LinuxQuestions.org - Dolphin crashes

- Slackware (https://www.linuxquestions.org/questions/slackware-14/)

- - Dolphin crashes (https://www.linuxquestions.org/questions/slackware-14/dolphin-crashes-841783/)

Hi,
I've installed slackware64 up to date and have a annoying problem:
Dolphin crashes many times. As i'm sick of it, i decide to call for help.
Here is some debug info
************************************

Application: Dolphin (kdeinit4), signal: Segmentation fault
[KCrash Handler]
#6 0x00007faa18e95ad4 in ?? () from /usr/lib64/libdbus-1.so.3
#7 0x00007faa18ea745d in ?? () from /usr/lib64/libdbus-1.so.3
#8 0x00007faa18e9949e in ?? () from /usr/lib64/libdbus-1.so.3
#9 0x00007faa26aa48e3 in ?? () from /usr/lib64/qt/lib/libQtDBus.so.4
#10 0x00007faa26781953 in QObject::event(QEvent*) () from /usr/lib64/qt/lib/libQtCore.so.4
#11 0x00007faa2569979c in QApplicationPrivate::notify_helper(QObject*, QEvent*) () from /usr/lib64/qt/lib/libQtGui.so.4
#12 0x00007faa2569fc8b in QApplication::notify(QObject*, QEvent*) () from /usr/lib64/qt/lib/libQtGui.so.4
#13 0x00007faa2774c636 in KApplication::notify(QObject*, QEvent*) () from /usr/lib64/libkdeui.so.5
#14 0x00007faa26771f0c in QCoreApplication::notifyInternal(QObject*, QEvent*) () from /usr/lib64/qt/lib/libQtCore.so.4
#15 0x00007faa2679ec82 in ?? () from /usr/lib64/qt/lib/libQtCore.so.4
#16 0x00007faa2679b7f8 in ?? () from /usr/lib64/qt/lib/libQtCore.so.4
#17 0x00007faa2163af9e in g_main_context_dispatch () from /usr/lib64/libglib-2.0.so.0
#18 0x00007faa2163e958 in ?? () from /usr/lib64/libglib-2.0.so.0
#19 0x00007faa2163ea80 in g_main_context_iteration () from /usr/lib64/libglib-2.0.so.0
#20 0x00007faa2679b4c3 in QEventDispatcherGlib::processEvents(QFlags<QEventLoop::ProcessEventsFlag>) () from /usr/lib64/qt/lib/libQtCore.so.4
#21 0x00007faa257486ce in ?? () from /usr/lib64/qt/lib/libQtGui.so.4
#22 0x00007faa26770832 in QEventLoop::processEvents(QFlags<QEventLoop::ProcessEventsFlag>) () from /usr/lib64/qt/lib/libQtCore.so.4
#23 0x00007faa26770c0c in QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>) () from /usr/lib64/qt/lib/libQtCore.so.4
#24 0x00007faa2677589b in QCoreApplication::exec() () from /usr/lib64/qt/lib/libQtCore.so.4
#25 0x00007faa19f2387f in kdemain () from /usr/lib64/libkdeinit4_dolphin.so
#26 0x0000000000407ca6 in _start ()
************************+

Thx a lot
EddY

Had you tried the "Search this Forum", you would have found this
http://www.linuxquestions.org/questi...urrent-832297/

Quote:

Originally Posted by allend (Post 4146302)

Had you tried the "Search this Forum", you would have found this
http://www.linuxquestions.org/questi...urrent-832297/

Hi,
Yes, i've searched and i've read.
The 1st thing that i did was to click on find "similar threads" button.

I'm using Slackware64 and i can't find dbus>=1.3 for slack64

I'm using kdexxx-4.5.2-x86_64-1alien

Must wait for new version of DBUS? If so, sorry for my mistake and some Administrator erase this thread, please! I could't understand if that thread was for slack or slack64...

Thx
EddY

Official Slackware still has dbus-1.2.
You need to download the source dbus-1.3.1.tar.gz from here http://cgit.freedesktop.org/dbus/dbus/ into a new subdirectory somewhere called dbus-1.3.1
Add to this subdirectory these files from your Slackware install disk or a mirror
source/a/dbus/dbus.SlackBuild
source/a/dbus/doinst.sh.gz
source/a/dbus/rc.messagebus.gz
source/a/dbus/slack-desc

Edit dbus.SlackBuild
Change line 62 so it reads

Quote:

tar xvf $CWD/$PKGNAM-$VERSION.tar.gz || exit 1

and comment out line 71 so it reads

Quote:

# zcat $CWD/dbus-1.2.x-allow_root_globally.diff.gz | patch -p1 --verbose || exit 1

Open a terminal and do 'su -'
cd to the directory containing the files
'chmod +x dbus.SlackBuild'
'BUILD="1_eddy" ./dbus.SlackBuild'

After the package is built, do
'upgradepkg /tmp/dbus-1.3.1-x86_64-1_eddy.txz

Note: These instructions will not work for dbus-1.4 as there is no configure available. Looks like cmake is the way to go here.

I just downloaded dbus-1.4 and it does have a configure script. Now to reboot and see if there is a problem.

Seems to be just fine!

I have just added another entry to my list of cockups for this week.
I will try another download of dbus-1.4.

dbus-1.4.0 has an autogen.sh script instead of configure.
This dbus.SlackBuild is working for me.

Code:

#!/bin/sh



# Copyright 2007-2010  Robby Workman, Northport, Alabama, USA

# Copyright 2007-2010  Patrick Volkerding, Sebeka, MN, USA

# All rights reserved.

#

# Redistribution and use of this script, with or without modification, is

# permitted provided that the following conditions are met:

#

# 1. Redistributions of this script must retain the above copyright

#    notice, this list of conditions and the following disclaimer.

#

# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED

# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO

# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,

# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;

# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,

# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR

# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF

# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.



PKGNAM=dbus

VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)}

BUILD=${BUILD:-2}



NUMJOBS=${NUMJOBS:-" -j7 "}



# Automatically determine the architecture we're building on:

if [ -z "$ARCH" ]; then

  case "$( uname -m )" in

    i?86) export ARCH=i486 ;;

    arm*) export ARCH=arm ;;

    # Unless $ARCH is already set, use uname -m for all other archs:

      *) export ARCH=$( uname -m ) ;;

  esac

fi



CWD=$(pwd)

TMP=${TMP:-/tmp}

PKG=$TMP/package-$PKGNAM



if [ "$ARCH" = "i486" ]; then

  SLKCFLAGS="-O2 -march=i486 -mtune=i686"

  LIBDIRSUFFIX=""

elif [ "$ARCH" = "s390" ]; then

  SLKCFLAGS="-O2"

  LIBDIRSUFFIX=""

elif [ "$ARCH" = "x86_64" ]; then

  SLKCFLAGS="-O2 -fPIC"

  LIBDIRSUFFIX="64"

else

  SLKCFLAGS="-O2"

  LIBDIRSUFFIX=""

fi



rm -rf $PKG

mkdir -p $TMP $PKG

cd $TMP

rm -rf $PKGNAM-$VERSION

tar xvzf $CWD/$PKGNAM-$VERSION.tar.gz || exit 1

cd $PKGNAM-$VERSION || exit 1

chown -R root:root .

find . \

 \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \

 -exec chmod 755 {} \; -o \

 \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \

 -exec chmod 644 {} \;



# zcat $CWD/dbus-1.2.x-allow_root_globally.diff.gz | patch -p1 --verbose || exit 1



# dbus-1.4.0 has autogen.sh instead of configure

#./configure \

# The following two options are no longer recognized. Both shared and static libraries are built.

#  --enable-shared=yes \

#  --enable-static=no \



CFLAGS="$SLKCFLAGS" \

CXXFLAGS="$SLKCFLAGS" \

./autogen.sh \

  --prefix=/usr \

  --libdir=/usr/lib${LIBDIRSUFFIX} \

  --sysconfdir=/etc \

  --localstatedir=/var \

  --mandir=/usr/man \

  --infodir=/usr/info \

  --docdir=/usr/doc/$PKGNAM-$VERSION \

  --enable-tests=no \

  --enable-ansi=no \

  --enable-verbose-mode=no \

  --enable-asserts=no \

  --enable-xml-docs=no \

  --enable-doxygen-docs=no \

  --enable-selinux=no \

  --enable-libaudit=no \

  --enable-dnotify=no \

  --enable-inotify \

  --with-system-pid-file=/var/run/dbus/dbus.pid \

  --with-system-socket=/var/run/dbus/system_bus_socket \

  --with-init-scripts=slackware \

  --build=$ARCH-slackware-linux



make $NUMJOBS || make || exit 1

make install DESTDIR=$PKG



find $PKG | xargs file | grep -e "executable" -e "shared object" \

  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null



( cd $PKG/usr/man

  find . -type f -exec gzip -9 {} \;

  for i in $( find . -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done

)



# Install a custom init script for dbus - the included one is not good for us

rm $PKG/etc/rc.d/*

zcat $CWD/rc.messagebus.gz > $PKG/etc/rc.d/rc.messagebus.new

chmod 0755 $PKG/etc/rc.d/rc.messagebus.new



# Let's not clobber existing config files

mv $PKG/etc/dbus-1/session.conf $PKG/etc/dbus-1/session.conf.new

mv $PKG/etc/dbus-1/system.conf $PKG/etc/dbus-1/system.conf.new



# Fix some directory ownership

chown messagebus $PKG/var/lib/dbus



# Add documentation

mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION

cp -a \

  AUTHORS COPYING HACKING INSTALL NEWS README doc/*.{txt,html,dtd} \

  $PKG/usr/doc/$PKGNAM-$VERSION

find $PKG/usr/doc/$PKGNAM-$VERSION -type f -exec chmod 644 {} \;



mkdir -p $PKG/install

cat $CWD/slack-desc > $PKG/install/slack-desc

zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh



cd $PKG

/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz

If Dolphin launched on my computer, I'd crash it as soon as I could! Sorry, just had to say it... I really do hope you get it fixed.

Hi,
Thx for your reply, i've just compiled dbus-1.4 and now i'm gonna try dolphin...

I'll give feedback soon...

Thx once again!