DMESG Message re: 'Cable Bits'
I have two PCs with Slackware installed. At boot, each gives a message about 'cable bits' that I do not understand.
Here is the relevent part from DMESG output: Code:
NFORCE2: IDE controller at PCI slot 0000:00:09.0 Thank you. |
Are you using 80 or 40 pin IDE cables?
|
Quote:
I'm using the Akasa 'Rounded Ultra ATA133/100/66 IDE Cables'. I guess that these would be 80 pin. Is this probably the cause of the messages?. |
I would assume, but I'm not sure. If this is the case, you can safely ignore the messages.
|
As a general rule, if Linux tells you "enabling workaround", there's no need to worry. It usually means that the BIOS is out-of-date or slightly faulty but that Linux KNOWS that and has taken account of it to make sure it's not a problem.
Probably updating your motherboard BIOS would get rid of this messages, possibly not though. Either way doesn't matter - Linux detected the problem, fixed it and merely told you as a courtesy. Other "workaround" messages in the kernel are usually the same - things like CPU bugs (the infamous Penntium FDIV bugs etc.), receiver locks within older EtherExpress Pro 100 network cards. I'd say there's a possibility that updating the BIOS or the Linux kernel or using 80-pin IDE cables throughout would fix these messages if they annoy you but that they are in fact completely harmless. |
Quote:
As I said earlier, I am not experiencing any problems, so no need for any action as long as nothing is seriously wrong. One of my PCs exhibiting the phenomenon is an Abit NF7 which already has one of the latest BIOSs (modded). the second is an Abit AN7 which also has one of the last BIOSs released. Both are running the Linux 2.6.16 kernel which is quite new. It is the IDE cables that I still wonder about. They are all the 'rounded' ones that are commercially available. I wonder if these are not particularly good in terms of screening or capacitance. What do you mean by 80-pin cables?. All my rounded cables will be 80-core, but I assume that the connectors can only be 40-pin. |
All times are GMT -5. The time now is 04:10 PM. |