LinuxQuestions.org
Latest LQ Deal: Latest LQ Deals
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware
User Name
Password
Slackware This Forum is for the discussion of Slackware Linux.

Notices


Reply
  Search this Thread
Old 12-03-2006, 06:46 AM   #1
shenberry
Member
 
Registered: Nov 2006
Location: New Orleans, LA
Distribution: Slackware 11
Posts: 42

Rep: Reputation: 15
either modem or PCI card


I have no idea which one I should focus on at this point let me just start at the beginning.
The intel RJ-45 connector on my motherboard doesn't work the HP n1207d in the PCI does, Linux see both of them and I don't know which one it is trying to you, I am only speculating by the print out it gives me with certain command.
I know it see both controllers since i used the lspci command after figuring out why i can never get online. The intel one is like the second in the list of devices and the hp is the last device listed (which it should be since it is in my last PCI slot) How do i tell linux no no no to the intel controller and yes to the HP one. Linux sees the HP as 02:06.0 and reported it as Accton Technology Corperation smc2-1211tx if that would help out any.

Notice something else very stange with my network one i can't use pcilib anymore have no idea why that is and the ifconfig report as such:
Link encap: Local Loopback
inet addr: 127.0.0.1 Mask 255.0.0.0
inet addr: :: 1/28 Scope: host
Up loopback running mtv:16436 Metric:1

And the reason i think it is useing the intel and not the hp is it reports back saying error fetching interface information: device not found using netstat. Which it shouldn't be found since it is broken.

So is there anyway i can make sure it is using the hp. thanks alot.

This ia an easy problem can i have the new directory where the inputdevice section is so i can add mouse button 4 and 5 for scrolling. I looked in /etc/X11 and it was not in there. Thank you
 
Old 12-03-2006, 07:23 AM   #2
tobyl
Member
 
Registered: Apr 2003
Location: uk
Distribution: slackware current
Posts: 767

Rep: Reputation: 60
if you don't want to use the onboard device, why not disable it in the bios?

/etc/X11/xorg.conf well, it should be there...

tobyl
 
Old 12-03-2006, 07:45 AM   #3
shenberry
Member
 
Registered: Nov 2006
Location: New Orleans, LA
Distribution: Slackware 11
Posts: 42

Original Poster
Rep: Reputation: 15
i looked at that file for the mouse also and off hand doesn't seem to have that information for the mouse nor the network adapter
 
Old 12-03-2006, 08:55 AM   #4
Eternal_Newbie
Member
 
Registered: Jun 2005
Location: The Pudding Isles
Distribution: Slackware
Posts: 573

Rep: Reputation: 59
As tobyl said if you don't use your onboard ethernet, disable it in the BIOS. Check your motherboard manual for which key to press to enter the BIOS screen on startup.

xorg.conf does not configure your network adaptors. To enable your scrollwheel, in the second 'InputDevice' section change the protocol to this
Code:
    Option "Protocol"    "IMPS/2"
and add these lines at the end of the section
Code:
   Option "SendCoreEvents"  "true"
   Option "Buttons"         "5"
   Option "ZAxisMapping"    "4 5"
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
RH doesn't detect my Serial modem connected to a PCI Serial card ricky_ds Linux - Hardware 1 08-17-2006 03:37 PM
PCI card modem configuration in redhat version 9 jagabe Linux - Hardware 0 10-26-2004 02:29 AM
SuSE 8.2 & MSP3880W linmodem - No SoftK56 modem PCI card found Cyblob Linux - Hardware 5 10-29-2003 10:53 AM
PCI modem and sound card MADSOT Linux - Hardware 1 09-07-2003 11:14 AM
good pci modem and agp video card with tv? vance Linux - Hardware 3 06-13-2002 01:31 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware

All times are GMT -5. The time now is 06:54 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration