i'm using "make xconfig" and when I in lilo start slack, slack don't want to start absolutily
( now I'm using old kernel loader in lilo )

This is my "xconfig" save file :


#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_ISA=y
# CONFIG_SBUS is not set
CONFIG_UID16=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y

#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_PGE=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_SMP is not set
# CONFIG_X86_UP_APIC is not set

#
# General setup
#
CONFIG_NET=y
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_NAMES=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_HOTPLUG is not set
# CONFIG_PCMCIA is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
# CONFIG_PM is not set
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play configuration
#
# CONFIG_PNP is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_FILTER=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_COMPAT_IPCHAINS=m
CONFIG_IP_NF_NAT_NEEDED=y
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
# CONFIG_IPV6 is not set
# CONFIG_KHTTPD is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set

#
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y

#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
# CONFIG_BLK_DEV_COMMERIAL is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=y

#
# IDE chipset support/bugfixes
#
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_AEC62XX=y
CONFIG_AEC62XX_TUNING=y
CONFIG_BLK_DEV_ALI15X3=y
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_CMD64X=y
#CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_PIIX_TUNING is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_PDC202XX=y
# CONFIG_PDC202XX_BURST is not set
# CONFIG_PDC202XX_FORCE is not set
CONFIG_BLK_DEV_SVWKS=y
CONFIG_BLK_DEV_SIS5513=y
CONFIG_BLK_DEV_SLC90E66=y
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_IDE_CHIPSETS=y

#
# Note: most of these also require special kernel boot parameters
#
CONFIG_BLK_DEV_4DRIVES=y
CONFIG_BLK_DEV_ALI14XX=y
CONFIG_BLK_DEV_DTC2278=y
CONFIG_BLK_DEV_HT6560B=y
CONFIG_BLK_DEV_PDC4030=y
CONFIG_BLK_DEV_QD65XX=y
CONFIG_BLK_DEV_UMC8672=y
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_DMA_NONPCI is not set
CONFIG_BLK_DEV_IDE_MODES=y
CONFIG_BLK_DEV_ATARAID=m
CONFIG_BLK_DEV_ATARAID_PDC=m
CONFIG_BLK_DEV_ATARAID_HPT=m

#
# SCSI support
#
# CONFIG_SCSI is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION_BOOT is not set
# CONFIG_FUSION_ISENSE is not set
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LAN is not set

#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
CONFIG_IEEE1394=m

#
# Device Drivers
#
CONFIG_IEEE1394_PCILYNX=m
# CONFIG_IEEE1394_PCILYNX_LOCALRAM is not set
# CONFIG_IEEE1394_PCILYNX_PORTS is not set
CONFIG_IEEE1394_OHCI1394=m

#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_RAWIO=m
# CONFIG_IEEE1394_VERBOSEDEBUG is not set

#
# I2O device support
#
CONFIG_I2O=m
CONFIG_I2O_PCI=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_LAN=m
CONFIG_I2O_PROC=m

#
# Network device support
#
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_ISA=m
CONFIG_ARCNET_COM20020_PCI=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_ETHERTAP=m

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=m
CONFIG_EL2=m
CONFIG_ELPLUS=m
CONFIG_EL16=m
CONFIG_EL3=m
CONFIG_3C515=m
CONFIG_VORTEX=m
CONFIG_LANCE=m
CONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=m
CONFIG_ULTRA=m
CONFIG_SMC9194=m
CONFIG_NET_VENDOR_RACAL=y
CONFIG_NI5010=m
CONFIG_NI52=m
CONFIG_NI65=m
CONFIG_AT1700=m
CONFIG_DEPCA=m
CONFIG_HP100=m
CONFIG_NET_ISA=y
CONFIG_E2100=m
CONFIG_EWRK3=m
CONFIG_EEXPRESS=m
CONFIG_EEXPRESS_PRO=m
CONFIG_HPLAN_PLUS=m
CONFIG_HPLAN=m
CONFIG_LP486E=m
CONFIG_ETH16I=m
CONFIG_NE2000=m
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_AC3200=m
CONFIG_APRICOT=m
CONFIG_CS89x0=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
CONFIG_DE4X5=m
CONFIG_DGRS=m
CONFIG_DM9102=m
CONFIG_EEPRO100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
# CONFIG_NATSEMI_CABLE_MAGIC is not set
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_NEW_RX_RESET is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_WINBOND_840=m
CONFIG_NET_POCKET=y
CONFIG_ATP=m
CONFIG_DE600=m
CONFIG_DE620=m

#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_SK98LIN=m
CONFIG_FDDI=y
CONFIG_DEFXX=m
CONFIG_SKFP=m
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
CONFIG_STRIP=m
CONFIG_WAVELAN=m
CONFIG_ARLAN=m
CONFIG_AIRONET4500=m
CONFIG_AIRONET4500_NONCS=m
CONFIG_AIRONET4500_PNP=y
CONFIG_AIRONET4500_PCI=y
# CONFIG_AIRONET4500_ISA is not set
# CONFIG_AIRONET4500_I365 is not set
CONFIG_AIRONET4500_PROC=m
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m

#
# Wireless Pcmcia cards support
#
# CONFIG_PCMCIA_HERMES is not set
# CONFIG_AIRO_CS is not set
CONFIG_NET_WIRELESS=y

#
# Token Ring devices
#
CONFIG_TR=y
CONFIG_IBMTR=m
CONFIG_IBMOL=m
CONFIG_IBMLS=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_TMSISA=m
CONFIG_ABYSS=m
CONFIG_SMCTR=m
CONFIG_NET_FC=y
CONFIG_RCPCI=m
CONFIG_SHAPER=m

#
# Wan interfaces
#
CONFIG_WAN=y
CONFIG_HOSTESS_SV11=m
CONFIG_COSA=m
# CONFIG_COMX is not set
CONFIG_DSCC4=m
CONFIG_FARSYNC=m
CONFIG_LANMEDIA=m
CONFIG_SEALEVEL_4021=m
CONFIG_SYNCLINK_SYNCPPP=m
CONFIG_HDLC=m
# CONFIG_HDLC_PPP is not set

#
# X.25/LAPB support is disabled
#
CONFIG_N2=m
CONFIG_C101=m
CONFIG_DLCI=m
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
CONFIG_SDLA=m
CONFIG_SBNI=m
# CONFIG_SBNI_MULTILINE is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
CONFIG_CD_NO_IDESCSI=y
# CONFIG_AZTCD is not set
# CONFIG_GSCD is not set
CONFIG_SBPCD=m
# CONFIG_MCD is not set
# CONFIG_MCDX is not set
# CONFIG_OPTCD is not set
# CONFIG_CM206 is not set
# CONFIG_SJCD is not set
# CONFIG_ISP16_CDI is not set
# CONFIG_CDU31A is not set
# CONFIG_CDU535 is not set

#
# Input core support
#
# CONFIG_INPUT is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
# CONFIG_SERIAL_CONSOLE is not set
CONFIG_SERIAL_EXTENDED=y
# CONFIG_SERIAL_MANY_PORTS is not set
CONFIG_SERIAL_SHARE_IRQ=y
# CONFIG_SERIAL_DETECT_IRQ is not set
CONFIG_SERIAL_MULTIPORT=y
CONFIG_HUB6=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_DIGIEPCA=m
CONFIG_ESPSERIAL=m
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_ISI=m
CONFIG_SYNCLINK=m
CONFIG_N_HDLC=m
CONFIG_RISCOM8=m
CONFIG_SPECIALIX=m
# CONFIG_SPECIALIX_RTSCTS is not set
CONFIG_SX=m
CONFIG_RIO=m
# CONFIG_RIO_OLDPCI is not set
CONFIG_STALDRV=y
CONFIG_STALLION=m
CONFIG_ISTALLION=m
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=512

#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ELV=m
CONFIG_I2C_VELLEMAN=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ELEKTOR=m
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_PROC=m

#
# Mice
#
CONFIG_BUSMOUSE=m
# CONFIG_ATIXL_BUSMOUSE is not set
CONFIG_LOGIBUSMOUSE=m
# CONFIG_MS_BUSMOUSE is not set
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
# CONFIG_82C710_MOUSE is not set
# CONFIG_PC110_PAD is not set

#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set

#
# Input core support is needed for gameports
#

#
# Input core support is needed for joysticks
#
CONFIG_QIC02_TAPE=m
# CONFIG_QIC02_DYNCONF is not set

#
# Edit configuration parameters in ./include/linux/tpqic02.h!
#

#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_SOFT_WATCHDOG=m
CONFIG_WDT=m
CONFIG_WDTPCI=m
CONFIG_WDT_501=y
CONFIG_WDT_501_FAN=y
CONFIG_PCWATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_I810_TCO=m
CONFIG_MIXCOMWD=m
CONFIG_60XX_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_INTEL_RNG=m
CONFIG_NVRAM=m
CONFIG_RTC=y
CONFIG_DTLK=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
CONFIG_SONYPI=m

#
# Ftape, the floppy tape device driver
#
CONFIG_FTAPE=m
CONFIG_ZFTAPE=m
CONFIG_ZFT_DFLT_BLK_SZ=10240

#
# The compressor will be built as a module only!
#
CONFIG_ZFT_COMPRESSOR=m
CONFIG_FT_NR_BUFFERS=3
# CONFIG_FT_PROC_FS is not set
CONFIG_FT_NORMAL_DEBUG=y
# CONFIG_FT_FULL_DEBUG is not set
# CONFIG_FT_NO_TRACE is not set
# CONFIG_FT_NO_TRACE_AT_ALL is not set

#
# Hardware configuration
#
CONFIG_FT_STD_FDC=y
# CONFIG_FT_MACH2 is not set
# CONFIG_FT_PROBE_FC10 is not set
# CONFIG_FT_ALT_FDC is not set
CONFIG_FT_FDC_THR=8
CONFIG_FT_FDC_MAX_RATE=2000
CONFIG_FT_ALPHA_CLOCK=0
CONFIG_AGP=m
CONFIG_AGP_INTEL=y
CONFIG_AGP_I810=y
CONFIG_AGP_VIA=y
# CONFIG_AGP_AMD is not set
CONFIG_AGP_SIS=y
CONFIG_AGP_ALI=y
CONFIG_AGP_SWORKS=y
CONFIG_DRM=y
# CONFIG_DRM_OLD is not set

#
# DRM 4.1 drivers
#
CONFIG_DRM_NEW=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_MWAVE is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#
CONFIG_VIDEO_PROC_FS=y

#
# Video Adapters
#
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_PMS=m
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_SAA5249=m
CONFIG_TUNER_3036=m
CONFIG_VIDEO_STRADIS=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZR36120=m
# CONFIG_VIDEO_MEYE is not set

#
# Radio Adapters
#
CONFIG_RADIO_CADET=m
CONFIG_RADIO_RTRACK=m
CONFIG_RADIO_RTRACK2=m
CONFIG_RADIO_AZTECH=m
CONFIG_RADIO_GEMTEK=m
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
CONFIG_RADIO_MIROPCM20=m
CONFIG_RADIO_MIROPCM20_RDS=m
CONFIG_RADIO_SF16FMI=m
CONFIG_RADIO_TERRATEC=m
CONFIG_RADIO_TRUST=m
CONFIG_RADIO_TYPHOON=m
CONFIG_RADIO_TYPHOON_PROC_FS=y
CONFIG_RADIO_ZOLTRIX=m

#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
CONFIG_EXT3_FS=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_UMSDOS_FS=y
CONFIG_VFAT_FS=y
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_TMPFS=y
CONFIG_RAMFS=m
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_MINIX_FS is not set
CONFIG_VXFS_FS=m
CONFIG_NTFS_FS=m
# CONFIG_NTFS_RW is not set
CONFIG_HPFS_FS=m
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_QNX4FS_FS=m
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
CONFIG_SYSV_FS=m
CONFIG_UDF_FS=m
# CONFIG_UDF_RW is not set
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y

#
# Network File Systems
#
CONFIG_CODA_FS=m
CONFIG_INTERMEZZO_FS=m
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SUNRPC is not set
# CONFIG_LOCKD is not set
# CONFIG_SMB_FS is not set
CONFIG_NCP_FS=m
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
CONFIG_NCPFS_STRONG=y
# CONFIG_NCPFS_NFS_NS is not set
CONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
CONFIG_ZISOFS_FS=y
CONFIG_ZLIB_FS_INFLATE=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_SMB_NLS is not set
CONFIG_NLS=y

#
# Native Language Support
#
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
CONFIG_NLS_CODEPAGE_855=y
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=y
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=y
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set

#
# Frame-buffer support
#
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FB_RIVA=y
# CONFIG_FB_CLGEN is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_VESA=y
CONFIG_FB_VGA16=y
CONFIG_FB_HGA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
CONFIG_FB_VIRTUAL=y
CONFIG_FBCON_ADVANCED=y
CONFIG_FBCON_MFB=y
CONFIG_FBCON_CFB2=y
CONFIG_FBCON_CFB4=y
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_CFB16=y
CONFIG_FBCON_CFB24=y
CONFIG_FBCON_CFB32=y
# CONFIG_FBCON_AFB is not set
# CONFIG_FBCON_ILBM is not set
# CONFIG_FBCON_IPLAN2P2 is not set
# CONFIG_FBCON_IPLAN2P4 is not set
# CONFIG_FBCON_IPLAN2P8 is not set
# CONFIG_FBCON_MAC is not set
# CONFIG_FBCON_VGA_PLANES is not set
CONFIG_FBCON_VGA=y
# CONFIG_FBCON_HGA is not set
# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
CONFIG_FBCON_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set

#
# Sound
#
CONFIG_SOUND=m
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
CONFIG_SOUND_ES1370=m
CONFIG_SOUND_ES1371=m
CONFIG_SOUND_ESSSOLO1=m
CONFIG_SOUND_MAESTRO=m
CONFIG_SOUND_MAESTRO3=m
CONFIG_SOUND_ICH=m
CONFIG_SOUND_RME96XX=m
CONFIG_SOUND_SONICVIBES=m
CONFIG_SOUND_TRIDENT=m
CONFIG_SOUND_MSNDCLAS=m
# CONFIG_MSNDCLAS_HAVE_BOOT is not set
CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin"
CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin"
CONFIG_SOUND_MSNDPIN=m
# CONFIG_MSNDPIN_HAVE_BOOT is not set
CONFIG_MSNDPIN_INIT_FILE="/etc/sound/pndspini.bin"
CONFIG_MSNDPIN_PERM_FILE="/etc/sound/pndsperm.bin"
CONFIG_SOUND_VIA82CXXX=m
# CONFIG_MIDI_VIA82CXXX is not set
CONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set
CONFIG_SOUND_AD1816=m
CONFIG_SOUND_SGALAXY=m
CONFIG_SOUND_ADLIB=m
CONFIG_SOUND_ACI_MIXER=m
CONFIG_SOUND_CS4232=m
CONFIG_SOUND_SSCAPE=m
CONFIG_SOUND_GUS=m
# CONFIG_SOUND_GUS16 is not set
# CONFIG_SOUND_GUSMAX is not set
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MSS=m
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_NM256=m
CONFIG_SOUND_MAD16=m
# CONFIG_MAD16_OLDCARD is not set
CONFIG_SOUND_PAS=m
CONFIG_SOUND_PSS=m
# CONFIG_PSS_MIXER is not set
# CONFIG_PSS_HAVE_BOOT is not set
CONFIG_SOUND_SB=m
CONFIG_SOUND_AWE32_SYNTH=m
CONFIG_SOUND_WAVEFRONT=m
CONFIG_SOUND_MAUI=m
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_OPL3SA1=m
CONFIG_SOUND_OPL3SA2=m
CONFIG_SOUND_YMFPCI=m
# CONFIG_SOUND_YMFPCI_LEGACY is not set
CONFIG_SOUND_UART6850=m
CONFIG_SOUND_AEDSP16=m
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0
CONFIG_AEDSP16_SBPRO=y
CONFIG_AEDSP16_MPU401=y
CONFIG_SOUND_TVMIXER=m

#
# USB support
#
# CONFIG_USB is not set

#
# USB Controllers
#

#
# USB Device Class drivers
#

#
# SCSI support is needed for USB Storage
#

#
# USB Human Interface Devices (HID)
#

#
# Input core support is needed for USB HID
#

#
# USB Imaging devices
#

#
# USB Multimedia devices
#

#
#
# USB Imaging devices
#

#
# USB Multimedia devices
#

#
# USB Network adaptors
#

#
# USB port drivers
#

#
# USB Serial Converter support
#

#
# USB Miscellaneous drivers
#

#
# Bluetooth support
#
CONFIG_BLUEZ=m
CONFIG_BLUEZ_L2CAP=m

#
# Bluetooth device drivers
#
CONFIG_BLUEZ_HCIUART=m
CONFIG_BLUEZ_HCIVHCI=m

#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set

Your kernel config is useless to us at this point as it only shows what you compiled, we wouldn't know what is wrong by that.

What error do you get when your trying to boot to your new kernel? That would be more helpful to us.

I post this that you could copy it to file in /usr/src/linux-2.4.18/ and open that file with xconfig. Than you can see, maybe something was wrong.

You now think "Whi hi write about xconfig". I write about xconfig because when i click slack in lilo, absolutelly !!! nothing is
(i click slack in lilo ---> loading Slackware... and system halt, i push reboot button)

ok... after you ran "make xconfig", you went ahead and built the kernel, right? are there 2 files in / called "vmlinuz" and "System.map"?

yes,

-rw------- 1 root root 445653 Feb 28 19:55 System.map
-rwx------ 1 root root 2351069 Feb 28 19:55 vmlinux

and what ?

ok that's good. I don't know why "make install" always puts them there, but I always move them into /boot. it just seems better to me; some people have to do that, as well as have a separate /boot partition at the beginning so the kernel image is below 1024 cylinders on the drive. otherwise it's invisible to the bootloader or something... a BIOS issue. that might be a problem, and it might not. I never had trouble loading kernels above 50GB on the disk, but I never had a BIOS more than 2 or 3 years old.

you might try first to just edit /etc/lilo.conf, making sure that it points Slackware to "image = /vmlinuz", and run /sbin/lilo. that ought to do it for you... unless /etc/lilo.conf already has "image = /vmlinuz", then come back and we'll puzzle some more.

i also notice it is called "vmlinux" by your listing, i don't see that-- ever. that's why i wrote vmlinuz instead. if that's what it's called, with the x, make sure it matches ( image = /vmlinux) -- you get the idea

The Makefile, on line 72 has the following commented...
export INSTALL_PATH=/boot

This is for Slack 8.0 and earlier. This needs to be uncommented for make install to work properly for 8.1 and current. Otherwise you have to put System.map and vmlinuz in /boot manually, as xcon stated.

make install will take care of this also...

This is in my experience, the absolute best procedure for compiling a kernel in Slack...and I believe it's from one of the Moderators here

http://www.p-two.net/modules.php?op=...=article&sid=5

that totally explains it... i always do everything since my first kernel exactly like it spelled out, except for editing the makefile. thanks for the tip

I never use make install. I just make

make mrproper && make xconfig
make dep && make bzImage && make modules
then renaming the current /lib/modules/foo to foo.old
make modules_install

Editing the System.map and vmlinuz to .old
Copy the new kernel and System.map to /boot
Edit lilo
run lilo
reboot.

make install does all of this...
Not that there is anything wrong with what you do...I was just ponting out that there was a very easy method to accomplish these things with one command.

I uncommented as DaOne said and now my new kernel starts and work well, but i have two small problems. Please, help me !
1. When i start loading slack, my resolution is 640x480 I know, i should turn on my frame-buffer. And i have turned it on in xconfig. There are so many options... I have GeForce 2 mx 400. Can you tell me which options i should turn on and which i should turn off ? Or maybe you can tell me another way ?
2.my mplayer NOW, with new kernel don't want to start
mplayer -vo xv

-------------------------------------------------------------------------
MPlayer 0.90pre8-2.95.3 (C) 2000-2002 Arpad Gereoffy (see DOCS)

CPU: Intel Celeron 2/Pentium III Coppermine,Geyserville (Family: 6, Stepping: 6)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 SSE

Reading /root/.mplayer/codecs.conf: 38 audio & 106 video codecs
Font /root/.mplayer/font/font.desc loaded successfully! (0 chars)
Using Linux hardware RTC timing (1024Hz)
Input config file /root/.mplayer/input.conf parsed : 0 binds

Playing Blink 182 - All The Small Things.mpeg
Detected MPEG-PS file format!
VIDEO: MPEG1 352x240 (aspect 12) 29.97 fps 1440.0 kbps (180.0 kbyte/s)
==========================================================================
Detected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 44100 Hz, 2 ch, sfmt: 0x10 (2 bps), ratio: 28000->176400 (224.0 kbit)
vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0" => local display)
==========================================================================
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 352 x 240 (preferred csp: Mpeg PES)
Couldn't find matching colorspace - retrying with -vop scale...
Opening video filter: [scale]
Sorry, selected video_out device is incompatible with this codec.
VDecoder init failed
Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder v2.0
libmpeg2: Using MMXEXT for IDCT transform
libmpeg2: Using MMXEXT for motion compensation
VDec: vo config request - 352 x 240 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
VO: [xv] 352x240 => 352x264 Planar YV12
X11 error: BadAccess (attempt to access private resource denied)


MPlayer interrupted by signal 6 in module: init_video_codec
- MPlayer crashed. This shouldn't happen. It can be a bug in the MPlayer code _or_ in your drivers _or_ in your gcc version. If you think it's MPlayer's fault, please read DOCS/bugreports.html and follow instructions there. We can't and won't help unless you provide these informations when reporting a possible bug.
------------------------------------------------------------------------

How big is YOUR kernel ?
My new kernel - 849559
My old kernel - 1061033
I know, my new kernel is too big
But I did my first step
And I will try to make my kernel smaller than my friend have. His kernel is about 400 kb.

if u had Mplayer before, then i believe you have to get rid if the entire folder, then extract it again and reinstall mplayer without removing it first, and the resolution stuff, if u have kde3.1 then go to the kcontrol and edit your monitor, if u don't, it is in /etc/X11/XF86Config/ edit the monitor section

Henry, you don't understand me. I mean "make xconfig" and not "XF86Config". My low resolution is in console. X now is working normal.

After reinstalling Mplayer still don't want to play video clips. Otherwise mp3 mplayer play good.

for the video driver-- are you using NVIDIA binaries? I am, they seem to want to be recompiled every time a kernel changes. also don't include "riva" specific framebuffer support in the kernel video options, it'll screw things up when you switch from video to text: 2 drivers, one device, not good. i thought the fb mode was cool with the penguin until i tried to blink back to vt1 from the gui, instant hang...

for higher console resolution, uncomment the appropriate line in /etc/lilo.conf and run /sbin/lilo again. try "vga=ask" and it'll prompt you before loading the kernel, what resolution to use.