Hi, I just installed slack 9.1 and compiled my kernel. Everything went smooth but I get a "cant load module" with pcmcia card services when I boot and I got the same "cant load module" message before I compiled the kernel.

Starting PCMCIA services:
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
<Probing for PCIC: edit /etc/rc.d/rc.pcmcia>
PCI: found IRQ 11 for device 00:02.0
PCI: Sharing IRQ 11 with 00:06.0
PCI: Sharing IRQ 11 with 01:00.0
PCI: Sharing IRQ 11 for device 00:02.1
Yenta IRQ list 0698, PCI irq11
Socket status: 30000006
Yenta IRQ list 0698, PCI irq11
Socket status: 30000010
cs: socket c7a75800 timed out during reset. Try increasing setup_delay.
cardmgr[59]: watching 2 sockets
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x130-0x137 0x200-0x207 0x220-0x22f 0x388-0x38f 0x3b8-0x3df 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cardmgr[60]: starting, version is 3.2.5
cd: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
cd: memory probe 0x60000000-0x60ffffff: clean.
cardmgr [60]: socket 1: Anonymous memory
cardmgr [60]: executing: 'modprobe memory_cs'
cardmgr [60]: + modprobe: Cant locate module memory_cs
cardmgr [60]: modprobe exited with status 255
cardmgr [60]: module /lib/modules/2.4.22/pcmcia/memory_cs.o not availabe
cardmgr [60]: get dev info on socket 1 failed: Resource temporarily unavailable.

Can anyone tell me whats causing these problems when I boot?
Thanks.