Bumblebee 3 on Slackware 1337 Error
Quote:
Thanks for putting these up. I am running Slackware 1337 on an Aspire with i7-2630QM CPU @ 2.00GHz and Nvidia 540M Optimus. I can install it fine but on running I get Error: couldn't get an RGB, Double-buffered visual A full verbose output is here: Code:
bash-4.1# optirun -vv glxgears I have tried with both direct and indirect rendering set - same error. Any help appreciated, Thanks in advance. |
try adding this line
Code:
export LIBGL_ALWAYS_INDIRECT=1 |
Quote:
Hi, Thanks for the suggestion. I get the same error with this set to 1 or 0. E. |
here's a link to a forum where they have the similar problem like yours
https://github.com/Bumblebee-Project...ebee/issues/41 probably you can find the answer over there as i don't have optimus on my system |
Quote:
That is an interesting link. The problem they have there is that they are using incorrectly installed/configured nouveau drivers. I am using nvidia. However, I will continue to troubleshoot it. It may be a driver issue I am having. I hope to attract the attention of someone within the Slackware community who has experience with using Optimus, hopefully with bumblebee, but I suspect that the actual bumblebee is installed ok, as I have been banging my head against this for a while. Thanks again. :) |
hi
your prob seams to be related to /etc/bumblebee/bumblebee.conf have you these files in /etc/bumblebee/ ? if you have not older version than bb3.0 you need to install libjpeg-turbo too |
Quote:
I think I have all the packages installed. The content of my bumblebee.conf is: Code:
### Bumblebee daemon configuration file. Code:
lspci -vnn | grep '\''[030[02]\]' Thanks. |
is your a fresh installation of bb3.0 or an upgrade from an older one?
- you should remove xorg.conf in /etc/X11 - try to blacklist the nouveau driver - have you added bumblebee group, and started the bumblebeed daemon? you can read https://github.com/Bumblebee-Project...roubleshooting |
Quote:
I added the bumblebee group when I installed it and the daemon runs fine. I will try your other suggestions when I am at my laptop and troubleshoot some more and post the outcome here. Thanks again. :) |
Thank you for your help, teox99. Your first suggestion was correct - it was a problem with the config file.
The problem was that when I uninstalled the previous bumblebee the config file was not removed. The solution was I deleted the bumblebee.conf and re-installed the .tgz That was all I needed to do. Your packages worked perfectly. Thank you. e. :) |
ok!
there are other problems that are still not solved, such as VDPAU and windump, WEBGL acceleration, i hope we find a solution later! |
All times are GMT -5. The time now is 03:19 PM. |