kernel 2.6.8.1....
Hi all,
After compiling my slack10 to kernel 2.6.8.1 I have a problem with console. I can't boot at 1024x768x256 and the little penguin at top has disappeared. I re-install lilo with no results. Here is my .config file # # Graphics support # CONFIG_FB=y CONFIG_FB_VESA=y # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y In addition I have installed write access to my NTFS partition but the partition remains read only. Any idea? Thanks in advance... |
From http://www.linuxquestions.org/questi...461#post660461
Code:
# Graphics support |
Thanks for your quick response....
Solution is to line: CONFIG_VIDEO_SELECT=y After recompiling with this option console is perfect. |
Now I faced up another problem... I can't write with my cd-recorder...could someone tell me the configuration of 2.6.8.1 kernel in order to have cd recording capabilities? I think that scsi-emulator is not neseccary.
X-CD-Roast can't find any cd recorder... With previous kernel X-CD-Roast worked fine. |
This is a very common problem in 2.6.8.1, there is a fix floating somewhere out there I believe, but I have not come across it. Until 2.6.9 Im sticking with 2.4.27 for cdwriting purposes.
|
If you have an IDE CD burner then you will have to put ATAPI: infront of the device node number for your cdrw when you go to use it. They no longer use scsi emulation to enable cdburning.
|
Quote:
Can you explain me how to do this? Thanks. |
I have always used the command line cdrecord program.
If you type "cdrecord -scanbus dev=ATAPI" you should get a list like this: Code:
scsibus0: |
Something goes wrong on my computer...
root@nslaptop:~# cdrecord -scanbus dev=ATAPI Cdrecord 2.00.3 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J�g Schilling scsidev: 'ATAPI' devname: 'ATAPI' scsibus: -2 target: -2 lun: -2 Warning: Using ATA Packet interface. Warning: The related libscg interface code is in pre alpha. Warning: There may be fatal problems. cdrecord: No such file or directory. Cannot open SCSI driver. cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root. cdrecord: For possible transport specifiers try 'cdrecord dev=help'. Any idea? I have compile kernel with scsi-emulator. Is this a problem? |
Are you assigning your IDE cdrom as a scsi emulated device?
|
No I don't.
dmesg output is: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: TOSHIBA DVD-ROM SD-R2412, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 78140160 sectors (40007 MB) w/1740KiB Cache, CHS=16383/255/63, UDMA(100) hda: hda1 hda2 hda3 hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 PCI: Enabling device 0000:01:0b.0 (0000 -> 0002) My drive is a combo DVD CD-RW drive. :( :( :( :( |
revert to 2.6.7 kernel as I did, cd burning will work automagically as before
http://www.kernel.org/pub/linux/kernel/v2.6/ |
All times are GMT -5. The time now is 02:09 PM. |