| perry |
08-04-2007 11:44 AM |
Quote:
Originally Posted by SCerovec
this might be related to the new hotplug+HAl system
try what You find in dmesg
And, yes, sleep in peace, it's Slackware ;)
|
if i manage to get your attention again, feel free to quickly review my dmesg:
Code:
Linux version 2.6.21.5-smp (root@midas) (gcc version 4.1.2) #1 SMP Tue Jun 19 14:52:25 CDT 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000005fef0000 end: 000000005fff0000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000005fff0000 size: 0000000000008000 end: 000000005fff8000 type: 3
copy_e820_map() start: 000000005fff8000 size: 0000000000008000 end: 0000000060000000 type: 4
copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000005fff0000 (usable)
BIOS-e820: 000000005fff0000 - 000000005fff8000 (ACPI data)
BIOS-e820: 000000005fff8000 - 0000000060000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
639MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fb8f0
Entering add_active_range(0, 0, 393200) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 393200
early_node_map[1] active PFN ranges
0: 0 -> 393200
On node 0 totalpages: 393200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 1279 pages used for memmap
HighMem zone: 162545 pages, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP 000F9F30, 0014 (r0 AMI )
ACPI: RSDT 5FFF0000, 002C (r1 AMIINT VIA_K8 10 MSFT 97)
ACPI: FACP 5FFF0030, 0081 (r1 AMIINT VIA_K8 11 MSFT 97)
ACPI: DSDT 5FFF0120, 36C5 (r1 VIA VIA_K8 1000 MSFT 100000D)
ACPI: FACS 5FFF8000, 0040
ACPI: APIC 5FFF00C0, 0054 (r1 AMIINT VIA_K8 9 MSFT 97)
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:12 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 70000000 (gap: 60000000:9ec00000)
Built 1 zonelists. Total pages: 390129
Kernel command line: BOOT_IMAGE=slack12.0 ro root=30f
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2000.257 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1553748k/1572800k available (2658k kernel code, 17924k reserved, 1046k data, 268k init, 655296k highmem)
virtual kernel memory layout:
fixmap : 0xffe17000 - 0xfffff000 (1952 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc04a6000 - 0xc04e9000 ( 268 kB)
.data : 0xc039892d - 0xc049e374 (1046 kB)
.text : 0xc0100000 - 0xc039892d (2658 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4003.90 BogoMIPS (lpj=8007815)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000410 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 14k freed
ACPI: Core revision 20070126
CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 00
Total of 1 processors activated (4003.90 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
Brought up 1 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdab1, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: MSI-K8T-Neo2Fir, attempting to turn soundcard ON
PCI: MSI-K8T-Neo2Fir, soundcard on
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
SCSI subsystem initialized
libata version 2.20 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:04: iomem range 0xfee00000-0xfee00fff could not be reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
IO window: c000-cfff
MEM window: cfe00000-cfefffff
PREFETCH window: 8fd00000-cfcfffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 483k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0xb0000000, mapped to 0xf8880000, using 1536k, total 16384k
vesafb: mode is 1024x768x8, linelength=1024, pages=20
vesafb: protected mode interface info at c000:5806
vesafb: pmi: set display start = c00c589a, set palette = c00c58e6
vesafb: pmi: ports = c810 c816 c854 c838 c83c c85c c800 c804 c8b0 c8b2 c8b4
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Switched to high resolution mode on CPU 0
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
input: Macintosh mouse button emulation as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:0f.0
ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 20 (level, low) -> IRQ 16
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: ST340014A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-ST GCE-8526B, ATAPI CD/DVD-ROM drive
hdd: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 hda14 hda15 >
hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33)
ide-floppy driver 0.99.newide
Loading iSCSI transport class v2.0-724.
usbmon: debugfs is not available
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int32x1 772 MB/s
raid6: int32x2 855 MB/s
raid6: int32x4 745 MB/s
raid6: int32x8 449 MB/s
raid6: mmxx1 1645 MB/s
raid6: mmxx2 2933 MB/s
raid6: sse1x1 1375 MB/s
raid6: sse1x2 2242 MB/s
raid6: sse2x1 2327 MB/s
raid6: sse2x2 3212 MB/s
raid6: using algorithm sse2x2 (3212 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 6153.000 MB/sec
raid5: using function: pIII_sse (6153.000 MB/sec)
md: multipath personality registered for level -4
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 268k freed
input: AT Translated Set 2 keyboard as /class/input/input1
ReiserFS: hda15: found reiserfs format "3.6" with standard journal
ReiserFS: hda15: using ordered data mode
ReiserFS: hda15: journal params: device hda15, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda15: checking transaction log (hda15)
ReiserFS: hda15: Using r5 hash to sort names
ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 17
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: irq 17, io mem 0xcffffd00
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
Linux agpgart interface v0.102 (c) Dave Jones
r8169 Gigabit Ethernet driver 2.2LK loaded
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 16 (level, low) -> IRQ 18
eth0: RTL8169s/8110s at 0xf8836f00, 00:11:09:84:96:1b, IRQ 18
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 17
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 17, io base 0x0000dc00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 17
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 17, io base 0x0000e000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-1: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 17
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 17, io base 0x0000e400
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 17
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 17, io base 0x0000e800
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
agpgart: Detected AGP bridge 0
agpgart: AGP aperture is 128M @ 0xd0000000
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:11.5 to 64
usb 1-4: new high speed USB device using ehci_hcd and address 3
usb 1-4: configuration #1 chosen from 1 choice
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
usb 1-7: new high speed USB device using ehci_hcd and address 4
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 1413 MBytes.
[fglrx] USWC is disabled in module parameters
[fglrx] PAT is disabled!
[fglrx] module loaded - fglrx 8.39.4 [Jul 20 2007] on minor 0
usb 1-7: configuration #2 chosen from 1 choice
usb 1-8: new high speed USB device using ehci_hcd and address 5
usb 1-8: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
usb 1-1.3: new full speed USB device using ehci_hcd and address 6
usb 1-1.3: configuration #1 chosen from 1 choice
usb 1-1.4: new full speed USB device using ehci_hcd and address 7
usb 1-1.4: configuration #1 chosen from 1 choice
usb 1-4.4: new high speed USB device using ehci_hcd and address 8
usb 1-4.4: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
scsi3 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 8
usb-storage: waiting for device to settle before scanning
Adding 1052216k swap on /dev/hda11. Priority:-1 extents:1 across:1052216k
input: PC Speaker as /class/input/input2
input: ImPS/2 Generic Wheel Mouse as /class/input/input3
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (interrupt-driven).
lp0: console ready
Capability LSM initialized
scsi 0:0:0:0: Direct-Access MAXTOR 4 K040H2 A08. PQ: 0 ANSI: 0 CCS
SCSI device sda: 78198750 512-byte hdwr sectors (40038 MB)
scsi 1:0:0:0: Direct-Access CanonUSA Photo Card RW 1 0001 PQ: 0 ANSI: 0 CCS
sda: test WP failed, assume Write Enabled
sda: assuming drive cache: write through
SCSI device sdb: 31360 512-byte hdwr sectors (16 MB)
SCSI device sda: 78198750 512-byte hdwr sectors (40038 MB)
scsi 3:0:0:0: Direct-Access Initio ST3320620AS 4.36 PQ: 0 ANSI: 0
scsi 2:0:0:0: Direct-Access MITSUMI USB FDD 1039 PQ: 0 ANSI: 0 CCS
sdb: Write Protect is off
sdb: Mode Sense: 4b 00 00 08
sdb: assuming drive cache: write through
SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB)
sda: test WP failed, assume Write Enabled
sda: assuming drive cache: write through
sda:<5>sdc: Write Protect is off
sdc: Mode Sense: 00 00 00 00
sdc: assuming drive cache: write through
sda1
sd 0:0:0:0: Attached scsi disk sda
SCSI device sdb: 31360 512-byte hdwr sectors (16 MB)
SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB)
usb-storage: device scan complete
sdb: Write Protect is off
sdb: Mode Sense: 4b 00 00 08
sdb: assuming drive cache: write through
sdb:<5>sdc: Write Protect is off
sdc: Mode Sense: 00 00 00 00
sdc: assuming drive cache: write through
sdc: sdb1
sd 1:0:0:0: Attached scsi removable disk sdb
sdc1 sdc2 sdc3 <<7>usb-storage: device scan complete
sdc5 sdc6 >
sd 3:0:0:0: Attached scsi disk sdc
usb-storage: device scan complete
sd 2:0:0:0: Attached scsi removable disk sdd
usb-storage: device scan complete
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: Attached scsi generic sg3 type 0
ReiserFS: hda5: found reiserfs format "3.6" with standard journal
ReiserFS: hda5: using ordered data mode
ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda5: checking transaction log (hda5)
ReiserFS: hda5: Using r5 hash to sort names
ReiserFS: hda6: found reiserfs format "3.6" with standard journal
ReiserFS: hda6: using ordered data mode
ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda6: checking transaction log (hda6)
ReiserFS: hda6: Using r5 hash to sort names
ReiserFS: hda8: found reiserfs format "3.5" with standard journal
ReiserFS: hda8: using ordered data mode
ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda8: checking transaction log (hda8)
ReiserFS: hda8: Using r5 hash to sort names
ReiserFS: hda8: using 3.5.x disk format
ReiserFS: hda9: found reiserfs format "3.5" with standard journal
ReiserFS: hda9: using ordered data mode
ReiserFS: hda9: journal params: device hda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda9: checking transaction log (hda9)
ReiserFS: hda9: Using r5 hash to sort names
ReiserFS: hda9: using 3.5.x disk format
ReiserFS: hda14: found reiserfs format "3.6" with standard journal
ReiserFS: hda14: using ordered data mode
ReiserFS: hda14: journal params: device hda14, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda14: checking transaction log (hda14)
ReiserFS: hda14: Using r5 hash to sort names
r8169: eth0: link down
r8169: eth0: link down
r8169: eth0: link down
ndiswrapper version 1.47 loaded (smp=yes)
usb 1-8: reset high speed USB device using ehci_hcd and address 5
ndiswrapper: driver rt2500usb (Linksys,10/17/2005, 2.01.00.0000) loaded
wlan0: ethernet device 00:12:17:81:b2:64 using NDIS driver: rt2500usb, version: 0x20000, NDIS version: 0x500, vendor: 'Linksys Wireless-G USB Network A', 13B1:000D.F.conf
wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
usbcore: registered new interface driver ndiswrapper
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 18
[fglrx] Internal AGP support requested, but kernel AGP support active.
[fglrx] Have to use kernel AGP support to avoid conflicts.
[fglrx] AGP detected, AgpState = 0x1f000a1b (hardware caps of chipset)
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[fglrx] AGP enabled, AgpCommand = 0x1f000312 (selected caps)
[fglrx] total GART = 134217728
[fglrx] free GART = 118222848
[fglrx] max single GART = 118222848
[fglrx] total LFB = 134217728
[fglrx] free LFB = 116387840
[fglrx] max single LFB = 116387840
[fglrx] total Inv = 134217728
[fglrx] free Inv = 134217728
[fglrx] max single Inv = 134217728
[fglrx] total TIM = 0
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
NTFS driver 2.1.28 [Flags: R/W MODULE].
NTFS-fs warning (device sda1): is_boot_sector_ntfs(): Invalid boot sector checksum.
NTFS-fs error (device sda1): read_ntfs_boot_sector(): Primary boot sector is invalid.
NTFS-fs error (device sda1): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
NTFS-fs error (device sda1): ntfs_fill_super(): Not an NTFS volume.
FAT: bogus number of reserved sectors
VFS: Can't find a valid FAT filesystem on dev sdc1.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
wlan0: no IPv6 routers present
hdc: tray open
end_request: I/O error, dev hdc, sector 64
Buffer I/O error on device hdc, logical block 16
Buffer I/O error on device hdc, logical block 17
hdc: tray open
end_request: I/O error, dev hdc, sector 64
Buffer I/O error on device hdc, logical block 16
Buffer I/O error on device hdc, logical block 17
hdd: irq timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: tray open
end_request: I/O error, dev hdc, sector 64
Buffer I/O error on device hdc, logical block 16
Buffer I/O error on device hdc, logical block 17
hdc: tray open
end_request: I/O error, dev hdc, sector 64
Buffer I/O error on device hdc, logical block 16
Buffer I/O error on device hdc, logical block 17
|
