| Holering |
08-27-2013 11:28 PM |
SlackBuild for Mesa-9.2.0-rc2 and
HOW TO GET HARDWARE ACCELERATION FOR RADEON HD 7750! (see below)
After installing glamor-egl and updating Mesa, you may have to rebuild and reinstall xorg and the xf86-video-ati driver (see below on enabling --enable-glamor for the driver). Also, I can't confirm if you need llvm rebuilt with the --enable-r600-llvm-compiler option; you may or may not, so beware as I had my package of llvm built with that option.
Glamor egl slackbuild script (modified from some other slackbuild in l directory)
Link to required patch (right-click and save-as) http://www.linuxfromscratch.org/patc...-fixes-1.patch
Link to glamor-egl! http://anduin.linuxfromscratch.org/s...l-0.5.0.tar.xz
Code:
#!/bin/sh
# Copyright 2008, 2009, 2010, 2011 Patrick J. Volkerding, Sebeka, Minnesota, USA
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
PKGNAM=glamor-egl
VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
BUILD=${BUILD:-1}
# Automatically determine the architecture we're building on:
if [ -z "$ARCH" ]; then
case "$( uname -m )" in
i?86) export ARCH=i486 ;;
arm*) export ARCH=arm ;;
# Unless $ARCH is already set, use uname -m for all other archs:
*) export ARCH=$( uname -m ) ;;
esac
fi
NUMJOBS=${NUMJOBS:-" -j7 "}
CWD=$(pwd)
TMP=${TMP:-/tmp}
PKG=$TMP/package-glamor-egl
if [ "$ARCH" = "i486" ]; then
SLKCFLAGS="-O2 -march=i486 -mtune=i686"
# SLKCFLAGS="$CFLAGS"
LIBDIRSUFFIX=""
elif [ "$ARCH" = "x86_64" ]; then
SLKCFLAGS="-O2 -pipe -fPIC"
# SLKCFLAGS="$CFLAGS"
LIBDIRSUFFIX="64"
else
SLKCFLAGS="-O2"
LIBDIRSUFFIX=""
fi
rm -rf $PKG
mkdir -p $TMP $PKG
cd $TMP
rm -rf glamor-egl-$VERSION
tar xvf $CWD/glamor-egl-$VERSION.tar.xz
cd glamor-egl-$VERSION
chown -R root:root .
find . \
\( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-exec chmod 755 {} \; -o \
\( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-exec chmod 644 {} \;
# Patch from LFS
patch -Np1 -i $CWD/glamor-egl-0.5.0-fixes-1.patch
autoreconf -fi
sh autogen.sh
CFLAGS="$SLKCFLAGS" \
CXXFLAGS="$SLKCFLAGS" \
./configure \
--prefix=/usr \
--libdir=/usr/lib${LIBDIRSUFFIX} \
--build=$ARCH-slackware-linux
make $NUMJOBS || make || exit 1
make install DESTDIR=$PKG || exit 1
find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
| cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
mv $PKG/usr/share/man $PKG/usr
gzip -9 $PKG/usr/man/man?/*.?
mv $PKG/usr/share/doc $PKG/usr
cp -a \
AUTHORS COPYING* README* TODO \
$PKG/usr/doc/glamor-egl-$VERSION
mkdir -p $PKG/install
cat $CWD/slack-desc > $PKG/install/slack-desc
cd $PKG
/sbin/makepkg -l y -c n $TMP/glamor-egl-$VERSION-$ARCH-$BUILD.txz
Now you can enable glamor in the slackware sources x/x11/configure/configure file after installing glamor (from above script) by adding: . (For some weird reason I couldn't build some xorg packages with the default script until I added --disable-xmlto in x/x11/configure/configure. Maybe you won't have that problem but who knows). You should probably rebuild xorg and the driver after you're done with Mesa (either in the next script or the last one were I managed to get 3D acceleration working on my cape verde GPU). Better yet, you should rebuild all packages dependent on Mesa (someone should write a script to check package dependencies and automate package rebuilding from slackware source directory).
Modified slackbuild for Mesa-9.2.0-rc2
Link to Mesa-9.2.0-rc2! ftp://ftp.freedesktop.org/pub/mesa/9...-9.2.0-rc2.zip
Code:
#!/bin/sh
# Copyright 2006, 2007, 2008, 2009, 2010, 2011, 2013 Patrick J. Volkerding, Sebeka, MN, USA
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
PKGNAM=mesa
VERSION=9.2.0-rc2
DEMOVERS=8.1.0
BUILD=${BUILD:-1}
NUMJOBS=${NUMJOBS:--j7}
# Be sure this list is up-to-date:
#DRI_DRIVERS="i915,i965,intel,nouveau,r200,radeon,swrast"
DRI_DRIVERS="i915,i965,intel,nouveau,r200,radeon"
if [ -z "$ARCH" ]; then
case "$( uname -m )" in
i?86) export ARCH=i486 ;;
arm*) export ARCH=arm ;;
*) export ARCH=$( uname -m ) ;;
esac
fi
CWD=$(pwd)
TMP=${TMP:-/tmp}
PKG=$TMP/package-mesa
if [ "$ARCH" = "i486" ]; then
SLKCFLAGS="-O2 -march=i486 -mtune=i686"
# SLKCFLAGS="$CFLAGS"
LIBDIRSUFFIX=""
elif [ "$ARCH" = "x86_64" ]; then
SLKCFLAGS="-O2 -pipe -fPIC"
# SLKCFLAGS="$CFLAGS"
LIBDIRSUFFIX="64"
else
SLKCFLAGS="-O2"
LIBDIRSUFFIX=""
fi
rm -rf $PKG
mkdir -p $TMP $PKG
cd $TMP
rm -rf Mesa-${VERSION}
#tar xvf $CWD/MesaLib-${VERSION}.tar.?z* || exit 1
unzip $CWD/MesaLib-${VERSION}.zip || exit 1
cd Mesa-$VERSION
# Let's kill the warning about operating on a dangling symlink:
rm -f src/gallium/state_trackers/d3d1x/w32api
# Make sure ownerships and permissions are sane:
chown -R root:root .
find . \
\( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-exec chmod 755 {} \; -o \
\( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-exec chmod 644 {} \;
# Apply patches from git (and maybe elsewhere):
# Patches obtained by:
git checkout origin/8.0
git format-patch 3d657b14b4cab98a2945904823e78cd8950944f4.. # 8.0.3 release
if /bin/ls $CWD/patches/*.patch 1> /dev/null 2> /dev/null ; then
for patch in $CWD/patches/*.patch ; do
patch -p1 < $patch || exit 1 ;
done
fi
if [ ! -r configure ]; then
autoreconf || exit 1
fi
# Fix llvm build problem with Mesa 9.1.6
#patch -Np1 -i $CWD/MesaLib-9.1.6-llvm_fixes-1.patch
# Ignore llvm r300 requirement
#patch -Np1 -i $CWD/mesa-9.2-dont-require-llvm-for-r300.patch
# Fix building with LLVM 3.3 (Courtesy of LFS)
sed -i "/LLVM_VERSION_INT/s:-ne:-lt:" configure.ac
# Running autogen to avoid problems if our autotools don't match upstream's:
./autogen.sh
# Optional configure options listed here:
# --enable-opencl \
# --enable-openvg \
# --enable-r600-llvm-compiler \
CFLAGS="$SLKCFLAGS" \
./configure \
--prefix=/usr \
--sysconfdir=/etc \
--libdir=/usr/lib${LIBDIRSUFFIX} \
--mandir=/usr/man \
--docdir=/usr/doc/mesa-$VERSION \
--disable-gallium-llvm \
--with-gallium-drivers=nouveau,r300,r600,radeonsi,svga \
--enable-gbm \
--enable-gallium-gbm \
--enable-xorg \
--enable-xa \
--enable-glx-tls \
--enable-osmesa \
--enable-texture-float \
--enable-shared-glapi \
--with-dri-drivers="$DRI_DRIVERS" \
--with-dri-driverdir=/usr/lib${LIBDIRSUFFIX}/xorg/modules/dri \
--build=$ARCH-slackware-linux
# r300 requires llvm
# Other gallium drivers:
# galahad,i915,identity,llvmpipe,noop,nv50,nvc0,nvfx,rbug,softpipe,svga,trace
make $NUMJOBS || make || exit 1
make install DESTDIR=$PKG || exit 1
# Now install the demos
( cd $TMP
rm -rf mesa-demos-$DEMOVERS
tar xvf $CWD/mesa-demos-$DEMOVERS.tar.?z* || exit 1
cd mesa-demos-$DEMOVERS
chown -R root:root .
find . \
\( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-exec chmod 755 {} \; -o \
\( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-exec chmod 644 {} \;
CFLAGS="$SLKCFLAGS" \
./configure \
--prefix=/usr \
--libdir=/usr/lib${LIBDIRSUFFIX} \
--build=$ARCH-slackware-linux
# Build and install gears and glinfo, as well as a few other demos
make -C src/demos gears glinfo
make -C src/xdemos \
glthreads glxcontexts glxdemo glxgears glxgears_fbconfig \
glxheads glxinfo glxpbdemo glxpixmap
mkdir -p $PKG/usr/bin
cp -a src/demos/{gears,glinfo} $PKG/usr/bin
for i in glthreads glxcontexts glxdemo glxgears glxgears_fbconfig \
glxheads glxinfo glxpbdemo glxpixmap ; do
cp -a src/xdemos/$i $PKG/usr/bin ;
done
)
# Strip binaries:
find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
| cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
find $PKG/usr/man -type f -exec gzip -9 {} \;
for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
# Compress info files, if any:
if [ -d $PKG/usr/info ]; then
rm -f $PKG/usr/info/dir
gzip -9 $PKG/usr/info/*
fi
mkdir -p $PKG/usr/doc/Mesa-$VERSION/html
cp -a \
docs/COPYING* docs/relnotes-${VERSION}*.html docs/README* docs/GL* \
$PKG/usr/doc/Mesa-$VERSION
cp -a docs/*.html $PKG/usr/doc/Mesa-$VERSION/html
rm -f $PKG/usr/doc/Mesa-$VERSION/html/relnotes*.html
mkdir -p $PKG/install
cat $CWD/slack-desc > $PKG/install/slack-desc
cd $PKG
/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
Disabled swrast since I experienced problems with omp_get_thread_num using gcc-4.7.3. Could've been my CFLAGS but not quite sure. Also couldn't use llvm compiler for RadeonSI driver. You can remove radeonsi in the "with-gallium-drivers=" option and re-enable the llvm compiler option.
After further testing I got hardware acceleration working on my hd 7750 (cape verde)! Funnily enough, I was enabling all the options for llvm and proper cape verde support but got bad results (only software acceleration worked). Ended up using the most basic Mesa build options and it worked! Don't know if radeonsi driver is better but I only got software acceleration results trying to build it. This should work on all other new ati hd 7xxx gpus. Here's what the script looks like.
Code:
#!/bin/sh
# Copyright 2006, 2007, 2008, 2009, 2010, 2011, 2013 Patrick J. Volkerding, Sebeka, MN, USA
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
PKGNAM=mesa
VERSION=9.2.0-rc2
DEMOVERS=8.1.0
BUILD=${BUILD:-1}
NUMJOBS=${NUMJOBS:--j7}
# Be sure this list is up-to-date:
#DRI_DRIVERS="i915,i965,intel,nouveau,r200,radeon,swrast"
DRI_DRIVERS="radeon"
if [ -z "$ARCH" ]; then
case "$( uname -m )" in
i?86) export ARCH=i486 ;;
arm*) export ARCH=arm ;;
*) export ARCH=$( uname -m ) ;;
esac
fi
CWD=$(pwd)
TMP=${TMP:-/tmp}
PKG=$TMP/package-mesa
if [ "$ARCH" = "i486" ]; then
SLKCFLAGS="-O2 -march=i486 -mtune=i686"
LIBDIRSUFFIX=""
elif [ "$ARCH" = "x86_64" ]; then
# SLKCFLAGS="$CFLAGS"
SLKCFLAGS="-O2 -pipe -fPIC"
LIBDIRSUFFIX="64"
else
SLKCFLAGS="-O2"
LIBDIRSUFFIX=""
fi
rm -rf $PKG
mkdir -p $TMP $PKG
cd $TMP
rm -rf Mesa-${VERSION}
#tar xvf $CWD/MesaLib-${VERSION}.tar.?z* || exit 1
unzip $CWD/MesaLib-${VERSION}.zip || exit 1
cd Mesa-$VERSION
# Let's kill the warning about operating on a dangling symlink:
rm -f src/gallium/state_trackers/d3d1x/w32api
# Make sure ownerships and permissions are sane:
chown -R root:root .
find . \
\( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-exec chmod 755 {} \; -o \
\( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-exec chmod 644 {} \;
# Apply patches from git (and maybe elsewhere):
# Patches obtained by:
git checkout origin/8.0
git format-patch 3d657b14b4cab98a2945904823e78cd8950944f4.. # 8.0.3 release
if /bin/ls $CWD/patches/*.patch 1> /dev/null 2> /dev/null ; then
for patch in $CWD/patches/*.patch ; do
patch -p1 < $patch || exit 1 ;
done
fi
if [ ! -r configure ]; then
autoreconf || exit 1
fi
# Fix llvm build problem with Mesa 9.1.6
#patch -Np1 -i $CWD/MesaLib-9.1.6-llvm_fixes-1.patch
# Ignore llvm r300 requirement
#patch -Np1 -i $CWD/mesa-9.2-dont-require-llvm-for-r300.patch
# Fix building with LLVM 3.3 (Courtesy of LFS)
sed -i "/LLVM_VERSION_INT/s:-ne:-lt:" configure.ac
# Running autogen to avoid problems if our autotools don't match upstream's:
./autogen.sh
# Optional configure options listed here:
# --enable-opencl
CFLAGS="$SLKCFLAGS" \
./configure \
--prefix=/usr \
--sysconfdir=/etc \
--libdir=/usr/lib${LIBDIRSUFFIX} \
--mandir=/usr/man \
--docdir=/usr/doc/mesa-$VERSION \
--with-dri-drivers="$DRI_DRIVERS" \
--with-dri-driverdir=/usr/lib${LIBDIRSUFFIX}/xorg/modules/dri \
--build=$ARCH-slackware-linux
# r300 requires llvm
# Other gallium drivers:
# galahad,i915,identity,llvmpipe,noop,nv50,nvc0,nvfx,rbug,softpipe,svga,trace
make $NUMJOBS || make || exit 1
make install DESTDIR=$PKG || exit 1
# Now install the demos
( cd $TMP
rm -rf mesa-demos-$DEMOVERS
tar xvf $CWD/mesa-demos-$DEMOVERS.tar.?z* || exit 1
cd mesa-demos-$DEMOVERS
sh autogen.sh
chown -R root:root .
find . \
\( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-exec chmod 755 {} \; -o \
\( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-exec chmod 644 {} \;
CFLAGS="$SLKCFLAGS" \
./configure \
--prefix=/usr \
--libdir=/usr/lib${LIBDIRSUFFIX} \
--build=$ARCH-slackware-linux
# Build and install gears and glinfo, as well as a few other demos
make -C src/demos gears glinfo
make -C src/xdemos \
glthreads glxcontexts glxdemo glxgears glxgears_fbconfig \
glxheads glxinfo glxpbdemo glxpixmap
mkdir -p $PKG/usr/bin
cp -a src/demos/{gears,glinfo} $PKG/usr/bin
for i in glthreads glxcontexts glxdemo glxgears glxgears_fbconfig \
glxheads glxinfo glxpbdemo glxpixmap ; do
cp -a src/xdemos/$i $PKG/usr/bin ;
done
)
# Strip binaries:
find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
| cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
find $PKG/usr/man -type f -exec gzip -9 {} \;
for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
# Compress info files, if any:
if [ -d $PKG/usr/info ]; then
rm -f $PKG/usr/info/dir
gzip -9 $PKG/usr/info/*
fi
mkdir -p $PKG/usr/doc/Mesa-$VERSION/html
cp -a \
docs/COPYING* docs/relnotes-${VERSION}*.html docs/README* docs/GL* \
$PKG/usr/doc/Mesa-$VERSION
cp -a docs/*.html $PKG/usr/doc/Mesa-$VERSION/html
rm -f $PKG/usr/doc/Mesa-$VERSION/html/relnotes*.html
mkdir -p $PKG/install
cat $CWD/slack-desc > $PKG/install/slack-desc
cd $PKG
/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
Now if only I could get opengl vsync to work...
Cheers! :beer: |
