[SOLVED] 14.1 multilib, lost my mplayer -vo gl

Linux.tar.gz · 12-06-2013, 02:25 PM

Hi,

Switched my new 14.1 to multilib and i can't play videos with mplayer -vo gl.

ReaperX7 · 12-06-2013, 10:42 PM

Are you using a proprietary driver?

Linux.tar.gz · 12-07-2013, 07:22 AM

No, i'm on the kernel radeon driver.

Linux.tar.gz · 12-08-2013, 05:50 PM

I've noticed that /usr/lib64/libGL.so was removed.
Something went wrong somewhere :/ .

Linux.tar.gz · 12-09-2013, 05:24 AM

I reinstalled the whole x/ from the 14.1 64 set, no success.

Drakeo · 12-09-2013, 06:03 AM

by any chance you using the nvidia proprietary or an amd ?install with multi arch from alien bob.
this already happen to me. but I also found that for some odd reason in the menu it was.
trying to run mplayer instaed of gmplayer. so I changed that to gmplayer and all was well.
As like you I did what you did. then finally I opened my terminall typed gmplayer.
give it a try.
not sure but I think the mplayer.desktop is the problem. It was on mine.

adamk75 · 12-09-2013, 07:48 AM

Quote:

Originally Posted by Linux.tar.gz

I reinstalled the whole x/ from the 14.1 64 set, no success.

Show us your /var/log/Xorg.0.log file.

Adam

Linux.tar.gz · 12-09-2013, 07:55 AM

I don't use proprietary drivers.

Here is the xorg log.

Quote:

[ 48.404]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 48.404] X Protocol Version 11, Revision 0
[ 48.404] Build Operating System: Slackware 14.1 Slackware Linux Project
[ 48.404] Current Operating System: Linux x64 3.10.17 #2 SMP Wed Oct 23 16:34:38 CDT 2013 x86_64
[ 48.404] Kernel command line: BOOT_IMAGE=Linux ro root=801 vt.default_utf8=1
[ 48.404] Build Date: 09 October 2013 08:27:11PM
[ 48.404]
[ 48.404] Current version of pixman: 0.30.2
[ 48.404] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 48.404] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 48.405] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec 9 11:49:58 2013
[ 48.493] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 48.508] (==) No Layout section. Using the first Screen section.
[ 48.508] (==) No screen section available. Using defaults.
[ 48.508] (**) |-->Screen "Default Screen Section" (0)
[ 48.508] (**) | |-->Monitor "<default monitor>"
[ 48.509] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 48.509] (==) Automatically adding devices
[ 48.509] (==) Automatically enabling devices
[ 48.509] (==) Automatically adding GPU devices
[ 48.509] (WW) The directory "/usr/share/fonts/local" does not exist.
[ 48.509] Entry deleted from font path.
[ 48.509] (WW) The directory "/usr/share/fonts/CID" does not exist.
[ 48.509] Entry deleted from font path.
[ 48.542] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi/:unscaled,
/usr/share/fonts/100dpi/:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi,
/usr/share/fonts/cyrillic
[ 48.542] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 48.542] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 48.543] (II) Loader magic: 0x7f6d20
[ 48.543] (II) Module ABI versions:
[ 48.543] X.Org ANSI C Emulation: 0.4
[ 48.543] X.Org Video Driver: 14.1
[ 48.543] X.Org XInput driver : 19.1
[ 48.543] X.Org Server Extension : 7.0
[ 48.543] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 48.545] (--) PCI:*(0:1:5:0) 1002:9610:1458:d000 rev 0, Mem @ 0xd0000000/268435456, 0xfdae0000/65536, 0xfd900000/1048576, I/O @ 0x0000ce00/256
[ 48.545] (II) Open ACPI successful (/var/run/acpid.socket)
[ 48.566] Initializing built-in extension Generic Event Extension
[ 48.566] Initializing built-in extension SHAPE
[ 48.566] Initializing built-in extension MIT-SHM
[ 48.566] Initializing built-in extension XInputExtension
[ 48.566] Initializing built-in extension XTEST
[ 48.566] Initializing built-in extension BIG-REQUESTS
[ 48.566] Initializing built-in extension SYNC
[ 48.566] Initializing built-in extension XKEYBOARD
[ 48.566] Initializing built-in extension XC-MISC
[ 48.566] Initializing built-in extension XINERAMA
[ 48.566] Initializing built-in extension XFIXES
[ 48.566] Initializing built-in extension RENDER
[ 48.566] Initializing built-in extension RANDR
[ 48.566] Initializing built-in extension COMPOSITE
[ 48.566] Initializing built-in extension DAMAGE
[ 48.566] Initializing built-in extension MIT-SCREEN-SAVER
[ 48.566] Initializing built-in extension DOUBLE-BUFFER
[ 48.566] Initializing built-in extension RECORD
[ 48.566] Initializing built-in extension DPMS
[ 48.566] Initializing built-in extension X-Resource
[ 48.566] Initializing built-in extension XVideo
[ 48.566] Initializing built-in extension XVideo-MotionCompensation
[ 48.566] Initializing built-in extension XFree86-VidModeExtension
[ 48.566] Initializing built-in extension XFree86-DGA
[ 48.566] Initializing built-in extension XFree86-DRI
[ 48.566] Initializing built-in extension DRI2
[ 48.566] (II) LoadModule: "glx"
[ 48.665] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 48.692] (II) Module glx: vendor="X.Org Foundation"
[ 48.692] compiled for 1.14.3, module version = 1.0.0
[ 48.692] ABI class: X.Org Server Extension, version 7.0
[ 48.692] (==) AIGLX enabled
[ 48.692] Loading extension GLX
[ 48.693] (==) Matched ati as autoconfigured driver 0
[ 48.693] (==) Matched ati as autoconfigured driver 1
[ 48.693] (==) Matched vesa as autoconfigured driver 2
[ 48.693] (==) Matched modesetting as autoconfigured driver 3
[ 48.693] (==) Matched fbdev as autoconfigured driver 4
[ 48.693] (==) Assigned the driver to the xf86ConfigLayout
[ 48.693] (II) LoadModule: "ati"
[ 48.705] (II) Loading /usr/lib64/xorg/modules/drivers/ati_drv.so
[ 48.715] (II) Module ati: vendor="X.Org Foundation"
[ 48.715] compiled for 1.14.2, module version = 7.2.0
[ 48.715] Module class: X.Org Video Driver
[ 48.715] ABI class: X.Org Video Driver, version 14.1
[ 48.715] (II) LoadModule: "radeon"
[ 48.715] (II) Loading /usr/lib64/xorg/modules/drivers/radeon_drv.so
[ 48.738] (II) Module radeon: vendor="X.Org Foundation"
[ 48.738] compiled for 1.14.2, module version = 7.2.0
[ 48.738] Module class: X.Org Video Driver
[ 48.738] ABI class: X.Org Video Driver, version 14.1
[ 48.738] (II) LoadModule: "vesa"
[ 48.739] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 48.746] (II) Module vesa: vendor="X.Org Foundation"
[ 48.746] compiled for 1.14.3, module version = 2.3.3
[ 48.746] Module class: X.Org Video Driver
[ 48.746] ABI class: X.Org Video Driver, version 14.1
[ 48.746] (II) LoadModule: "modesetting"
[ 48.746] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 48.753] (II) Module modesetting: vendor="X.Org Foundation"
[ 48.753] compiled for 1.14.2, module version = 0.8.0
[ 48.753] Module class: X.Org Video Driver
[ 48.753] ABI class: X.Org Video Driver, version 14.1
[ 48.753] (II) LoadModule: "fbdev"
[ 48.754] (WW) Warning, couldn't open module fbdev
[ 48.754] (II) UnloadModule: "fbdev"
[ 48.754] (II) Unloading fbdev
[ 48.754] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 48.754] (II) RADEON: Driver for ATI Radeon chipsets:

[ 48.759] (II) VESA: driver for VESA chipsets: vesa
[ 48.759] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 48.759] (++) using VT number 7

[ 48.776] (II) [KMS] Kernel modesetting enabled.
[ 48.776] (WW) Falling back to old probe method for vesa
[ 48.776] (WW) Falling back to old probe method for modesetting
[ 48.776] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 48.776] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 48.776] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 48.776] (==) RADEON(0): Default visual is TrueColor
[ 48.776] (==) RADEON(0): RGB weight 888
[ 48.776] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 48.776] (--) RADEON(0): Chipset: "ATI Radeon HD 3200 Graphics" (ChipID = 0x9610)
[ 48.776] (II) RADEON(0): GPU accel disabled or not working, using shadowfb for KMS
[ 48.776] (II) Loading sub module "shadow"
[ 48.776] (II) LoadModule: "shadow"
[ 48.776] (II) Loading /usr/lib64/xorg/modules/libshadow.so
[ 48.777] (II) Module shadow: vendor="X.Org Foundation"
[ 48.777] compiled for 1.14.3, module version = 1.1.0
[ 48.777] ABI class: X.Org ANSI C Emulation, version 0.4
[ 48.777] (II) RADEON(0): KMS Color Tiling: disabled
[ 48.777] (II) RADEON(0): KMS Color Tiling 2D: disabled
[ 48.777] (II) RADEON(0): KMS Pageflipping: enabled
[ 48.777] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 48.791] (II) RADEON(0): Output VGA-0 has no monitor section
[ 48.821] (II) RADEON(0): Output DVI-0 has no monitor section
[ 48.835] (II) RADEON(0): EDID for output VGA-0
[ 48.865] (II) RADEON(0): EDID for output DVI-0
[ 48.865] (II) RADEON(0): Manufacturer: HIQ Model: 91dd Serial#: 3568
[ 48.865] (II) RADEON(0): Year: 2004 Week: 51
[ 48.865] (II) RADEON(0): EDID Version: 1.3
[ 48.865] (II) RADEON(0): Digital Display Input
[ 48.865] (II) RADEON(0): Max Image Size [cm]: horiz.: 37 vert.: 30
[ 48.865] (II) RADEON(0): Gamma: 2.20
[ 48.865] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off
[ 48.865] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 48.865] (II) RADEON(0): First detailed timing is preferred mode
[ 48.865] (II) RADEON(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 48.865] (II) RADEON(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 48.865] (II) RADEON(0): Supported established timings:
[ 48.865] (II) RADEON(0): 640x480@60Hz
[ 48.865] (II) RADEON(0): 800x600@60Hz
[ 48.865] (II) RADEON(0): 1024x768@60Hz
[ 48.865] (II) RADEON(0): Manufacturer's mask: 0
[ 48.865] (II) RADEON(0): Supported standard timings:
[ 48.865] (II) RADEON(0): #0: hsize: 640 vsize 480 refresh: 60 vid: 16433
[ 48.865] (II) RADEON(0): #1: hsize: 800 vsize 600 refresh: 60 vid: 16453
[ 48.865] (II) RADEON(0): #2: hsize: 1024 vsize 768 refresh: 60 vid: 16481
[ 48.865] (II) RADEON(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 48.865] (II) RADEON(0): Supported detailed timing:
[ 48.865] (II) RADEON(0): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 48.865] (II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 48.865] (II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 48.865] (II) RADEON(0): Supported detailed timing:
[ 48.865] (II) RADEON(0): clock: 40.0 MHz Image Size: 376 x 301 mm
[ 48.865] (II) RADEON(0): h_active: 800 h_sync: 840 h_sync_end 968 h_blank_end 1056 h_border: 0
[ 48.865] (II) RADEON(0): v_active: 600 v_sync: 601 v_sync_end 605 v_blanking: 628 v_border: 0
[ 48.865] (II) RADEON(0): Ranges: V min: 59 V max: 61 Hz, H min: 31 H max: 67 kHz,
[ 48.865] (II) RADEON(0): Monitor name: L90D+ DVI
[ 48.865] (II) RADEON(0): EDID (in hex):
[ 48.865] (II) RADEON(0): 00ffffffffffff002131dd91f00d0000
[ 48.865] (II) RADEON(0): 330e010380251e78eaee95a3544c9926
[ 48.865] (II) RADEON(0): 0f505421080031404540614081800101
[ 48.865] (II) RADEON(0): 010101010101302a009851002a403070
[ 48.865] (II) RADEON(0): 1300782d1100001ea00f200031581c20
[ 48.865] (II) RADEON(0): 28801400782d1100001e000000fd003b
[ 48.865] (II) RADEON(0): 3d1f43ff000a202020202020000000fc
[ 48.865] (II) RADEON(0): 004c3930442b204456490a2020200059
[ 48.865] (II) RADEON(0): Printing probed modes for output DVI-0
[ 48.865] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 48.865] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 48.865] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 48.865] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 48.865] (II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 48.865] (II) RADEON(0): Output VGA-0 disconnected
[ 48.865] (II) RADEON(0): Output DVI-0 connected
[ 48.865] (II) RADEON(0): Using exact sizes for initial modes
[ 48.865] (II) RADEON(0): Output DVI-0 using initial mode 1280x1024
[ 48.865] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 48.865] (II) RADEON(0): mem size init: gart size :1fdef000 vram size: s:20000000 visible:fac0000
[ 48.866] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 48.866] (==) RADEON(0): DPI set to (96, 96)
[ 48.866] (II) Loading sub module "fb"
[ 48.866] (II) LoadModule: "fb"
[ 48.866] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 48.877] (II) Module fb: vendor="X.Org Foundation"
[ 48.878] compiled for 1.14.3, module version = 1.0.0
[ 48.878] ABI class: X.Org ANSI C Emulation, version 0.4
[ 48.878] (II) Loading sub module "ramdac"
[ 48.878] (II) LoadModule: "ramdac"
[ 48.878] (II) Module "ramdac" already built-in
[ 48.878] (II) UnloadModule: "vesa"
[ 48.878] (II) Unloading vesa
[ 48.878] (II) UnloadModule: "modesetting"
[ 48.878] (II) Unloading modesetting
[ 48.878] (--) Depth 24 pixmap format is 32 bpp
[ 48.878] (II) RADEON(0): Front buffer size: 5120K
[ 48.878] (II) RADEON(0): VRAM usage limit set to 226454K
[ 48.880] (==) RADEON(0): Backing store disabled
[ 48.880] (WW) RADEON(0): Direct rendering disabled
[ 48.880] (II) RADEON(0): Acceleration disabled
[ 48.880] (==) RADEON(0): DPMS enabled
[ 48.880] (==) RADEON(0): Silken mouse enabled
[ 48.880] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 48.886] (--) RandR disabled
[ 48.894] (II) AIGLX: Screen 0 is not DRI2 capable
[ 48.894] (II) AIGLX: Screen 0 is not DRI capable
[ 48.980] (II) AIGLX: Loaded and initialized swrast
[ 48.980] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 48.996] (II) RADEON(0): Setting screen physical size to 338 x 270
[ 49.416] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 49.416] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 49.416] (**) Power Button: Applying InputClass "keyboard-all"
[ 49.416] (II) LoadModule: "evdev"
[ 49.416] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 49.432] (II) Module evdev: vendor="X.Org Foundation"
[ 49.432] compiled for 1.14.3, module version = 2.8.2
[ 49.432] Module class: X.Org XInput Driver
[ 49.432] ABI class: X.Org XInput driver, version 19.1
[ 49.432] (II) Using input driver 'evdev' for 'Power Button'
[ 49.432] (**) Power Button: always reports core events
[ 49.432] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 49.432] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 49.432] (--) evdev: Power Button: Found keys
[ 49.432] (II) evdev: Power Button: Configuring as keyboard
[ 49.432] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 49.432] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 49.432] (**) Option "xkb_rules" "evdev"
[ 49.432] (**) Option "xkb_model" "pc104"
[ 49.432] (**) Option "xkb_layout" "us"
[ 49.432] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 49.475] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 49.475] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 49.475] (**) Power Button: Applying InputClass "keyboard-all"
[ 49.475] (II) Using input driver 'evdev' for 'Power Button'
[ 49.475] (**) Power Button: always reports core events
[ 49.475] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 49.475] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 49.475] (--) evdev: Power Button: Found keys
[ 49.475] (II) evdev: Power Button: Configuring as keyboard
[ 49.475] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 49.475] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 49.475] (**) Option "xkb_rules" "evdev"
[ 49.475] (**) Option "xkb_model" "pc104"
[ 49.475] (**) Option "xkb_layout" "us"
[ 49.475] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 49.475] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 49.476] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event12)
[ 49.476] (II) No input driver specified, ignoring this device.
[ 49.476] (II) This device may have been added with another device file.
[ 49.476] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event13)
[ 49.476] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 49.476] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 49.476] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 49.476] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event13"
[ 49.476] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc01b
[ 49.476] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 10 mouse buttons
[ 49.476] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 49.476] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 49.476] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 49.476] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 49.476] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 49.476] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 49.476] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 49.476] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb5/5-2/5-2:1.0/input/input13/event13"
[ 49.476] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 8)
[ 49.476] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 49.477] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 49.477] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 49.477] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 49.477] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 49.477] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 49.477] (II) No input driver specified, ignoring this device.
[ 49.477] (II) This device may have been added with another device file.
[ 49.477] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event10)
[ 49.477] (II) No input driver specified, ignoring this device.
[ 49.477] (II) This device may have been added with another device file.
[ 49.477] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event11)
[ 49.477] (II) No input driver specified, ignoring this device.
[ 49.477] (II) This device may have been added with another device file.
[ 49.477] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event4)
[ 49.477] (II) No input driver specified, ignoring this device.
[ 49.477] (II) This device may have been added with another device file.
[ 49.478] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event5)
[ 49.478] (II) No input driver specified, ignoring this device.
[ 49.478] (II) This device may have been added with another device file.
[ 49.478] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event6)
[ 49.478] (II) No input driver specified, ignoring this device.
[ 49.478] (II) This device may have been added with another device file.
[ 49.478] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event7)
[ 49.478] (II) No input driver specified, ignoring this device.
[ 49.478] (II) This device may have been added with another device file.
[ 49.478] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event8)
[ 49.478] (II) No input driver specified, ignoring this device.
[ 49.478] (II) This device may have been added with another device file.
[ 49.478] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event9)
[ 49.478] (II) No input driver specified, ignoring this device.
[ 49.478] (II) This device may have been added with another device file.
[ 49.479] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1)
[ 49.479] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 49.479] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard-all"
[ 49.479] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 49.479] (**) AT Translated Set 2 keyboard: always reports core events
[ 49.479] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event1"
[ 49.479] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 49.479] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 49.479] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 49.479] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input1/event1"
[ 49.479] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 49.479] (**) Option "xkb_rules" "evdev"
[ 49.479] (**) Option "xkb_model" "pc104"
[ 49.479] (**) Option "xkb_layout" "us"
[ 49.479] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 49.479] (II) config/udev: Adding input device Speakup (/dev/input/event0)
[ 49.480] (**) Speakup: Applying InputClass "evdev keyboard catchall"
[ 49.480] (**) Speakup: Applying InputClass "keyboard-all"
[ 49.480] (II) Using input driver 'evdev' for 'Speakup'
[ 49.480] (**) Speakup: always reports core events
[ 49.480] (**) evdev: Speakup: Device: "/dev/input/event0"
[ 49.480] (--) evdev: Speakup: Vendor 0 Product 0
[ 49.480] (--) evdev: Speakup: Found keys
[ 49.480] (II) evdev: Speakup: Configuring as keyboard
[ 49.480] (**) Option "config_info" "udev:/sys/devices/virtual/input/input0/event0"
[ 49.480] (II) XINPUT: Adding extended input device "Speakup" (type: KEYBOARD, id 10)
[ 49.480] (**) Option "xkb_rules" "evdev"
[ 49.480] (**) Option "xkb_model" "pc104"
[ 49.480] (**) Option "xkb_layout" "us"
[ 49.480] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 52.626] (II) RADEON(0): EDID vendor "HIQ", prod id 37341
[ 52.626] (II) RADEON(0): Using EDID range info for horizontal sync
[ 52.626] (II) RADEON(0): Using EDID range info for vertical refresh
[ 52.626] (II) RADEON(0): Printing DDC gathered Modelines:
[ 52.626] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 52.626] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 52.626] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 52.626] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 52.670] (II) RADEON(0): EDID vendor "HIQ", prod id 37341
[ 52.670] (II) RADEON(0): Using hsync ranges from config file
[ 52.670] (II) RADEON(0): Using vrefresh ranges from config file
[ 52.670] (II) RADEON(0): Printing DDC gathered Modelines:
[ 52.670] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 52.670] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 52.670] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 52.670] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 54.065] (II) RADEON(0): EDID vendor "HIQ", prod id 37341
[ 54.065] (II) RADEON(0): Using hsync ranges from config file
[ 54.065] (II) RADEON(0): Using vrefresh ranges from config file
[ 54.065] (II) RADEON(0): Printing DDC gathered Modelines:
[ 54.065] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 54.065] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 54.065] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 54.065] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 2721.112] (EE) RADEON(0): drmmode_crtc_dpms cannot get last vblank counter
[ 2721.113] (EE) RADEON(0): drmmode_crtc_dpms cannot get last vblank counter
[ 5290.951] (EE) RADEON(0): drmmode_crtc_dpms cannot get last vblank counter

adamk75 · 12-09-2013, 07:59 AM

OK, now please show the output of 'dmesg'

Adam

Linux.tar.gz · 12-09-2013, 08:29 AM

Here it is:

Quote:

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.17 (root@hive64) (gcc version 4.8.2 (GCC) ) #2 SMP Wed Oct 23 16:34:38 CDT 2013
[ 0.000000] Command line: BOOT_IMAGE=Linux ro root=801 vt.default_utf8=1
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000afddffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000afde0000-0x00000000afde2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000afde3000-0x00000000afdeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000afdf0000-0x00000000afdfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA78GM-S2H/GA-MA78GM-S2H, BIOS FA 09/19/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 0000A0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000AFE00000 mask FFFFFFE00000 uncachable
[ 0.000000] 4 base 000100000000 mask FFFF00000000 write-back
[ 0.000000] 5 base 000200000000 mask FFFFE0000000 write-back
[ 0.000000] 6 base 000220000000 mask FFFFF0000000 write-back
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000230000000 aka 8960M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xafe00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xafde0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f5820-0x000f582f] mapped at [ffff8800000f5820]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x0236f000, 0x0236ffff] PGTABLE
[ 0.000000] BRK [0x02370000, 0x02370fff] PGTABLE
[ 0.000000] BRK [0x02371000, 0x02371fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x22fe00000-0x22fffffff]
[ 0.000000] [mem 0x22fe00000-0x22fffffff] page 2M
[ 0.000000] BRK [0x02372000, 0x02372fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x22c000000-0x22fdfffff]
[ 0.000000] [mem 0x22c000000-0x22fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]
[ 0.000000] [mem 0x200000000-0x22bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xafddffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xafbfffff] page 2M
[ 0.000000] [mem 0xafc00000-0xafddffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] ACPI: RSDP 00000000000f71a0 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000afde3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000afde3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000afde30c0 06467 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000afde0000 00040
[ 0.000000] ACPI: SSDT 00000000afde9600 00544 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 00000000afde9b80 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000afde9bc0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC 00000000afde9540 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227e00000-ffff88022f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x22fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xafddffff]
[ 0.000000] node 0: [mem 0x100000000-0x22fffffff]
[ 0.000000] On node 0 totalpages: 1965438
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11192 pages used for memmap
[ 0.000000] DMA32 zone: 716256 pages, LIFO batch:31
[ 0.000000] Normal zone: 19456 pages used for memmap
[ 0.000000] Normal zone: 1245184 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000afde0000 - 00000000afde3000
[ 0.000000] PM: Registered nosave memory: 00000000afde3000 - 00000000afdf0000
[ 0.000000] PM: Registered nosave memory: 00000000afdf0000 - 00000000afe00000
[ 0.000000] PM: Registered nosave memory: 00000000afe00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] e820: [mem 0xafe00000-0xdfffffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88022fc00000 s79424 r8192 d22976 u524288
[ 0.000000] pcpu-alloc: s79424 r8192 d22976 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1934705
[ 0.000000] Kernel command line: BOOT_IMAGE=Linux ro root=801 vt.default_utf8=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 325a000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ a4000000
[ 0.000000] PM: Registered nosave memory: 00000000a4000000 - 00000000a8000000
[ 0.000000] Memory: 7574300k/9175040k available (11725k kernel code, 1313288k absent, 287452k reserved, 5712k data, 1272k init)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.001000] tsc: Fast TSC calibration using PIT
[ 0.002000] tsc: Detected 2204.711 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4409.42 BogoMIPS (lpj=2204711)
[ 0.000104] pid_max: default: 32768 minimum: 301
[ 0.000195] Security Framework initialized
[ 0.000257] Mount-cache hash table entries: 256
[ 0.000527] Initializing cgroup subsys devices
[ 0.000582] Initializing cgroup subsys freezer
[ 0.000636] Initializing cgroup subsys net_cls
[ 0.000690] Initializing cgroup subsys blkio
[ 0.000744] Initializing cgroup subsys perf_event
[ 0.000822] tseg: 00afe00000
[ 0.000827] CPU: Physical Processor ID: 0
[ 0.000874] CPU: Processor Core ID: 0
[ 0.000928] mce: CPU supports 6 MCE banks
[ 0.000980] LVT offset 0 assigned for vector 0xf9
[ 0.001035] process: using AMD E400 aware idle routine
[ 0.001091] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.001091] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
[ 0.001091] tlb_flushall_shift: 4
[ 0.001299] Freeing SMP alternatives: 36k freed
[ 0.001374] ACPI: Core revision 20130328
[ 0.004049] ACPI: All ACPI Tables successfully acquired
[ 0.032945] ftrace: allocating 36377 entries in 143 pages
[ 0.052100] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062157] smpboot: CPU0: AMD Phenom(tm) 9500 Quad-Core Processor (fam: 10, model: 02, stepping: 02)
[ 0.164040] Performance Events: AMD PMU driver.
[ 0.164129] ... version: 0
[ 0.164182] ... bit width: 48
[ 0.164228] ... generic registers: 4
[ 0.164281] ... value mask: 0000ffffffffffff
[ 0.164332] ... max period: 00007fffffffffff
[ 0.164379] ... fixed-purpose events: 0
[ 0.164431] ... event mask: 000000000000000f
[ 0.164706] MCE: In-kernel MCE decoding enabled.
[ 0.164842] smpboot: Booting Node 0, Processors #1 #2 #3 OK
[ 0.204477] Brought up 4 CPUs
[ 0.204525] smpboot: Total of 4 processors activated (17637.68 BogoMIPS)
[ 0.207180] devtmpfs: initialized
[ 0.209235] PM: Registering ACPI NVS region [mem 0xafde0000-0xafde2fff] (12288 bytes)
[ 0.209673] xor: measuring software checksum speed
[ 0.218969] prefetch64-sse: 9220.000 MB/sec
[ 0.228959] generic_sse: 8604.000 MB/sec
[ 0.229005] xor: using function: prefetch64-sse (9220.000 MB/sec)
[ 0.229057] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.229174] regulator-dummy: no parameters
[ 0.229294] NET: Registered protocol family 16
[ 0.229437] node 0 link 0: io port [a000, ffff]
[ 0.229441] TOM: 00000000d0000000 aka 3328M
[ 0.229496] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
[ 0.229498] node 0 link 0: mmio [a0000, bffff]
[ 0.229501] node 0 link 0: mmio [d0000000, fe02ffff] ==> [d0000000, dfffffff] and [e0100000, fe02ffff]
[ 0.229505] node 0 link 0: mmio [e0000000, efffffff] ==> [e0100000, efffffff]
[ 0.229508] TOM2: 0000000230000000 aka 8960M
[ 0.229561] bus: [bus 00-05] on node 0 link 0
[ 0.229563] bus: 00 [io 0x0000-0xffff]
[ 0.229564] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.229565] bus: 00 [mem 0xd0000000-0xdfffffff]
[ 0.229567] bus: 00 [mem 0xe0100000-0xffffffff]
[ 0.229568] bus: 00 [mem 0x230000000-0xfcffffffff]
[ 0.229614] ACPI: bus type PCI registered
[ 0.229669] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.229794] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.229860] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.240483] PCI: Using configuration type 1 for base access
[ 0.244222] bio: create slab <bio-0> at 0
[ 0.260944] raid6: sse2x1 2890 MB/s
[ 0.277909] raid6: sse2x2 4578 MB/s
[ 0.294900] raid6: sse2x4 5117 MB/s
[ 0.294947] raid6: using algorithm sse2x4 (5117 MB/s)
[ 0.295001] raid6: using intx1 recovery algorithm
[ 0.295108] ACPI: Added _OSI(Module Device)
[ 0.295161] ACPI: Added _OSI(Processor Device)
[ 0.295214] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.295267] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.295981] ACPI: EC: Look up EC in DSDT
[ 0.300526] ACPI: Interpreter enabled
[ 0.300594] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
[ 0.300730] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
[ 0.300877] ACPI: (supports S0 S3 S4 S5)
[ 0.300927] ACPI: Using IOAPIC for interrupt routing
[ 0.301056] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.301214] ACPI: No dock devices found.
[ 0.341218] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.341500] PCI host bridge to bus 0000:00
[ 0.341550] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.341605] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.341653] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.341706] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.342259] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.342312] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xfebfffff]
[ 0.342379] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
[ 0.342394] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.342497] pci 0000:00:01.0: [1022:9602] type 01 class 0x060400
[ 0.342587] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
[ 0.342624] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.342672] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.342757] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
[ 0.342792] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.342840] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.342923] pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400
[ 0.342958] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.343005] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 0.343103] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.343123] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
[ 0.343133] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
[ 0.343143] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
[ 0.343153] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.343163] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.343173] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.343286] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.343300] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 0.343399] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.343481] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[ 0.343495] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 0.343594] pci 0000:00:12.1: System wakeup disabled by ACPI
[ 0.343679] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.343699] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
[ 0.343784] pci 0000:00:12.2: supports D1 D2
[ 0.343786] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.343836] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.343921] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.343935] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
[ 0.344034] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.344116] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[ 0.344130] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.344231] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 0.344318] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.344338] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
[ 0.344423] pci 0000:00:13.2: supports D1 D2
[ 0.344425] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.344476] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.344568] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.344725] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.344742] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.344752] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.344762] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.344771] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.344781] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
[ 0.344898] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.344920] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.344989] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.345038] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.345121] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.345254] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.345332] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.345420] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.345434] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
[ 0.345532] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.345617] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.345688] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.345754] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.345822] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.345893] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.346007] pci 0000:01:05.0: [1002:9610] type 00 class 0x030000
[ 0.346015] pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[ 0.346020] pci 0000:01:05.0: reg 14: [io 0xce00-0xceff]
[ 0.346025] pci 0000:01:05.0: reg 18: [mem 0xfdae0000-0xfdaeffff]
[ 0.346035] pci 0000:01:05.0: reg 24: [mem 0xfd900000-0xfd9fffff]
[ 0.346053] pci 0000:01:05.0: supports D1 D2
[ 0.346080] pci 0000:01:05.1: [1002:960f] type 00 class 0x040300
[ 0.346088] pci 0000:01:05.1: reg 10: [mem 0xfdafc000-0xfdafffff]
[ 0.346120] pci 0000:01:05.1: supports D1 D2
[ 0.346177] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.346234] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.346237] pci 0000:00:01.0: bridge window [mem 0xfd900000-0xfdafffff]
[ 0.346241] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.346300] pci 0000:02:00.0: [10ee:3fc5] type 00 class 0x040100
[ 0.346319] pci 0000:02:00.0: reg 10: [mem 0xfd4f0000-0xfd4fffff]
[ 0.347861] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.347919] pci 0000:00:02.0: bridge window [io 0xb000-0xbfff]
[ 0.347922] pci 0000:00:02.0: bridge window [mem 0xfd400000-0xfd4fffff]
[ 0.347926] pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.347991] pci 0000:03:00.0: [1912:0014] type 00 class 0x0c0330
[ 0.348021] pci 0000:03:00.0: reg 10: [mem 0xfdefe000-0xfdefffff 64bit]
[ 0.348174] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold

Linux.tar.gz · 12-09-2013, 08:30 AM

Followed by:

Quote:

[ 0.349859] pci 0000:00:04.0: PCI bridge to [bus 03]
[ 0.349917] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
[ 0.349920] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.349924] pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.349972] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.349985] pci 0000:04:00.0: reg 10: [io 0xde00-0xdeff]
[ 0.350006] pci 0000:04:00.0: reg 18: [mem 0xfdbff000-0xfdbfffff 64bit pref]
[ 0.350020] pci 0000:04:00.0: reg 20: [mem 0xfdbe0000-0xfdbeffff 64bit pref]
[ 0.350029] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.350077] pci 0000:04:00.0: supports D1 D2
[ 0.350079] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.351852] pci 0000:00:0a.0: PCI bridge to [bus 04]
[ 0.351902] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.351912] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.351916] pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.351965] pci 0000:05:07.0: [8086:1229] type 00 class 0x020000
[ 0.351987] pci 0000:05:07.0: reg 10: [mem 0xfd8ff000-0xfd8fffff]
[ 0.351999] pci 0000:05:07.0: reg 14: [io 0xaf00-0xaf3f]
[ 0.352012] pci 0000:05:07.0: reg 18: [mem 0xfd700000-0xfd7fffff]
[ 0.352055] pci 0000:05:07.0: reg 30: [mem 0x00000000-0x000fffff pref]
[ 0.352090] pci 0000:05:07.0: supports D1 D2
[ 0.352092] pci 0000:05:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.352147] pci 0000:05:0e.0: [104c:8024] type 00 class 0x0c0010
[ 0.352171] pci 0000:05:0e.0: reg 10: [mem 0xfd8fe000-0xfd8fe7ff]
[ 0.352184] pci 0000:05:0e.0: reg 14: [mem 0xfd8f8000-0xfd8fbfff]
[ 0.352278] pci 0000:05:0e.0: supports D1 D2
[ 0.352280] pci 0000:05:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.352341] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
[ 0.352400] pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
[ 0.352404] pci 0000:00:14.4: bridge window [mem 0xfd600000-0xfd8fffff]
[ 0.352409] pci 0000:00:14.4: bridge window [mem 0xfd500000-0xfd5fffff pref]
[ 0.352411] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.352413] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.352415] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.352417] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.352420] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
[ 0.352434] pci_bus 0000:00: on NUMA node 0
[ 0.352437] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.352511] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.363893] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.364322] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.364746] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.365167] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.365591] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.366012] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.366430] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.366850] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.367729] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.367761] Found 1 acpi root devices
[ 0.367852] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.367918] vgaarb: loaded
[ 0.367970] vgaarb: bridge control possible 0000:01:05.0
[ 0.368093] SCSI subsystem initialized
[ 0.368147] ACPI: bus type ATA registered
[ 0.368259] libata version 3.00 loaded.
[ 0.368265] ACPI: bus type USB registered
[ 0.368345] usbcore: registered new interface driver usbfs
[ 0.368408] usbcore: registered new interface driver hub
[ 0.368482] usbcore: registered new device driver usb
[ 0.368646] PCI: Using ACPI for IRQ routing
[ 0.377428] PCI: pci_cache_line_size set to 64 bytes
[ 0.377437] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 0.377571] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.377573] e820: reserve RAM buffer [mem 0xafde0000-0xafffffff]
[ 0.377719] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.377909] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.379994] Switching to clocksource hpet
[ 0.385919] pnp: PnP ACPI init
[ 0.385996] ACPI: bus type PNP registered
[ 0.386183] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.386239] system 00:00: [io 0x0220-0x0225] has been reserved
[ 0.386294] system 00:00: [io 0x0290-0x0294] has been reserved
[ 0.386351] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.406127] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.406227] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:04:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[ 0.406305] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:05:07.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[ 0.406395] system 00:01: [io 0x4100-0x411f] has been reserved
[ 0.406450] system 00:01: [io 0x0228-0x022f] has been reserved
[ 0.406504] system 00:01: [io 0x0238-0x023f] has been reserved
[ 0.406551] system 00:01: [io 0x040b] has been reserved
[ 0.406605] system 00:01: [io 0x04d6] has been reserved
[ 0.406658] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.406710] system 00:01: [io 0x0c14] has been reserved
[ 0.406769] system 00:01: [io 0x0c50-0x0c52] has been reserved
[ 0.406816] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
[ 0.406875] system 00:01: [io 0x0c6f] has been reserved
[ 0.406922] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.406974] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.407027] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
[ 0.407086] system 00:01: [io 0x4000-0x40fe] has been reserved
[ 0.407140] system 00:01: [io 0x4210-0x4217] has been reserved
[ 0.407188] system 00:01: [io 0x0b00-0x0b0f] has been reserved
[ 0.407248] system 00:01: [io 0x0b10-0x0b1f] has been reserved
[ 0.407295] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.407349] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.407425] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.407527] pnp 00:02: [dma 4]
[ 0.407547] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.407630] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.407675] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.407698] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.407729] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.407883] pnp 00:07: [dma 2]
[ 0.407917] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.408148] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.408373] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.408498] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.408555] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.408611] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.408758] pnp 00:0c: disabling [mem 0x000d3a00-0x000d3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.408829] pnp 00:0c: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.408897] pnp 00:0c: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.408973] pnp 00:0c: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.409048] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.409124] pnp 00:0c: disabling [mem 0x00100000-0xafddffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.409219] pnp 00:0c: disabling [mem 0x000d3a00-0x000d3fff disabled] because it overlaps 0000:05:07.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[ 0.409288] pnp 00:0c: disabling [mem 0x000f0000-0x000f7fff disabled] because it overlaps 0000:05:07.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[ 0.409368] pnp 00:0c: disabling [mem 0x000f8000-0x000fbfff disabled] because it overlaps 0000:05:07.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[ 0.409439] pnp 00:0c: disabling [mem 0x000fc000-0x000fffff disabled] because it overlaps 0000:05:07.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[ 0.409513] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff disabled] because it overlaps 0000:05:07.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[ 0.409607] system 00:0c: [mem 0xafde0000-0xafdfffff] could not be reserved
[ 0.409663] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.409719] system 00:0c: [mem 0xafef0000-0xcfeeffff] could not be reserved
[ 0.409773] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.409828] system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.409877] system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.409936] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.409956] pnp: PnP ACPI: found 13 devices
[ 0.410003] ACPI: bus type PNP unregistered
[ 0.416659] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.416716] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.416768] pci 0000:00:01.0: bridge window [mem 0xfd900000-0xfdafffff]
[ 0.416825] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.416897] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.416945] pci 0000:00:02.0: bridge window [io 0xb000-0xbfff]
[ 0.417001] pci 0000:00:02.0: bridge window [mem 0xfd400000-0xfd4fffff]
[ 0.417068] pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.417142] pci 0000:00:04.0: PCI bridge to [bus 03]
[ 0.417197] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
[ 0.417253] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.417308] pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.417382] pci 0000:04:00.0: BAR 6: assigned [mem 0xfdb00000-0xfdb0ffff pref]
[ 0.417458] pci 0000:00:0a.0: PCI bridge to [bus 04]
[ 0.417513] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.417567] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.417616] pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.417696] pci 0000:05:07.0: BAR 6: assigned [mem 0xfd500000-0xfd5fffff pref]
[ 0.417763] pci 0000:00:14.4: PCI bridge to [bus 05]
[ 0.417817] pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
[ 0.417869] pci 0000:00:14.4: bridge window [mem 0xfd600000-0xfd8fffff]
[ 0.417919] pci 0000:00:14.4: bridge window [mem 0xfd500000-0xfd5fffff pref]
[ 0.418393] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.418395] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.418398] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.418400] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.418402] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
[ 0.418404] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.418406] pci_bus 0000:01: resource 1 [mem 0xfd900000-0xfdafffff]
[ 0.418409] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.418411] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
[ 0.418413] pci_bus 0000:02: resource 1 [mem 0xfd400000-0xfd4fffff]
[ 0.418416] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.418418] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.418420] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.418422] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.418424] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.418426] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.418428] pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.418431] pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
[ 0.418433] pci_bus 0000:05: resource 1 [mem 0xfd600000-0xfd8fffff]
[ 0.418435] pci_bus 0000:05: resource 2 [mem 0xfd500000-0xfd5fffff pref]
[ 0.418437] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.418439] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.418441] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.418443] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.418445] pci_bus 0000:05: resource 8 [mem 0xcff00000-0xfebfffff]
[ 0.418486] NET: Registered protocol family 2
[ 0.418716] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.419191] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.419600] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.419707] TCP: reno registered
[ 0.419760] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.419871] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.420073] NET: Registered protocol family 1
[ 0.420227] RPC: Registered named UNIX socket transport module.
[ 0.420281] RPC: Registered udp transport module.
[ 0.420334] RPC: Registered tcp transport module.
[ 0.420387] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.420447] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.765831] pci 0000:01:05.0: Boot video device
[ 0.765943] pci 0000:05:07.0: Firmware left e100 interrupts enabled; disabling
[ 0.766031] PCI: CLS 4 bytes, default 64
[ 0.766096] PCI-DMA: Disabling AGP.
[ 0.766282] PCI-DMA: aperture base @ a4000000 size 65536 KB
[ 0.766337] PCI-DMA: using GART IOMMU.
[ 0.766392] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.771038] LVT offset 1 assigned for vector 0x400
[ 0.771108] IBS: LVT offset 1 assigned
[ 0.771194] perf: AMD IBS detected (0x00000007)
[ 0.772038] audit: initializing netlink socket (disabled)
[ 0.772112] type=2000 audit(1386589749.634:1): initialized
[ 0.774007] VFS: Disk quotas dquot_6.5.2
[ 0.774116] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.774940] NFS: Registering the id_resolver key type
[ 0.775015] Key type id_resolver registered
[ 0.775069] Key type id_legacy registered
[ 0.775126] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.775284] NTFS driver 2.1.30 [Flags: R/W].
[ 0.775388] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.775532] JFS: nTxBlock = 8192, nTxLock = 65536
[ 0.778736] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[ 0.779236] OCFS2 1.5.0
[ 0.779407] ocfs2: Registered cluster interface o2cb
[ 0.779461] OCFS2 DLMFS 1.5.0
[ 0.779579] OCFS2 User DLM kernel interface loaded
[ 0.779636] OCFS2 Node Manager 1.5.0
[ 0.779820] OCFS2 DLM 1.5.0
[ 0.780020] bio: create slab <bio-1> at 1
[ 0.780230] Btrfs loaded
[ 0.780290] msgmni has been set to 14922
[ 0.781826] async_tx: api initialized (async)
[ 0.781956] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.782073] io scheduler noop registered
[ 0.782127] io scheduler deadline registered
[ 0.782189] io scheduler cfq registered (default)
[ 0.782363] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.782419] pcieport 0000:00:04.0: irq 41 for MSI/MSI-X
[ 0.782462] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
[ 0.782530] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.782708] GHES: HEST is not enabled!

[ 1.656234] devtmpfs: mounted
[ 1.657634] Freeing unused kernel memory: 1272k freed
[ 1.658298] Write protecting the kernel read-only data: 16384k
[ 1.659954] Freeing unused kernel memory: 552k freed
[ 1.662278] Freeing unused kernel memory: 792k freed
[ 1.770709] tsc: Refined TSC clocksource calibration: 2204.694 MHz
[ 1.770769] Switching to clocksource tsc
[ 2.481335] loop: module loaded
[ 2.631686] udevd[181]: starting version 182
[ 3.323936] parport_pc 00:09: reported by Plug and Play ACPI
[ 3.324065] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 3.427760] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 3.427841] ACPI: Power Button [PWRB]
[ 3.427960] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.428035] ACPI: Power Button [PWRF]

[ 4.015877] hub 9-0:1.0: USB hub found
[ 4.015930] hub 9-0:1.0: 2 ports detected
[ 4.016084] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20130328/utaddress-251)
[ 4.016216] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.016508] firewire_ohci 0000:05:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 4.076721] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 4.076855] sp5100_tco: PCI Revision ID: 0x3a
[ 4.076923] sp5100_tco: failed to find MMIO address, giving up.
[ 4.149897] kvm: Nested Virtualization enabled
[ 4.149958] kvm: Nested Paging enabled
[ 4.160025] acpi-cpufreq: overriding BIOS provided _PSD data
[ 4.333137] usb 3-6: new high-speed USB device number 4 using ehci-pci
[ 4.349899] [drm] Initialized drm 1.1.0 20060810
[ 4.423973] hda_intel: position_fix set to 1 for device 1458:a022
[ 4.459715] usb 3-6: New USB device found, idVendor=5453, idProduct=5038
[ 4.459774] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.459825] usb 3-6: Product: TS-RDP8
[ 4.459875] usb 3-6: Manufacturer: Transcend
[ 4.459924] usb 3-6: SerialNumber: RDP800000000
[ 4.517061] firewire_core 0000:05:0e.0: created device fw0: GUID 007d60c800001fd0, S400
[ 4.560863] [drm] radeon kernel modesetting enabled.
[ 4.561264] [drm] initializing kernel modesetting (RS780 0x1002:0x9610 0x1458:0xD000).
[ 4.561358] [drm] register mmio base: 0xFDAE0000
[ 4.561412] [drm] register mmio size: 65536
[ 4.561798] ATOM BIOS: B27722
[ 4.561871] radeon 0000:01:05.0: VRAM: 512M 0x00000000C0000000 - 0x00000000DFFFFFFF (512M used)
[ 4.561952] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 4.564184] [drm] Detected VRAM RAM=512M, BAR=256M
[ 4.564251] [drm] RAM width 32bits DDR
[ 4.564417] [TTM] Zone kernel: Available graphics memory: 3821452 kiB
[ 4.564474] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 4.564529] [TTM] Initializing pool allocator
[ 4.564588] [TTM] Initializing DMA pool allocator
[ 4.564677] [drm] radeon: 512M of VRAM memory ready
[ 4.564731] [drm] radeon: 512M of GTT memory ready.
[ 4.564813] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 4.574791] [drm] Loading RS780 Microcode
[ 4.574902] r600_cp: Failed to load firmware "radeon/RS780_pfp.bin"
[ 4.574953] [drm:r600_startup] *ERROR* Failed to load firmware!
[ 4.575004] radeon 0000:01:05.0: disabling GPU acceleration
[ 4.576167] radeon 0000:01:05.0: ffff88022152e800 unpin not necessary
[ 4.576223] radeon 0000:01:05.0: ffff88022152e800 unpin not necessary
[ 4.576463] [drm] Radeon Display Connectors
[ 4.576521] [drm] Connector 0:
[ 4.576574] [drm] VGA-1
[ 4.576628] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 4.576699] [drm] Encoders:
[ 4.576752] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 4.576806] [drm] Connector 1:
[ 4.576852] [drm] DVI-D-1
[ 4.576916] [drm] HPD1
[ 4.576968] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 4.577034] [drm] Encoders:
[ 4.577087] [drm] DFP1: INTERNAL_KLDSCP_LVTMA
[ 4.577162] [drm] radeon: power management initialized
[ 4.629631] [drm] fb mappable at 0xD0040000
[ 4.629705] [drm] vram apper at 0xD0000000
[ 4.629768] [drm] size 5242880
[ 4.629831] [drm] fb depth is 24
[ 4.629894] [drm] pitch is 5120
[ 4.630028] fbcon: radeondrmfb (fb0) is primary device
[ 4.633225] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[ 4.633317] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 4.633379] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 4.633438] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 4.633500] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 4.633558] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 4.633617] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 4.633672] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 4.642500] Console: switching to colour frame buffer device 160x64
[ 4.648920] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[ 4.648971] radeon 0000:01:05.0: registered panic notifier
[ 4.649023] [drm] Initialized radeon 2.33.0 20080528 for 0000:01:05.0 on minor 0
[ 4.649243] snd_hda_intel 0000:01:05.1: setting latency timer to 64
[ 4.728730] i2c /dev entries driver
[ 4.758193] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input12

[ 35.408811] it87: Found IT8718F chip at 0x228, revision 5
[ 35.408835] it87: Beeping is supported
[ 58.416905] NET: Registered protocol family 10

adamk75 · 12-09-2013, 08:36 AM

Well the error is pretty clear:

Code:


[ 4.574902] r600_cp: Failed to load firmware "radeon/RS780_pfp.bin"
[ 4.574953] [drm:r600_startup] *ERROR* Failed to load firmware!

Switching to multilib should definitely not have that impact, so you did quite a number to your system. Does that file exist anywhere on your system? Is this a custom kernel?

Linux.tar.gz · 12-09-2013, 08:45 AM

Nice catch !
I think i may have compiled a test kernel just to see the time it takes on a "new" PC, but without actually installing it.

I wonder if it's linked to the missing lGL i have on some compilations.

adamk75 · 12-09-2013, 08:58 AM

If it's complaining about a missing GL library when compiling, you have a separate issue from the firmware problem, and both will impact your ability to have graphics acceleration.

For the missing GL library, reinstall the mesa package. As for the missing firmware.... Not sure what to tell you there. It should be installed in /lib/firmware/radeon/. Does that directory exist, and is the firmware there?

Adam

Linux.tar.gz · 12-09-2013, 09:06 AM

That's weird, /lib/firmware were empty although /var/log/package reported it was installed.

I don't recall doing fancy stuff, as my installation is recent.

Anyway, this playback problem is fixed, and i thank you all for helping me.