LinuxQuestions.org
Welcome to the most active Linux Forum on the web.
Home Forums Tutorials Articles Register
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware
Reload this Page [SOLVED] another graphics resolution question intel driver.
User Name
Password
Slackware This Forum is for the discussion of Slackware Linux.

Notices


Reply
  Search this Thread
Old 02-21-2010, 12:30 AM   #1
okos
Member
 
Registered: May 2007
Location: California
Distribution: Slackware/Ubuntu
Posts: 609

Rep: Reputation: 38
another graphics resolution question intel driver.

Hi
My kids have huge graphics.
Their card is 82G33/G31 Express Integrated Graphics Controller.
Monitor resolution is 1440x900

According to this link it requires the "intel" driver.

However, I am not able to change the resolution from 1024x768 to 1440x900.

Second question, is it possible to change the amount of memory allotted to video or is it a memory chip on the video card?

xorg.conf
Code:
# File generated by xf86config.

#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# 
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# 
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# 
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of 
# this file.
# **********************************************************************

# NOTE:  This is a NEW IMPROVED version of XF86Config-fbdev that uses the vesa
# driver instead of the fbdev driver.  Thanks to Kenneth Fanyo who pointed
# this out to me. :)

# This XF86Config file is designed for use with the VESA framebuffer.
# This generic interface should work with nearly all video cards
# (although not every card will support every resolution).

# With the new driver, it should no longer be required to have frame buffer
# support in the kernel, or to run it on the console.
#
# Enjoy! :)
# -- volkerdi@slackware.com
#

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"  	# Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the font modules
    Load        "type1"
    Load        "freetype"
    #Load        "speedo"
    Load       "glx"		# This loads the GLX module
    Load       "dri"		# This loads the DRI(direct rendering infrastructure) 3D module #added 1/30/10
   
EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/share/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
# 

    FontPath   "/usr/share/fonts/local/"
    FontPath   "/usr/share/fonts/misc/"
    FontPath   "/usr/share/fonts/OTF/"
    FontPath   "/usr/share/fonts/TTF/"
    FontPath   "/usr/share/fonts/Type1/"
    FontPath   "/usr/share/fonts/CID/"
    FontPath   "/usr/share/fonts/Speedo/"
    FontPath   "/usr/share/fonts/75dpi/:unscaled"
    FontPath   "/usr/share/fonts/100dpi/:unscaled"
    FontPath   "/usr/share/fonts/75dpi/"
    FontPath   "/usr/share/fonts/100dpi/"
    FontPath   "/usr/share/fonts/cyrillic/"

# ModulePath can be used to set a search path for the X server modules.
# The default path is shown here.

#    ModulePath "/usr/lib/xorg/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option     "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option     "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option     "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option     "DontZoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option     "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option     "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option     "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option     "AllowNonLocalModInDev"

# Set the basic blanking screen saver timeout.

#    Option      "blank time"    "10"    # 10 minutes

# Set the DPMS timeouts.  These are set here because they are global
# rather than screen-specific.  These settings alone don't enable DPMS.
# It is enabled per-screen (or per-monitor), and even then only when
# the driver supports it.

#    Option      "standby time"  "20"
#    Option      "suspend time"  "30"
#    Option      "off time"      "60"

# On some platform the server needs to estimate the sizes of PCI
# memory and pio ranges. This is done by assuming that PCI ranges
# don't overlap. Some broken BIOSes tend to set ranges of inactive
# devices wrong. Here one can adjust how aggressive the assumptions
# should be. Default is 0.

# Option   "EstimateSizesAggresively" "0"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier	"Keyboard1"
    Driver	"kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option     "Protocol"      "Xqueue"

# Set the keyboard auto repeat parameters.  Not all platforms implement
# this.

#    Option     "AutoRepeat"    "500 5"

# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).

#    Option     "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.

#    Option     "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a European
# keyboard, you will probably want to use one of:
#
#    Option     "XkbModel"      "pc102"
#    Option     "XkbModel"      "pc105"
#
# If you have a Microsoft Natural keyboard, you can use:
#
#    Option     "XkbModel"      "microsoft"
#
# If you have a US "windows" keyboard you will want:
#
#    Option     "XkbModel"      "pc104"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#
#    Option     "XkbLayout"     "de"
#
# or:
#
#    Option     "XkbLayout"     "de"
#    Option     "XkbVariant"    "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#
#    Option     "XkbOptions"    "ctrl:swapcaps"


# These are the default XKB settings for X.Org
#
#    Option     "XkbRules"      "xorg"
#    Option     "XkbModel"      "pc105"
#    Option     "XkbLayout"     "us"
#    Option     "XkbVariant"    ""
#    Option     "XkbOptions"    ""

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

   Identifier	"Mouse1"
  Driver	"mouse"

# On platforms where PnP mouse detection is supported the following
# protocol setting can be used when using a newer PnP mouse:

#    Option     "Protocol"      "Auto"

# The available mouse protocols types that you can set below are:
#    Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
#    Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
#    MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
#    ThinkingMouse ThinkingMousePS/2 Xqueue
    Option "Protocol"    "PS/2"

# The mouse device.  The device is normally set to /dev/mouse,
# which is usually a symbolic link to the real device.

#    Option "Device"      "/dev/mouse"
#   Option "Device"      "/dev/psaux"
#   Option "Device"      "/dev/ttyS0"
#   Option "Device"      "/dev/ttyS1"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"	"Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"		"9600"
#    Option "SampleRate"	"150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection




# Some examples of extended input devices

# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************


Section "Monitor"

    Identifier  "My Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   31.5 - 50.0

#    HorizSync	30-64         # multisync
#    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 40-90

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

Section "Device"
        Identifier      "Configured Video Device"

        # Add this line to force the driver
        Driver          "intel"
	Option      "DRI"     "true"        # Add this line to force the driver added 1/30/10
	Option      "XAANoOffscreenPixmaps" "true"	# Add this line to force the driver added 1/31/10

EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen 1"
    Device      "Configured Video Device"
    Monitor     "My Monitor"

 
# If your card can handle it, a higher default color depth (like 24 or 32)
# is highly recommended.

#   DefaultDepth 8
#   DefaultDepth 16
   DefaultDepth 24
#   DefaultDepth 32

# "1024x768" is also a conservative usable default resolution.  If you
# have a better monitor, feel free to try resolutions such as
# "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your
# card/monitor can produce)

    Subsection "Display"
        Depth       8
        Modes "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes "1440x900" "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes  "1440x900" "1024x768" "800x600" "640x480"
# Edited 2/20/2010
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes "1440x900" "1024x768" "800x600" "640x480"
    EndSubsection

EndSection
 # **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection
Section "DRI"			#added 1/30/10
    Mode 0666
 EndSection
 
Old 02-21-2010, 01:23 AM   #2
allend
LQ 5k Club
 
Registered: Oct 2003
Location: Melbourne
Distribution: Slackware64-15.0
Posts: 6,371

Rep: Reputation: 2749Reputation: 2749Reputation: 2749Reputation: 2749Reputation: 2749Reputation: 2749Reputation: 2749Reputation: 2749Reputation: 2749Reputation: 2749Reputation: 2749
Are you sure that the HorizSync and VertRefresh ranges are correct for the monitor?
Code:
    HorizSync   31.5 - 50.0

#    HorizSync	30-64         # multisync
#    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 40-90
What if you try with the DefaultDepth=8? i.e.
Code:
   DefaultDepth 8
#   DefaultDepth 16
#   DefaultDepth 24
You will need to change this to test the "1440x900" resolution.
Code:
    Subsection "Display"
        Depth       8
        Modes "1440x900" "1024x768" "800x600" "640x480"
    EndSubsection
It may be that your monitor will only do the higher resolution at low colour depth.
 
Old 02-21-2010, 07:46 PM   #3
Old_Fogie
Senior Member
 
Registered: Mar 2006
Distribution: SLACKWARE 4TW! =D
Posts: 1,519

Rep: Reputation: 63
/var/log/Xorg.O.log should show what the edid reports it can/cannot handle.
 
1 members found this post helpful.
Old 02-22-2010, 10:09 PM   #4
okos
Member
 
Registered: May 2007
Location: California
Distribution: Slackware/Ubuntu
Posts: 609

Original Poster
Rep: Reputation: 38
Do I need to change the hertz to 75? If so, how?
Here is my xorg log
Code:
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Slackware 12.1 Slackware Linux Project
Current Operating System: Linux darkstar 2.6.27.7-smp #2 SMP Thu Nov 20 22:32:43 CST 2008 i686
Build Date: 30 June 2008  11:35:29PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 21 11:04:26 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "My Monitor"
(**) |   |-->Device "Configured Video Device"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/local/" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/CID/" does not exist.
	Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/TTF,/usr/share/fonts/OTF,/usr/share/fonts/Type1,/usr/share/fonts/misc,/usr/share/fonts/75dpi/:unscaled.
(**) FontPath set to:
	#
(**) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d0280
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.3
	X.Org Video Driver: 2.0
	X.Org XInput driver : 2.0
	X.Org Server Extension : 0.3
	X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7

#part removed to fit in post

0xfdcfffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:2:0) Intel Corporation 82G33/G31 Express Integrated Graphics Controller rev 2, Mem @ 0xfdf00000/19, 0xd0000000/28, 0xfdb00000/20, I/O @ 0xff00/3
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 

#Removed section to fit in post

0x0000ff07 (0x8) IX[B](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.

(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.2
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 1.4.2, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 2.4.3
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.3.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.3.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
	965GM, 965GME/GLE, G33, Q35, Q33,
	Mobile Intel® GM45 Express Chipset,
	Intel Integrated Graphics Device, G45/G43, Q45/Q43
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(--) Chipset G33 found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xfddf0000 - 0xfddfffff (0x10000) MX[B]
	[5] -1	0	0xfdffc000 - 0xfdffc0ff (0x100) MX[B]
	[6] -1	0	0xfdffd000 - 0xfdffd3ff (0x400) MX[B]
	[7] -1	0	0xfdff4000 - 0xfdff7fff (0x4000) MX[B]
	[8] -1	0	0xfdffe000 - 0xfdffe3ff (0x400) MX[B]
	[9] -1	0	0xfdfff000 - 0xfdffffff (0x1000) MX[B]
	[10] -1	0	0xfdfc0000 - 0xfdfdffff (0x20000) MX[B]
	[11] -1	0	0xfdb00000 - 0xfdbfffff (0x100000) MX[B](B)
	[12] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[13] -1	0	0xfdf00000 - 0xfdf7ffff (0x80000) MX[B](B)
	[14] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[15] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[16] -1	0	0x0000df00 - 0x0000df07 (0x8) IX[B]
	[17] -1	0	0x0000eb00 - 0x0000eb0f (0x10) IX[B]
	[18] -1	0	0x0000ec00 - 0x0000ec0f (0x10) IX[B]
	[19] -1	0	0x0000ed00 - 0x0000ed03 (0x4) IX[B]
	[20] -1	0	0x0000ee00 - 0x0000ee07 (0x8) IX[B]
	[21] -1	0	0x0000ef00 - 0x0000ef03 (0x4) IX[B]
	[22] -1	0	0x0000f000 - 0x0000f007 (0x8) IX[B]
	[23] -1	0	0x00000500 - 0x0000051f (0x20) IX[B]
	[24] -1	0	0x0000f200 - 0x0000f20f (0x10) IX[B]
	[25] -1	0	0x0000f300 - 0x0000f30f (0x10) IX[B]
	[26] -1	0	0x0000f400 - 0x0000f403 (0x4) IX[B]
	[27] -1	0	0x0000f500 - 0x0000f507 (0x8) IX[B]
	[28] -1	0	0x0000f600 - 0x0000f603 (0x4) IX[B]
	[29] -1	0	0x0000f700 - 0x0000f707 (0x8) IX[B]
	[30] -1	0	0x0000f800 - 0x0000f81f (0x20) IX[B]
	[31] -1	0	0x0000f900 - 0x0000f91f (0x20) IX[B]
	[32] -1	0	0x0000fa00 - 0x0000fa1f (0x20) IX[B]
	[33] -1	0	0x0000fb00 - 0x0000fb1f (0x20) IX[B]
	[34] -1	0	0x0000fc00 - 0x0000fc1f (0x20) IX[B]
	[35] -1	0	0x0000fd00 - 0x0000fd1f (0x20) IX[B]
	[36] -1	0	0x0000fe00 - 0x0000fe1f (0x20) IX[B]
	[37] -1	0	0x0000ff00 - 0x0000ff07 (0x8) IX[B](B)
(II) resource ranges after probing:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xfddf0000 - 0xfddfffff (0x10000) MX[B]
	[5] -1	0	0xfdffc000 - 0xfdffc0ff (0x100) MX[B]
	[6] -1	0	0xfdffd000 - 0xfdffd3ff (0x400) MX[B]
	[7] -1	0	0xfdff4000 - 0xfdff7fff (0x4000) MX[B]
	[8] -1	0	0xfdffe000 - 0xfdffe3ff (0x400) MX[B]
	[9] -1	0	0xfdfff000 - 0xfdffffff (0x1000) MX[B]
	[10] -1	0	0xfdfc0000 - 0xfdfdffff (0x20000) MX[B]
	[11] -1	0	0xfdb00000 - 0xfdbfffff (0x100000) MX[B](B)
	[12] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[13] -1	0	0xfdf00000 - 0xfdf7ffff (0x80000) MX[B](B)
	[14] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[15] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[16] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[17] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[18] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[19] -1	0	0x0000df00 - 0x0000df07 (0x8) IX[B]
	[20] -1	0	0x0000eb00 - 0x0000eb0f (0x10) IX[B]
	[21] -1	0	0x0000ec00 - 0x0000ec0f (0x10) IX[B]
	[22] -1	0	0x0000ed00 - 0x0000ed03 (0x4) IX[B]
	[23] -1	0	0x0000ee00 - 0x0000ee07 (0x8) IX[B]
	[24] -1	0	0x0000ef00 - 0x0000ef03 (0x4) IX[B]
	[25] -1	0	0x0000f000 - 0x0000f007 (0x8) IX[B]
	[26] -1	0	0x00000500 - 0x0000051f (0x20) IX[B]
	[27] -1	0	0x0000f200 - 0x0000f20f (0x10) IX[B]
	[28] -1	0	0x0000f300 - 0x0000f30f (0x10) IX[B]
	[29] -1	0	0x0000f400 - 0x0000f403 (0x4) IX[B]
	[30] -1	0	0x0000f500 - 0x0000f507 (0x8) IX[B]
	[31] -1	0	0x0000f600 - 0x0000f603 (0x4) IX[B]
	[32] -1	0	0x0000f700 - 0x0000f707 (0x8) IX[B]
	[33] -1	0	0x0000f800 - 0x0000f81f (0x20) IX[B]
	[34] -1	0	0x0000f900 - 0x0000f91f (0x20) IX[B]
	[35] -1	0	0x0000fa00 - 0x0000fa1f (0x20) IX[B]
	[36] -1	0	0x0000fb00 - 0x0000fb1f (0x20) IX[B]
	[37] -1	0	0x0000fc00 - 0x0000fc1f (0x20) IX[B]
	[38] -1	0	0x0000fd00 - 0x0000fd1f (0x20) IX[B]
	[39] -1	0	0x0000fe00 - 0x0000fe1f (0x20) IX[B]
	[40] -1	0	0x0000ff00 - 0x0000ff07 (0x8) IX[B](B)
	[41] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[42] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.1.0
	ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 0.1.0
	ABI class: X.Org Video Driver, version 2.0
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "DRI" "true"
(II) intel(0): Integrated Graphics Chipset: Intel(R) G33
(--) intel(0): Chipset: "G33"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xFDF00000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 8128 kB
(II) intel(0): VESA VBE OEM: Intel(r)Q33/Q35/G33 Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)Q33/Q35/G33 Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section My Monitor
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "DEL", prod id 61449
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1440x900"x59.9  106.50  1440 1528 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
(II) intel(0): Modeline "1152x864"x74.8  104.00  1152 1224 1344 1536  864 867 871 905 -hsync +vsync (67.7 kHz)
(II) intel(0): Modeline "1280x1024"x59.9  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) intel(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz)
(II) intel(0): EDID vendor "DEL", prod id 61449
(II) intel(0): Output VGA connected
(II) intel(0): Output VGA using initial mode 1024x768
(II) intel(0): detected 1024 kB GTT.
(II) intel(0): detected 7164 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (410, 260) mm
(**) intel(0): DPI set to (63, 100)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 2.2.0
	ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to 0x00000b00
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000202 to 0x00000000
(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status:
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xfdb00000 - 0xfdbfffff (0x100000) MS[B]
	[1] 0	0	0xd0000000 - 0xdfffffff (0x10000000) MS[B]
	[2] 0	0	0xfdf00000 - 0xfdf7ffff (0x80000) MS[B]
	[3] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[4] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[5] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[6] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[7] -1	0	0xfddf0000 - 0xfddfffff (0x10000) MX[B]
	[8] -1	0	0xfdffc000 - 0xfdffc0ff (0x100) MX[B]
	[9] -1	0	0xfdffd000 - 0xfdffd3ff (0x400) MX[B]
	[10] -1	0	0xfdff4000 - 0xfdff7fff (0x4000) MX[B]
	[11] -1	0	0xfdffe000 - 0xfdffe3ff (0x400) MX[B]
	[12] -1	0	0xfdfff000 - 0xfdffffff (0x1000) MX[B]
	[13] -1	0	0xfdfc0000 - 0xfdfdffff (0x20000) MX[B]
	[14] -1	0	0xfdb00000 - 0xfdbfffff (0x100000) MX[B](B)
	[15] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[16] -1	0	0xfdf00000 - 0xfdf7ffff (0x80000) MX[B](B)
	[17] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
	[18] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
	[19] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
	[20] 0	0	0x0000ff00 - 0x0000ff07 (0x8) IS[B]
	[21] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[22] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[23] -1	0	0x0000df00 - 0x0000df07 (0x8) IX[B]
	[24] -1	0	0x0000eb00 - 0x0000eb0f (0x10) IX[B]
	[25] -1	0	0x0000ec00 - 0x0000ec0f (0x10) IX[B]
	[26] -1	0	0x0000ed00 - 0x0000ed03 (0x4) IX[B]
	[27] -1	0	0x0000ee00 - 0x0000ee07 (0x8) IX[B]
	[28] -1	0	0x0000ef00 - 0x0000ef03 (0x4) IX[B]
	[29] -1	0	0x0000f000 - 0x0000f007 (0x8) IX[B]
	[30] -1	0	0x00000500 - 0x0000051f (0x20) IX[B]
	[31] -1	0	0x0000f200 - 0x0000f20f (0x10) IX[B]
	[32] -1	0	0x0000f300 - 0x0000f30f (0x10) IX[B]
	[33] -1	0	0x0000f400 - 0x0000f403 (0x4) IX[B]
	[34] -1	0	0x0000f500 - 0x0000f507 (0x8) IX[B]
	[35] -1	0	0x0000f600 - 0x0000f603 (0x4) IX[B]
	[36] -1	0	0x0000f700 - 0x0000f707 (0x8) IX[B]
	[37] -1	0	0x0000f800 - 0x0000f81f (0x20) IX[B]
	[38] -1	0	0x0000f900 - 0x0000f91f (0x20) IX[B]
	[39] -1	0	0x0000fa00 - 0x0000fa1f (0x20) IX[B]
	[40] -1	0	0x0000fb00 - 0x0000fb1f (0x20) IX[B]
	[41] -1	0	0x0000fc00 - 0x0000fc1f (0x20) IX[B]
	[42] -1	0	0x0000fd00 - 0x0000fd1f (0x20) IX[B]
	[43] -1	0	0x0000fe00 - 0x0000fe1f (0x20) IX[B]
	[44] -1	0	0x0000ff00 - 0x0000ff07 (0x8) IX[B](B)
	[45] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[46] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 488704 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1954812 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] loaded kernel module for "i915" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xfdf00000
(II) intel(0): [drm] ring buffer = 0xd0000000
(II) intel(0): [drm] mapped front buffer at 0xd0400000, handle = 0xd0400000
(II) intel(0): [drm] mapped back buffer at 0xd1400000, handle = 0xd1400000
(II) intel(0): [drm] mapped depth buffer at 0xd1800000, handle = 0xd1800000
(II) intel(0): [drm] mapped classic textures at 0xd1c00000, handle = 0xd1c00000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(==) intel(0): Write-combining range (0xd0000000,0x10000000)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 12582912 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x006ff000 (pgoffset 1791)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00800000 (pgoffset 2048)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01400000 (pgoffset 5120)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01800000 (pgoffset 6144)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x01c00000 (pgoffset 7168)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
(II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
(II) intel(0): 0x00032000-0x00032fff: overlay registers (4 kB)
(II) intel(0): 0x00033000-0x00033fff: HW status (4 kB)
(II) intel(0): 0x00400000-0x007fffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x006ff000:            end of stolen memory
(II) intel(0): 0x00800000-0x013fffff: exa offscreen (12288 kB)
(II) intel(0): 0x01400000-0x017fffff: back buffer (4096 kB) X tiled
(II) intel(0): 0x01800000-0x01bfffff: depth buffer (4096 kB) X tiled
(II) intel(0): 0x01c00000-0x03bfffff: classic textures (32768 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane A is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is off
(II) intel(0):   Display plane B is now disabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe A
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(WW) intel(0): Option "XAANoOffscreenPixmaps" is not used
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 408 x 255
(**) Option "Protocol" "PS/2"
(WW) Mouse1: No Device specified, looking for one...
(II) Mouse1: Setting Device option to "/dev/input/mice"
(--) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Mouse1: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 9
(**) Mouse1: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Keyboard1: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) evaluating device (Keyboard1)
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) evaluating device (Mouse1)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
(EE) Error compiling keymap (server-0)
(EE) XKB: Couldn't compile keymap
(EE) Error compiling keymap (server-0)
(EE) XKB: Couldn't compile keymap
(II) 3rd Button detected: disabling emulate3Button
SetClientVersion: 0 9
SetGrabKeysState - disabled
SetGrabKeysState - enabled
SetClientVersion: 0 9
SetGrabKeysState - disabled
SetGrabKeysState - enabled
SetClientVersion: 0 9
SetGrabKeysState - disabled
SetGrabKeysState - enabled
SetClientVersion: 0 9
SetGrabKeysState - disabled
SetGrabKeysState - enabled
SetClientVersion: 0 9
SetGrabKeysState - disabled
SetGrabKeysState - enabled
SetClientVersion: 0 9
SetGrabKeysState - disabled
SetGrabKeysState - enabled
SetClientVersion: 0 9
SetGrabKeysState - disabled
SetGrabKeysState - enabled
SetClientVersion: 0 9
SetGrabKeysState - disabled
SetGrabKeysState - enabled
SetClientVersion: 0 9
SetGrabKeysState - disabled
SetGrabKeysState - enabled
SetClientVersion: 0 9
SetGrabKeysState - disabled
SetGrabKeysState - enabled
SetClientVersion: 0 9
SetGrabKeysState - disabled
SetGrabKeysState - enabled
SetClientVersion: 0 9
SetGrabKeysState - disabled
SetGrabKeysState - enabled
SetClientVersion: 0 9
SetGrabKeysState - disabled
SetGrabKeysState - enabled
(EE) Error compiling keymap (server-0)
(EE) XKB: Couldn't compile keymap
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(II) intel(0): xf86UnbindGARTMemory: unbind key 4
(II) intel(0): [drm] removed 1 reserved context for kernel
(II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xf920a000 at 0xb7f50000
(II) intel(0): [drm] Closed DRM master.
FreeFontPath: FPE "/usr/share/fonts/misc/" refcount is 2, should be 1; fixing.
 
Old 02-23-2010, 12:13 AM   #5
allend
LQ 5k Club
 
Registered: Oct 2003
Location: Melbourne
Distribution: Slackware64-15.0
Posts: 6,371

Rep: Reputation: 2749Reputation: 2749Reputation: 2749Reputation: 2749Reputation: 2749Reputation: 2749Reputation: 2749Reputation: 2749Reputation: 2749Reputation: 2749Reputation: 2749
Googling this
Quote:
EDID vendor "DEL", prod id 61449
suggests that you have a DELL S199WFP monitor that has a native resolution of 1440x900@60Hz.
The horizontal frequency range is 30-83 kHz.
The vertical frequency range is 56-75 Hz.

Try changing to:
HorizSync 30-83
VertRefresh 56-75
 
1 members found this post helpful.
Old 02-23-2010, 11:01 PM   #6
okos
Member
 
Registered: May 2007
Location: California
Distribution: Slackware/Ubuntu
Posts: 609

Original Poster
Rep: Reputation: 38
Quote:
Originally Posted by allend View Post
Googling this

suggests that you have a DELL S199WFP monitor that has a native resolution of 1440x900@60Hz.
The horizontal frequency range is 30-83 kHz.
The vertical frequency range is 56-75 Hz.

Try changing to:
HorizSync 30-83
VertRefresh 56-75
You are correct on the monitor.
I googled
Quote:
EDID vendor "DEL", prod id 61449
I did not find that info.
Which link?

[edit]
I assume you found this link
http://archive.netbsd.se/?ml=&a=2009-01&t=10277639

Ill give it a try and let you know in a few days.
Thanks
Last edited by okos; 02-23-2010 at 11:18 PM.
 
Old 03-06-2010, 11:36 AM   #7
okos
Member
 
Registered: May 2007
Location: California
Distribution: Slackware/Ubuntu
Posts: 609

Original Poster
Rep: Reputation: 38
Quote:
Originally Posted by allend View Post
Googling this

suggests that you have a DELL S199WFP monitor that has a native resolution of 1440x900@60Hz.
The horizontal frequency range is 30-83 kHz.
The vertical frequency range is 56-75 Hz.

Try changing to:
HorizSync 30-83
VertRefresh 56-75
YES!!!!
Thanks a bunch.
I work long hours and did not get a chance to mess with my kid's computer. I did it today and it worked.
I also learned something here about EDID .

Thanks
okos
 
  


Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
intel 945 graphics and 1280x1024 resolution otoomet Linux - Hardware 7 10-04-2007 07:17 AM
Intel Extreme Graphics 865GBF graphics driver _UnPrEdictAbLe_ Linux - Hardware 3 07-31-2006 01:48 AM
Screen resolution Slackware 10.2 Intel Graphics.. anti.corp Slackware 24 12-02-2005 02:40 PM
: Intel® 865G Chipset with Intel® Extreme Graphics 2 -driver for linux7.0 ker 2.4.1 schandak Red Hat 1 10-28-2004 12:43 AM
Resolution not right with Intel 845GL graphics alan4482 Fedora 5 12-29-2003 07:17 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware

All times are GMT -5. The time now is 04:08 AM.

Contact Us - Advertising Info - Rules - Privacy - LQ Merchandise - Donations - Contributing Member - LQ Sitemap -
Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration