hi,

i am trying to set up a computer with an AMD Radeon Pro WX 2100 card:

https://pro.radeon.com/en/product/wx...n-pro-wx-2100/

I installed Slackware64 14.2, set up ELILO and upgraded the kernel to 4.14.13, by taking the source and .config file from -current. Upon boot, the boot process freezes with the following message:

fb: switching to amdgpudrmfb from efi vga

any ideas?

UPDATE: I updated the system with slackpkg upgrade-all (firmware was upgraded, too) and now this problem is gone. X, however cannot start.

This is the error message:

[ 29.089] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 29.089] (II) VESA: driver for VESA chipsets: vesa
[ 29.089] (--) using VT number 7

[ 29.104] (II) modeset(0): using drv /dev/dri/card0
[ 29.104] (WW) Falling back to old probe method for vesa
[ 29.104] (EE)
[ 29.104] (EE) Backtrace:
[ 29.104] (EE) 0: /usr/libexec/Xorg (xorg_backtrace+0x41) [0x580701]
[ 29.104] (EE) 1: /usr/libexec/Xorg (0x400000+0x184629) [0x584629]
[ 29.104] (EE) 2: /lib64/libpthread.so.0 (0x7fbec1087000+0x113b0) [0x7fbec10983b0]
[ 29.104] (EE) 3: /usr/lib64/libpciaccess.so.0 (pci_device_next+0x110) [0x7fbec1f4ac30]
[ 29.104] (EE) 4: /usr/lib64/libpciaccess.so.0 (pci_device_find_by_slot+0x2b) [0x7fbec1f4acbb]
[ 29.104] (EE) 5: /usr/lib64/libpciaccess.so.0 (pci_device_vgaarb_init+0x9f) [0x7fbec1f4c74f]
[ 29.104] (EE) 6: /usr/libexec/Xorg (0x400000+0x8f829) [0x48f829]
[ 29.104] (EE) 7: /usr/libexec/Xorg (xf86BusConfig+0x62) [0x469a92]
[ 29.104] (EE) 8: /usr/libexec/Xorg (InitOutput+0x9c3) [0x4775c3]
[ 29.104] (EE) 9: /usr/libexec/Xorg (0x400000+0x38a54) [0x438a54]
[ 29.104] (EE) 10: /lib64/libc.so.6 (__libc_start_main+0xf0) [0x7fbebf6cd7d0]
[ 29.104] (EE) 11: /usr/libexec/Xorg (_start+0x29) [0x4242a9]
[ 29.104] (EE)
[ 29.104] (EE) Segmentation fault at address 0x0
[ 29.104] (EE)
Fatal server error:
[ 29.104] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 29.104] (EE)
[ 29.104] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 29.104] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 29.105] (EE)
[ 29.122] (EE) Server terminated with error (1). Closing log file.

I tried AlienBob's liveslack for current and everything seems to just work. So, as a last resort, I can switch to -current... not my primary choice for a workstation, but still...

I would probably give 4.15 a try. Right now it is still in RC status, but it is close to being finalized. They had MAJOR additions to amdgpu display code, and hopefully it can solve some (or all) of your issues.

Also, as an FYI, it would've probably been better for you to post your "update" as a reply. I didn't realize you had updated it after I read it the first time.

1 members found this post helpful.

you are right, about the 'update'. The whole post is a bit of a mess. Sorry...

I installed -current and the video card is supported. I have not investigated performance yet, but I can try the 4.15 kernel and report here.