I just upgraded my video card, actually my entire mobo, but I think the video card is to blame for this. Lilo is set to use a framebuffer at 1024x768 but for some reason it goes to 640x480. I upgraded my kernel and it is now at 2.6.7. My hardware is
Radeon 7000
Soyo mobo with support for 1.5 volt AGP cards
AMD Athlon 2600

-Thanks in advance.

It would probably help if you:

1) posted the contents of /etc/lilo.conf;
2) told us what video card you used to have, what card you have now, and what drivers it is using;
3) told us what kernel you were using before you upgraded.

# LILO configuration file
# generated by 'liloconfig'
#
# Start LILO global section
boot = /dev/hda
lba32
initrd=/boot/initrd.splash
#compact
# faster, but won't work on all systems.
prompt
bitmap = /logo64.bmp
timeout = 30
# VESA framebuffer console @ 1024x768x256
vga = 791
# Normal VGA console
# vga = normal
# VESA framebuffer console @ 1024x768x64k
# vga=791
# VESA framebuffer console @ 1024x768x32k
# vga=790
# VESA framebuffer console @ 1024x768x256
# vga=773
# VESA framebuffer console @ 800x600x64k
# vga=788
# VESA framebuffer console @ 800x600x32k
# vga=787
# VESA framebuffer console @ 800x600x256
# vga=771
# VESA framebuffer console @ 640x480x64k
# vga=785
# VESA framebuffer console @ 640x480x32k
# vga=784
# VESA framebuffer console @ 640x480x256
# vga=769
# ramdisk = 0
# paranoia setting
# End LILO global section
# Linux bootable partition config begins
image = /boot/vmlinuz
password = ******
root = /dev/hda1
label = Linux
read-only
# Non-UMSDOS filesystems should be mounted read-only for checking
# Linux bootable partition config ends

Used to have an Nvidia Riva, now using a Radeon 7000 using the drivers in the kernel.
old kernel was 2.6.5.