LinuxQuestions.org
Visit Jeremy's Blog.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware
User Name
Password
Slackware This Forum is for the discussion of Slackware Linux.

Notices


Reply
  Search this Thread
Old 08-14-2010, 06:21 PM   #1
stf92
Senior Member
 
Registered: Apr 2007
Location: Buenos Aires.
Distribution: Slackware
Posts: 4,442

Rep: Reputation: 76
gmplayer outputs only audio when playing a movie.


kernel 2.6.21.5, GNU (slackware 12.0).
KDE 3.5.7.
MPlayer 1.0rc2-4.1.2.

Hi:
I have a .avi file on the hard (really on a cd-rom, but it's just the same). Being in the GUI (KDE), I do Main Menu>Run Command and then, in the dialog box, I enter 'gmplayer foo.avi'. Gmplayer starts, the picture of a small console is seen on the screen, and the audio from the movie is heard. Just as if I had inserted the CD into a stand alone dvd player but I could not see the image.

I compiled and installed mplayer (with GUI support) from the slackbuilds.org sources and script for slackware 12.0, which is the slack version installed in my machine. If I open a terminal (in the GUI) and run gmplayer there I get this:
Code:
 VIDEOOUT: [VO_XV] It seems there is no Xvideo support for your video card available.
[VO_XV] Run 'xvinfo' to verify its Xv support and read
[VO_XV] DOCS/HTML/en/video.html#xv!
[VO_XV] See 'mplayer -vo help' for other (non-xv) video out drivers.
[VO_XV] Try -vo x11.
  CPLAYER: Error opening/initializing the selected video_out (-vo) device.
  CPLAYER: ==========================================================================
I know I could do what is suggested by gmplayer but, before that, perhaps I am simply invoking gmplayer in the wrong way. That is: there are at least to ways: using the Run Command dialog box and opening a terminal and running as a cli command. Any suggestion would be welcome. Regards.
 
Old 08-14-2010, 07:25 PM   #2
adamk75
Senior Member
 
Registered: May 2006
Posts: 3,091

Rep: Reputation: 399Reputation: 399Reputation: 399Reputation: 399
You will either need to tell gmplayer/mplayer to use another output device as the message says, or you need to install a video driver that supports Xv. Most, though not all, video cards support Xv. What GPU are you using?

Adam
 
Old 08-15-2010, 08:43 AM   #3
stf92
Senior Member
 
Registered: Apr 2007
Location: Buenos Aires.
Distribution: Slackware
Posts: 4,442

Original Poster
Rep: Reputation: 76
Thank you for your reply. It's a SiS 630 with 16MB RAM.
 
Old 08-15-2010, 10:11 AM   #4
adamk75
Senior Member
 
Registered: May 2006
Posts: 3,091

Rep: Reputation: 399Reputation: 399Reputation: 399Reputation: 399
That GPU may just not support Xv. Please attach or pastebin your /var/log/Xorg.0.log file.

Adam
 
Old 08-15-2010, 10:18 AM   #5
stf92
Senior Member
 
Registered: Apr 2007
Location: Buenos Aires.
Distribution: Slackware
Posts: 4,442

Original Poster
Rep: Reputation: 76
Thanks. I'm attaching it.
Attached Files
File Type: log Xorg.0.log (51.2 KB, 15 views)
 
Old 08-15-2010, 12:34 PM   #6
adamk75
Senior Member
 
Registered: May 2006
Posts: 3,091

Rep: Reputation: 399Reputation: 399Reputation: 399Reputation: 399
You are currently using the vesa driver. I do not know if Slackware 12.0 comes with the sis driver for Xorg, but Slackware 13.1 definitely does. You can check to see if you have the sis driver and, if so, modify your /etc/X11/xorg.conf file so that it uses that driver instead of the vesa driver.

Adam
 
Old 08-15-2010, 01:03 PM   #7
stf92
Senior Member
 
Registered: Apr 2007
Location: Buenos Aires.
Distribution: Slackware
Posts: 4,442

Original Poster
Rep: Reputation: 76
Thanks. If this is not to ask too much, I made 'locate -i sis630' and I found:
Code:
/lib/modules/2.6.21.5/kernel/drivers/i2c/busses/i2c-sis630.ko
/lib/modules/2.6.21.5-smp/kernel/drivers/i2c/busses/i2c-sis630.ko
/usr/src/linux-2.6.21.5/Documentation/i2c/busses/i2c-sis630
/usr/src/linux-2.6.21.5/drivers/i2c/busses/i2c-sis630.c
/usr/src/linux-2.6.21.5/include/config/i2c/sis630.h
root@darkstar:~/juan#
Also, I found in my hard disk a file xsys.tgz. I send you the README file from that tarball. Thanks again.
Attached Files
File Type: txt README.TXT (5.9 KB, 12 views)

Last edited by stf92; 08-15-2010 at 01:05 PM.
 
Old 08-15-2010, 01:07 PM   #8
adamk75
Senior Member
 
Registered: May 2006
Posts: 3,091

Rep: Reputation: 399Reputation: 399Reputation: 399Reputation: 399
The Xorg sis driver is called sys_drv.so. That's what you want to search for.

Adam
 
Old 08-15-2010, 02:15 PM   #9
stf92
Senior Member
 
Registered: Apr 2007
Location: Buenos Aires.
Distribution: Slackware
Posts: 4,442

Original Poster
Rep: Reputation: 76
Thanks. I found
/usr/lib/xorg/modules/drivers/sis_drv.la
/usr/lib/xorg/modules/drivers/sis_drv.so

On the other hand, in /etc/X11/, I have three files:
xorg.conf
xorg.conf-fbdev
xorg.conf-vesa

xorg.conf-vesa has been copied onto xorg.conf, because they are identical. -vesa is supposed to be an improved version of -fbdev. Just in case you were so kind as to see it a little, I include xorg.conf, given that I don't see very well where exactly I can substitute the sis driver for the vesa driver. Regards.

Code:
root@darkstar:/etc/X11# cat xorg.conf
# File generated by xf86config.

#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

# NOTE:  This is a NEW IMPROVED version of XF86Config-fbdev that uses the vesa
# driver instead of the fbdev driver.  Thanks to Kenneth Fanyo who pointed
# this out to me. :)

# This XF86Config file is designed for use with the VESA framebuffer.
# This generic interface should work with nearly all video cards
# (although not every card will support every resolution).

# With the new driver, it should no longer be required to have frame buffer
# support in the kernel, or to run it on the console.
#
# Enjoy! :)
# -- volkerdi@slackware.com
#

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"   # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the font modules
    Load        "type1"
    Load        "freetype"
    #Load        "speedo"

# This loads the GLX module
    Load       "glx"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath     "/usr/share/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#

    FontPath   "/usr/share/fonts/local/"
    FontPath   "/usr/share/fonts/misc/"
    FontPath   "/usr/share/fonts/OTF/"
    FontPath   "/usr/share/fonts/TTF/"
    FontPath   "/usr/share/fonts/Type1/"
    FontPath   "/usr/share/fonts/CID/"
    FontPath   "/usr/share/fonts/Speedo/"
    FontPath   "/usr/share/fonts/75dpi/:unscaled"
    FontPath   "/usr/share/fonts/100dpi/:unscaled"
    FontPath   "/usr/share/fonts/75dpi/"
    FontPath   "/usr/share/fonts/100dpi/"
    FontPath   "/usr/share/fonts/cyrillic/"

# ModulePath can be used to set a search path for the X server modules.
# The default path is shown here.

#    ModulePath "/usr/lib/xorg/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option     "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option     "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option     "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option     "DontZoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option     "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option     "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option     "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option     "AllowNonLocalModInDev"

# Set the basic blanking screen saver timeout.

#    Option      "blank time"    "10"    # 10 minutes

# Set the DPMS timeouts.  These are set here because they are global
# rather than screen-specific.  These settings alone don't enable DPMS.
# It is enabled per-screen (or per-monitor), and even then only when
# the driver supports it.

#    Option      "standby time"  "20"
#    Option      "suspend time"  "30"
#    Option      "off time"      "60"

# On some platform the server needs to estimate the sizes of PCI
# memory and pio ranges. This is done by assuming that PCI ranges
# don't overlap. Some broken BIOSes tend to set ranges of inactive
# devices wrong. Here one can adjust how aggressive the assumptions
# should be. Default is 0.

# Option   "EstimateSizesAggresively" "0"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier  "Keyboard1"
    Driver      "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option     "Protocol"      "Xqueue"

# Set the keyboard auto repeat parameters.  Not all platforms implement
# this.

#    Option     "AutoRepeat"    "500 5"

# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).

#    Option     "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.

#    Option     "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a European
# keyboard, you will probably want to use one of:
#
#    Option     "XkbModel"      "pc102"
#    Option     "XkbModel"      "pc105"
#
# If you have a Microsoft Natural keyboard, you can use:
#
#    Option     "XkbModel"      "microsoft"
#
# If you have a US "windows" keyboard you will want:
#
#    Option     "XkbModel"      "pc104"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#
#    Option     "XkbLayout"     "de"
#
# or:
#
#    Option     "XkbLayout"     "de"
#    Option     "XkbVariant"    "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#
#    Option     "XkbOptions"    "ctrl:swapcaps"


# These are the default XKB settings for X.Org
#
#    Option     "XkbRules"      "xorg"
#    Option     "XkbModel"      "pc105"
#    Option     "XkbLayout"     "us"
#    Option     "XkbVariant"    ""
#    Option     "XkbOptions"    ""

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier  "Mouse1"
    Driver      "mouse"

# On platforms where PnP mouse detection is supported the following
# protocol setting can be used when using a newer PnP mouse:

#    Option     "Protocol"      "Auto"

# The available mouse protocols types that you can set below are:
#    Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
#    Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
#    MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
#    ThinkingMouse ThinkingMousePS/2 Xqueue
    Option "Protocol"    "PS/2"

# The mouse device.  The device is normally set to /dev/mouse,
# which is usually a symbolic link to the real device.

    Option "Device"      "/dev/mouse"
#   Option "Device"      "/dev/psaux"
#   Option "Device"      "/dev/ttyS0"
#   Option "Device"      "/dev/ttyS1"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"  "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"          "9600"
#    Option "SampleRate"        "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection

# Some examples of extended input devices

# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "My Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   31.5 - 50.0

#    HorizSync  30-64         # multisync
#    HorizSync  31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync  15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 40-90

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

Section "Device"
    Identifier  "VESA Framebuffer"
    Driver      "vesa"
    #VideoRam    4096
    # Insert Clocks lines here if appropriate
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen 1"
    Device      "VESA Framebuffer"
    Monitor     "My Monitor"

# If your card can handle it, a higher default color depth (like 24 or 32)
# is highly recommended.

#   DefaultDepth 8
#   DefaultDepth 16
   DefaultDepth 24
#   DefaultDepth 32

# "1024x768" is also a conservative usable default resolution.  If you
# have a better monitor, feel free to try resolutions such as
# "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your
# card/monitor can produce)

####        Modes en el archivo original: "640x480" "1024x768" "800x600"
# Ultima configuracion en vigor:
#   "800x600" como 1er campo de lineas Modes (el unico al que KDE
#   o quien sea que sea parece dar bola).
#           "1024x768" era el 1er campo en los 4 Modes!
    Subsection "Display"
        Depth       8
        Modes "640x480" "1024x768" "800x600"
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes "640x480" "1024x768" "800x600"
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes "800x600" "1024x768" "800x600"
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes "640x480" "1024x768" "800x600"
    EndSubsection

EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

root@darkstar:/etc/X11#
 
Old 08-15-2010, 05:24 PM   #10
adamk75
Senior Member
 
Registered: May 2006
Posts: 3,091

Rep: Reputation: 399Reputation: 399Reputation: 399Reputation: 399
Change:

Code:
Section "Device"
    Identifier  "VESA Framebuffer"
    Driver      "vesa"
    #VideoRam    4096
    # Insert Clocks lines here if appropriate
EndSection
To:

Code:
Section "Device"
    Identifier  "VESA Framebuffer"
    Driver      "sis"
    #VideoRam    4096
    # Insert Clocks lines here if appropriate
EndSection
 
1 members found this post helpful.
Old 08-15-2010, 05:31 PM   #11
stf92
Senior Member
 
Registered: Apr 2007
Location: Buenos Aires.
Distribution: Slackware
Posts: 4,442

Original Poster
Rep: Reputation: 76
Thank you very much. I'll try it and will let you know.
 
Old 08-15-2010, 07:12 PM   #12
stf92
Senior Member
 
Registered: Apr 2007
Location: Buenos Aires.
Distribution: Slackware
Posts: 4,442

Original Poster
Rep: Reputation: 76
It's wonderful. I can't believe it! I don't know how to thank you. Maybe someday I will be able to solve these problems by myself. All the best wishes.
 
  


Reply

Tags
mplayer


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
XMMS GMPLAYER freeze when playing sound RRolleston Debian 1 01-08-2005 03:38 AM
Mplayer and Xine create only green outputs on playing video files sn_piranha Linux - Software 5 10-10-2004 09:36 PM
GMplayer sound and movie doesn't match southpole.dk Linux - Software 1 04-12-2004 03:57 PM
Gmplayer Not Playing Nice With Fluxbox 0.9.7 Crashed_Again Linux - Software 3 01-13-2004 01:50 PM
can watch movie using gmplayer in root, but not as a user!? sirpelidor Linux - Software 6 01-07-2004 04:04 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware

All times are GMT -5. The time now is 06:28 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration