Slackware This Forum is for the discussion of Slackware Linux.
Notices
Welcome to
LinuxQuestions.org , a friendly and active Linux Community.
You are currently viewing LQ as a guest. By joining our community you will have the ability to post topics, receive our newsletter, use the advanced search, subscribe to threads and access many other special features. Registration is quick, simple and absolutely free.
Join our community today!
Note that registered members see fewer ads, and ContentLink is completely disabled once you log in.
Are you new to LinuxQuestions.org? Visit the following links:
Site Howto |
Site FAQ |
Sitemap |
Register Now
If you have any problems with the registration process or your account login, please
contact us . If you need to reset your password,
click here .
Having a problem logging in? Please visit this page to clear all LQ-related cookies.
Get a
virtual cloud desktop with the Linux distro that you want in less than five minutes with Shells! With over 10 pre-installed distros to choose from, the worry-free installation life is here! Whether you are a digital nomad or just looking for flexibility, Shells can put your Linux machine on the device that you want to use.
Exclusive for LQ members, get up to 45% off per month.
Click here for more info.
#1
LQ Newbie
Registered: Jul 2004
Location: Phoenix
Distribution: Slackware 10.0
Posts: 4
Rep:
2.6.7 & 2.6.8-rc1 + Problems with 7in1 USB Card Reader
Ok, I just installed Slackware the other day and with the default kernel 2.4.26 my In-win USB Card Reader worked fine, I upgraded to 2.6.7 off of the second cd and ever since, my card reader has stopped working. I thought the problem might be with 2.6.7 in general, but it still doesn't work and does the exact same thing in 2.6.8-rc1 (which I upgraded to yesterday). My card reader isn't accepting a new address, which is what dmesg reports whenever I unplug it and plug it back in. I have all of the required modules loaded and have SCSI support built into the kernel. Below is my dmesg output and my lsmod output. Any help would be very much appreciated as I have no idea what to do next :\ USB Core support is built into the kernel btw.
Code:
USB Mass Storage support registered.
usb 1-3: new high speed USB device using address 5
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: IN-WIN Model: iAPP HS-CF Rev: 1.63
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0
USB Mass Storage device found at 5
usb 1-3: USB disconnect, address 5
usb 1-3: new high speed USB device using address 6
usb 1-3: device not accepting address 6, error -71
usb 1-3: new high speed USB device using address 7
usb 1-3: device not accepting address 7, error -71
Code:
Module Size Used by
usb_storage 64576 0
ipv6 227972 10
ohci_hcd 18308 0
joydev 8000 0
usblp 11136 0
eth1394 17544 0
via_agp 7040 1
snd_emu10k1 93704 1
snd_rawmidi 21796 1 snd_emu10k1
snd_pcm 84744 1 snd_emu10k1
snd_timer 22532 1 snd_pcm
snd_seq_device 7688 2 snd_emu10k1,snd_rawmidi
snd_ac97_codec 69636 1 snd_emu10k1
snd_page_alloc 11016 2 snd_emu10k1,snd_pcm
snd_util_mem 3968 1 snd_emu10k1
snd_hwdep 8580 1 snd_emu10k1
snd 50916 10 snd_emu10k1,snd_rawmidi,snd_pcm,snd_timer,snd_seq_device,snd_ac97_codec,snd_util_mem,snd_hwdep
soundcore 7136 1 snd
emu10k1_gp 2816 0
gameport 3712 1 emu10k1_gp
ohci1394 31236 0
ieee1394 93112 2 eth1394,ohci1394
uhci_hcd 29072 0
ehci_hcd 27652 0
via_rhine 18568 0
mii 4224 1 via_rhine
crc32 4096 1 via_rhine
nvidia 4819124 12
ndiswrapper 74112 0
nls_utf8 1792 1
ntfs 132852 1
ide_scsi 14084 0
st 35100 0
evdev 7552 0
sg 29088 0
agpgart 28200 2 via_agp
psmouse 18696 0
reiserfs 230608 1
#2
Senior Member
Registered: May 2003
Location: Malaysia
Distribution: Slackware, LFS, CentOS
Posts: 1,307
Rep:
Try what I did in
this thread .
Warning for the faint hearted: It involves kernel patching
#3
LQ Newbie
Registered: Jul 2004
Location: Phoenix
Distribution: Slackware 10.0
Posts: 4
Original Poster
Rep:
Ok, I patched my kernel, but it still doesn't work. Here's my dmesg output. Any thoughts? :\
Code:
PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 11 (level, low) -> IRQ 11
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0xbc00-0xbc07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xbc08-0xbc0f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD800JB-00ETA0, ATA DISK drive
hdb: WDC WD800JB-00DUA3, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: LITE-ON DVDRW LDW-851S, ATAPI CD/DVD-ROM drive
hdd: LITE-ON COMBO SOHC-5232K, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hda: hda1 < hda5 > hda2
hdb: max request size: 1024KiB
hdb: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hdb: hdb1
hdd: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
ReiserFS: hda2: found reiserfs format "3.6" with standard journal
ReiserFS: hda2: using ordered data mode
ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda2: checking transaction log (hda2)
ReiserFS: hda2: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... okay
Freeing unused kernel memory: 160k freed
Adding 497972k swap on /dev/hda5. Priority:-1 extents:1
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
Linux agpgart interface v0.100 (c) Dave Jones
st: Version 20040403, fixed bufsize 32768, s/g segs 256
ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as devic
e
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: LITE-ON Model: DVDRW LDW-851S Rev: GS0A
Type: CD-ROM ANSI SCSI revision: 02
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5
NTFS driver 2.1.15 [Flags: R/W MODULE].
NTFS-fs warning (device hdb1): ntfs_fill_super(): Atime updates are not implemen
ted yet. Disabling them.
NTFS volume version 3.1.
ndiswrapper version 0.8 loaded
ndiswrapper adding bcmwl5.sys
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 11 (level, low) -> IRQ 11
divert: allocating divert_blk for wlan0
wlan0: ndiswrapper ethernet device 00:0c:41:5f:c1:28 using driver bcmwl5.sys
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6106 Wed Jun 23 08:14:
01 PDT 2004
via-rhine.c:v1.10-LK1.1.20-2.6 May-23-2004 Written by Donald Becker
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 11 (level, low) -> IRQ 11
divert: allocating divert_blk for eth0
eth0: VIA Rhine II at 0xe300d000, 00:50:8d:fd:78:a6, IRQ 11.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link c1e1.
ACPI: PCI interrupt 0000:00:0e.2[C] -> GSI 7 (level, low) -> IRQ 7
ehci_hcd 0000:00:0e.2: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:0e.2: irq 7, pci mem e09fa000
ehci_hcd 0000:00:0e.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0e.2: USB 2.0 enabled, EHCI 0.95, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
eth0: Setting full-duplex based on MII #1 link partner capability of c1e1.
ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:10.3: VIA Technologies, Inc. USB 2.0 (#2)
ehci_hcd 0000:00:10.3: irq 10, pci mem e09fc000
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:0e.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:0e.0: irq 10, io base 0000a800
uhci_hcd 0000:00:0e.0: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:0e.1[B] -> GSI 3 (level, low) -> IRQ 3
uhci_hcd 0000:00:0e.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(#2)
usb 1-1: new high speed USB device using address 2
uhci_hcd 0000:00:0e.1: irq 3, io base 0000ac00
uhci_hcd 0000:00:0e.1: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(#3)
uhci_hcd 0000:00:10.0: irq 11, io base 0000b000
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 3 (level, low) -> IRQ 3
uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(#4)
usb 1-1: device not accepting address 2, error -71
usb 1-1: new high speed USB device using address 3
uhci_hcd 0000:00:10.1: irq 3, io base 0000b400
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 6
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 7 (level, low) -> IRQ 7
uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(#5)
uhci_hcd 0000:00:10.2: irq 7, io base 0000b800
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 7
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usb 1-1: string descriptor 0 read error: -71
usb 1-1: string descriptor 0 read error: -71
usb 1-1: string descriptor 0 read error: -71
usb-storage: probe of 1-1:1.0 failed with error -1
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ACPI: PCI interrupt 0000:00:0a.2[B] -> GSI 11 (level, low) -> IRQ 11
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[e300a000-e300a7ff] Max
Packet=[2048]
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 11 (level, low) -> IRQ 11
ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[e300e000-e300e7ff] Max
Packet=[2048]
gameport: pci0000:00:0a.1 speed 1217 kHz
usb 1-1: USB disconnect, address 3
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
agpgart: Detected VIA KT400/KT400A/KT600 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 128M @ 0xd0000000
usb 1-1: new high speed USB device using address 4
scsi1 : SCSI emulation for USB Mass Storage devices
USB Mass Storage device found at 4
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c00910062eb]
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
ip1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
divert: not allocating divert_blk for non-ethernet device eth1
ip1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
divert: not allocating divert_blk for non-ethernet device eth2
ip1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host1)
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
ieee1394: Host added: ID:BUS[1-00:1023] GUID[00508d0000fe78a6]
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
usb 5-1: new full speed USB device using address 2
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 pr
oto 2 vid 0x03F0 pid 0x6104
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
usb 5-2: new low speed USB device using address 3
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:10.0-2
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
usb 1-1: USB disconnect, address 4
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
usb 1-1: new high speed USB device using address 5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
usb 1-1: device not accepting address 5, error -71
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
usb 1-1: new high speed USB device using address 6
usb-storage: probe of 1-1:1.0 failed with error -1
usb 1-1: USB disconnect, address 6
ehci_hcd 0000:00:0e.2: qh de27e080 (#0) state 1
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
usb 1-1: new high speed USB device using address 7
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
usb-storage: probe of 1-1:1.0 failed with error -1
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
usb 1-1: USB disconnect, address 7
usb 1-1: new high speed USB device using address 8
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
usb 1-1: unable to read config index 0 descriptor/start
usb 1-1: can't read configurations, error -71
ehci_hcd 0000:00:0e.2: qh de27e100 (#0) state 1
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
usb 1-1: new high speed USB device using address 10
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
usb 1-1: string descriptor 0 read error: -71
usb 1-1: string descriptor 0 read error: -71
usb 1-1: string descriptor 0 read error: -71
usb-storage: probe of 1-1:1.0 failed with error -1
usb 1-1: USB disconnect, address 10
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
usb 1-1: new high speed USB device using address 11
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
scsi2 : SCSI emulation for USB Mass Storage devices
USB Mass Storage device found at 11
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
usb 1-1: USB disconnect, address 11
usb 1-1: new high speed USB device using address 12
usb 1-1: device not accepting address 12, error -71
usb 1-1: new high speed USB device using address 13
usb 1-1: string descriptor 0 read error: -71
usb 1-1: string descriptor 0 read error: -71
usb 1-1: string descriptor 0 read error: -71
usb-storage: probe of 1-1:1.0 failed with error -1
usb 1-1: USB disconnect, address 13
ehci_hcd 0000:00:0e.2: qh de27e180 (#0) state 1
usb 1-1: new high speed USB device using address 14
usb-storage: probe of 1-1:1.0 failed with error -1
usb 1-1: USB disconnect, address 14
ehci_hcd 0000:00:0e.2: qh de27e200 (#0) state 1
usb 1-1: new high speed USB device using address 15
usb 1-1: device not accepting address 15, error -71
usb 1-1: new high speed USB device using address 16
usb 1-1: device not accepting address 16, error -71
NET: Registered protocol family 10
Disabled Privacy Extensions on device c035fc00(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
eth0: no IPv6 routers present
wlan0: no IPv6 routers present
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
Last edited by sn0b0ard; 07-23-2004 at 02:28 PM .
#4
LQ Guru
Registered: Mar 2004
Distribution: Slackware
Posts: 6,552
If I take the files /usr/src/linux/include/asm-generic/errno-base.h and /usr/src/linux/include/asm-generic/errno.h, I understand :shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5 usb 1-1: device not accepting address 5, error -71
#5
LQ Newbie
Registered: Jul 2004
Location: Phoenix
Distribution: Slackware 10.0
Posts: 4
Original Poster
Rep:
Quote:
Originally posted by keefaz If I take the files /usr/src/linux/include/asm-generic/errno-base.h and /usr/src/linux/include/asm-generic/errno.h, I understand :shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5 usb 1-1: device not accepting address 5, error -71
rc.hotplug is executable, rc.udev is executable. I have a /sys directory and it has subdirectories.
#6
LQ Newbie
Registered: Jul 2004
Location: Phoenix
Distribution: Slackware 10.0
Posts: 4
Original Poster
Rep:
Update:
All times are GMT -5. The time now is 06:00 PM .
LinuxQuestions.org is looking for people interested in writing
Editorials, Articles, Reviews, and more. If you'd like to contribute
content, let us know .
