-   Slackware (
-   -   14.0 rc3 syslog and udev RUN+= (

StreamThreader 08-28-2012 10:59 AM

14.0 rc3 syslog and udev RUN+=
I upgrade 13.37 to 14.0 rc3 today.
And found some strange message in syslog
Aug 28 13:04:52 router udevd[1481]: IMPORT{} type missing, ignoring IMPORT /lib/udev/rules.d/79-fstab_import.rules:1
Aug 28 13:04:52 router udevd[1481]: RUN+="socket:..." support will be removed from a future udev release. Please remove it from: /lib/udev/rules.d/90-hal.rules:2 and use libudev to subscribe to events.
Aug 28 13:04:53 router udevd[1501]: could not find module by name='rtc_cmos'

This is normal, or need some edit or adjust system?

jtsn 08-28-2012 11:37 AM

This is normal, udev is systemd now and ts is supposed to break everything.

wadsworth 08-28-2012 12:11 PM

I think this bit from CHANGES_AND_HINTS.TXT would fix your "rtc_cmos" message.

If you are upgrading (as opposed to a new install), there are some stale files
in /etc/modprobe.d/ that you will need to remove: blacklist.conf,
bluetooth.conf, isapnp.conf, psmouse.conf, and usb-controller.conf
See /etc/modprobe.d/README for a more detailed explanation.

Woodsman 08-28-2012 01:13 PM

I have seen the udev message too, or something similar. I'm unsure, but I think the cause is a remnant rc.hald script on the system.

Woodsman 01-28-2013 11:01 PM

Although the thread is a tad old, I ran across this recently after I began updating another system. To resolve the problem, open /etc/modprobe.d/isapnp.conf with a text editor and comment out the following:

alias acpi:PNP0B00: rtc-cmos

ponce 01-28-2013 11:43 PM

I think that's because you still have files in /etc/modprobe.d/: this folder, from 14.0 on, should start empty and contain just the customizations that override the configurations in the default scanned folder, /lib/modprobe.d/ (in /lib/modprobe.d/isapnp.conf that line is already commented out ;) ).

All times are GMT -5. The time now is 11:41 AM.