Quote:
Originally Posted by Daedra
Are you trying to make your fonts look like this screenshot http://www.formz.com/forum2/messages/16/7281.jpg? The fonts are rendered with the bytecode interpreter enabled and no anti aliasing which IMO looks best on CRT's. Traditional sub-pixel rendering is only available to LCD's or CRT's with a trinitron tube like sony made so unless you have a trintron tube CRT you cant use my patches.
|
I 'm googling yet. There is a kdm auto-login. What's the correct
startx -??dpi command for this resolution?
My output xdpyinfo and var/log/Xorg.0.log part:
$ xdpyinfo | grep -B1 dot
dimensions: 1024x768 pixels (313x232 millimeters)
resolution: 83x84 dots per inch
/var/log/Xorg.0.log
...
[ 37.369] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 37.369] (==) NVIDIA(0): RGB weight 888
[ 37.369] (==) NVIDIA(0): Default visual is TrueColor
[ 37.369] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 37.369] (**) NVIDIA(0): Option "DynamicTwinView" "FALSE"
[ 39.045] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 39.045] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 39.051] (II) NVIDIA(0): NVIDIA GPU GeForce 6600 GT (NV43) at PCI:1:0:0 (GPU-0)
[ 39.051] (--) NVIDIA(0): Memory: 131072 kBytes
[ 39.051] (--) NVIDIA(0): VideoBIOS: 05.43.02.57.10
[ 39.051] (II) NVIDIA(0): Detected AGP rate: 8X
[ 39.051] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 39.051] (--) NVIDIA(0): Connected display device(s) on GeForce 6600 GT at PCI:1:0:0
[ 39.051] (--) NVIDIA(0): Samsung SyncMaster (CRT-1)
[ 39.051] (--) NVIDIA(0): Samsung SyncMaster (CRT-1): 400.0 MHz maximum pixel clock
[ 39.051] (II) NVIDIA(0): Assigned Display Device: CRT-1
[ 39.051] (==) NVIDIA(0):
[ 39.051] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 39.051] (==) NVIDIA(0): will be used as the requested mode.
[ 39.051] (==) NVIDIA(0):
[ 39.051] (II) NVIDIA(0): Validated modes:
[ 39.051] (II) NVIDIA(0): "nvidia-auto-select"
[ 39.051] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[ 39.053] (--)
NVIDIA(0): DPI set to (83, 84); computed from "UseEdidDpi" X config
[ 39.053] (--) NVIDIA(0): option
[ 39.053] (--) Depth 24 pixmap format is 32 bpp
[ 39.058] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 39.200] (II) Loading extension NV-GLX
[ 39.272] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 39.272] (==) NVIDIA(0): Backing store disabled
[ 39.272] (==) NVIDIA(0): Silken mouse enabled
[ 39.274] (**) NVIDIA(0): DPMS enabled
[ 39.274] (II) Loading extension NV-CONTROL
[ 39.274] (II) Loading extension XINERAMA
[ 39.274] (II) Loading sub module "dri2"
[ 39.274] (II) LoadModule: "dri2"
[ 39.274] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
...
I re-edited xorg.conf and is it enough to have a correct monitor representation and improve fonts? In case of not, what can I copy in 13.1 system to have that same fonts appearances?
Options used:
Option "UseEdidFreqs" "FALSE"
DisplaySize 313 232
Option "UseEdidDpi" "FALSE"
Option "Dpi" "83 x 84"