24 PM
see if this helps
 
here

sporks 01-15-2005 10:26 PM
Will do in the AM, thanks H2O.

'Preciate the help, I'm much obliged.

sporks 01-16-2005 09:47 AM
HOT DOG!

I got it.

Took a bit of tweaking and rereading and following links but I got it to work.

Thanks for the link.


All times are GMT -5. The time now is 07:18 AM.