LinuxQuestions.org
Review your favorite Linux distribution.
Home Forums Tutorials Articles Register
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > SUSE / openSUSE
Reload this Page [SOLVED] Printer problems with 15.1
User Name
Password
SUSE / openSUSE This Forum is for the discussion of Suse Linux.

Notices


Reply
  Search this Thread
Old 01-05-2020, 03:58 AM   #1
Crb999
Member
 
Registered: Jan 2017
Location: West Coast Scotland
Distribution: Suse Linux 42.2 Now 15.1
Posts: 319

Rep: Reputation: Disabled
Printer problems with 15.1

After the last upgrade, or perhaps the one before that, My Epson stopped working again.
I can print wirelessly from windoze and I can use suze to wirelessly print to another wifi epson printer as I could before, but now the WF 5110 ignores me!

I checked back over my discussions with ferrari in 2017 and have retraced every step, to no avail.

during trawling I came across the Open Suze Forum discussion between ferrari and busy penguin!

"Thread: Epson printer driver missing file (that isn't missing)"

I've worked right through that too. No luck!

so here are some outputs which I hope can help lead to clearing this matter up.

Code:
file /opt/epson-inkjet-printer-escpr/cups/lib/filter/epson-escpr-wrapper
/opt/epson-inkjet-printer-escpr/cups/lib/filter/epson-escpr-wrapper: directory
And

Code:
ldd /opt/epson-inkjet-printer-escpr/cups/lib/filter/epson-escpr-wrapper
ldd: /opt/epson-inkjet-printer-escpr/cups/lib/filter/epson-escpr-wrapper: not regular file
I see that, different to Busy Penguin, I have

Code:
drwxr-xr-x 1 root root 102 Dec 27 13:33 epson-escpr-wrapper
It's a directory in which I have Epson-WF-5110_Series-epson-inkjet-printer-escpr.ppd


I have increased CUPS logging verbosity as suggested and having deleted the Cups log, I've sent a single line to the printer.

Here, in two lumps, are the head and tail of that log:

Code:
crb999@linux-ox1l:~> cat cupslog100head.txt      
D [03/Jan/2020:12:58:03 +0000] [Client 62] con->http=0x5623e4bfb600
D [03/Jan/2020:12:58:03 +0000] [Client 62] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26775, file=23
D [03/Jan/2020:12:58:03 +0000] [Client 62] Waiting for CGI data.
D [03/Jan/2020:12:58:03 +0000] [Client 62] CGI data ready to be sent.
D [03/Jan/2020:12:58:03 +0000] [Client 62] con->http=0x5623e4bfb600
D [03/Jan/2020:12:58:03 +0000] [Client 62] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26775, file=23
D [03/Jan/2020:12:58:03 +0000] [Client 62] Waiting for CGI data.
D [03/Jan/2020:12:58:03 +0000] [Client 62] con->http=0x5623e4bfb600
D [03/Jan/2020:12:58:03 +0000] [Client 62] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26775, file=23
D [03/Jan/2020:12:58:03 +0000] [Client 62] Waiting for CGI data.
D [03/Jan/2020:12:58:03 +0000] [Client 62] CGI data ready to be sent.
D [03/Jan/2020:12:58:03 +0000] [Client 62] con->http=0x5623e4bfb600
D [03/Jan/2020:12:58:03 +0000] [Client 62] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26775, file=23
D [03/Jan/2020:12:58:03 +0000] [Client 62] Waiting for CGI data.
D [03/Jan/2020:12:58:03 +0000] [Client 62] con->http=0x5623e4bfb600
D [03/Jan/2020:12:58:03 +0000] [Client 62] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26775, file=23
D [03/Jan/2020:12:58:03 +0000] [Client 62] Waiting for CGI data.
D [03/Jan/2020:12:58:03 +0000] [Client 62] CGI data ready to be sent.
D [03/Jan/2020:12:58:03 +0000] [Client 62] con->http=0x5623e4bfb600
D [03/Jan/2020:12:58:03 +0000] [Client 62] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26775, file=23
D [03/Jan/2020:12:58:03 +0000] [Client 62] Waiting for CGI data.
D [03/Jan/2020:12:58:03 +0000] [Client 62] con->http=0x5623e4bfb600
D [03/Jan/2020:12:58:03 +0000] [Client 62] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26775, file=23
D [03/Jan/2020:12:58:03 +0000] [Client 62] Waiting for CGI data.
D [03/Jan/2020:12:58:03 +0000] [Client 62] CGI data ready to be sent.
D [03/Jan/2020:12:58:03 +0000] [Client 62] con->http=0x5623e4bfb600
D [03/Jan/2020:12:58:03 +0000] [Client 62] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26775, file=23
D [03/Jan/2020:12:58:03 +0000] [Client 62] Waiting for CGI data.
D [03/Jan/2020:12:58:03 +0000] [Client 62] con->http=0x5623e4bfb600
D [03/Jan/2020:12:58:03 +0000] [Client 62] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26775, file=23
D [03/Jan/2020:12:58:03 +0000] [Client 62] Waiting for CGI data.
D [03/Jan/2020:12:58:03 +0000] [Client 62] CGI data ready to be sent.
D [03/Jan/2020:12:58:03 +0000] [Client 62] con->http=0x5623e4bfb600
D [03/Jan/2020:12:58:03 +0000] [Client 62] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26775, file=23
D [03/Jan/2020:12:58:03 +0000] [Client 62] Waiting for CGI data.
D [03/Jan/2020:12:58:03 +0000] [Client 62] con->http=0x5623e4bfb600
D [03/Jan/2020:12:58:03 +0000] [Client 62] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26775, file=23
D [03/Jan/2020:12:58:03 +0000] [Client 62] Waiting for CGI data.
D [03/Jan/2020:12:58:03 +0000] [Client 62] CGI data ready to be sent.
D [03/Jan/2020:12:58:03 +0000] [Client 62] con->http=0x5623e4bfb600
D [03/Jan/2020:12:58:03 +0000] [Client 62] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26775, file=23
D [03/Jan/2020:12:58:03 +0000] [Client 62] Waiting for CGI data.
D [03/Jan/2020:12:58:03 +0000] [Client 62] con->http=0x5623e4bfb600
D [03/Jan/2020:12:58:03 +0000] [Client 62] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26775, file=23
D [03/Jan/2020:12:58:03 +0000] [Client 62] Waiting for CGI data.
D [03/Jan/2020:12:58:03 +0000] [Client 62] CGI data ready to be sent.
D [03/Jan/2020:12:58:03 +0000] [Client 62] con->http=0x5623e4bfb600
D [03/Jan/2020:12:58:03 +0000] [Client 62] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26775, file=23
D [03/Jan/2020:12:58:03 +0000] [Client 62] Waiting for CGI data.
D [03/Jan/2020:12:58:03 +0000] [Client 62] con->http=0x5623e4bfb600
D [03/Jan/2020:12:58:03 +0000] [Client 62] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26775, file=23
D [03/Jan/2020:12:58:03 +0000] [Client 62] Waiting for CGI data.
D [03/Jan/2020:12:58:03 +0000] [Client 62] CGI data ready to be sent.
D [03/Jan/2020:12:58:03 +0000] [Client 62] con->http=0x5623e4bfb600
D [03/Jan/2020:12:58:03 +0000] [Client 62] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26775, file=23
D [03/Jan/2020:12:58:03 +0000] [Client 62] Waiting for CGI data.
D [03/Jan/2020:12:58:03 +0000] [Client 62] con->http=0x5623e4bfb600
D [03/Jan/2020:12:58:03 +0000] [Client 62] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26775, file=23
D [03/Jan/2020:12:58:03 +0000] [Client 62] Waiting for CGI data.
D [03/Jan/2020:12:58:03 +0000] [Client 62] CGI data ready to be sent.
D [03/Jan/2020:12:58:03 +0000] [Client 62] con->http=0x5623e4bfb600
D [03/Jan/2020:12:58:03 +0000] [Client 62] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26775, file=23
D [03/Jan/2020:12:58:03 +0000] [Client 62] Waiting for CGI data.
D [03/Jan/2020:12:58:03 +0000] [Client 62] con->http=0x5623e4bfb600
D [03/Jan/2020:12:58:03 +0000] [Client 62] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26775, file=23
D [03/Jan/2020:12:58:03 +0000] [Client 62] Waiting for CGI data.
D [03/Jan/2020:12:58:03 +0000] [Client 62] CGI data ready to be sent.
D [03/Jan/2020:12:58:03 +0000] [Client 62] con->http=0x5623e4bfb600
D [03/Jan/2020:12:58:03 +0000] [Client 62] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26775, file=23
D [03/Jan/2020:12:58:03 +0000] [Client 62] Waiting for CGI data.
D [03/Jan/2020:12:58:03 +0000] [Client 62] con->http=0x5623e4bfb600
D [03/Jan/2020:12:58:03 +0000] [Client 62] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26775, file=23
D [03/Jan/2020:12:58:03 +0000] [Client 62] Waiting for CGI data.
D [03/Jan/2020:12:58:03 +0000] [Client 62] CGI data ready to be sent.
D [03/Jan/2020:12:58:03 +0000] [Client 62] con->http=0x5623e4bfb600
D [03/Jan/2020:12:58:03 +0000] [Client 62] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26775, file=23
D [03/Jan/2020:12:58:03 +0000] [Client 62] Waiting for CGI data.
D [03/Jan/2020:12:58:03 +0000] [Client 62] con->http=0x5623e4bfb600
D [03/Jan/2020:12:58:03 +0000] [Client 62] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26775, file=23
D [03/Jan/2020:12:58:03 +0000] [Client 62] Waiting for CGI data.
D [03/Jan/2020:12:58:03 +0000] [Client 62] CGI data ready to be sent.
D [03/Jan/2020:12:58:03 +0000] [Client 62] con->http=0x5623e4bfb600
D [03/Jan/2020:12:58:03 +0000] [Client 62] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26775, file=23
D [03/Jan/2020:12:58:03 +0000] [Client 62] Waiting for CGI data.
D [03/Jan/2020:12:58:03 +0000] [Client 62] con->http=0x5623e4bfb600
D [03/Jan/2020:12:58:03 +0000] [Client 62] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26775, file=23
D [03/Jan/2020:12:58:03 +0000] [Client 62] Waiting for CGI data.
D [03/Jan/2020:12:58:03 +0000] [Client 62] CGI data ready to be sent.
D [03/Jan/2020:12:58:03 +0000] [Client 62] con->http=0x5623e4bfb600
D [03/Jan/2020:12:58:03 +0000] [Client 62] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26775, file=23
D [03/Jan/2020:12:58:03 +0000] [Client 62] Waiting for CGI data.
D [03/Jan/2020:12:58:03 +0000] [Client 62] con->http=0x5623e4bfb600
D [03/Jan/2020:12:58:03 +0000] [Client 62] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26775, file=23
D [03/Jan/2020:12:58:03 +0000] [Client 62] Waiting for CGI data.
D [03/Jan/2020:12:58:03 +0000] [Client 62] CGI data ready to be sent.
D [03/Jan/2020:12:58:03 +0000] [Client 62] con->http=0x5623e4bfb600
D [03/Jan/2020:12:58:03 +0000] [Client 62] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26775, file=23
D [03/Jan/2020:12:58:03 +0000] [Client 62] Waiting for CGI data.
D [03/Jan/2020:12:58:03 +0000] [Client 62] con->http=0x5623e4bfb600
D [03/Jan/2020:12:58:03 +0000] [Client 62] cupsdWriteClient error=0, use
And tail,

Code:
crb999@linux-ox1l:~> cat cupslog100tail.txt     
D [03/Jan/2020:13:05:24 +0000] [Client 43] Flushing write buffer.
D [03/Jan/2020:13:05:24 +0000] [Client 43] New state is HTTP_STATE_WAITING
D [03/Jan/2020:13:05:24 +0000] [Client 43] Waiting for request.
D [03/Jan/2020:13:05:24 +0000] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [03/Jan/2020:13:05:24 +0000] [Client 43] POST / HTTP/1.1
D [03/Jan/2020:13:05:24 +0000] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [03/Jan/2020:13:05:24 +0000] [Client 43] Read: status=200, state=6
D [03/Jan/2020:13:05:24 +0000] [Client 43] No authentication data provided.
D [03/Jan/2020:13:05:24 +0000] [Client 43] 2.0 Get-Printer-Attributes 3
D [03/Jan/2020:13:05:24 +0000] Get-Printer-Attributes ipp://localhost:631/printers/epsonwf5110series
D [03/Jan/2020:13:05:24 +0000] [Client 43] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost:631/printers/epsonwf5110series) from localhost
D [03/Jan/2020:13:05:24 +0000] [Client 43] Content-Length: 1458
D [03/Jan/2020:13:05:24 +0000] [Client 43] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Jan/2020:13:05:24 +0000] [Client 43] con->http=0x5555a12ac340
D [03/Jan/2020:13:05:24 +0000] [Client 43] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1458, response=0x5555a12d6d10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Jan/2020:13:05:24 +0000] [Client 43] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Jan/2020:13:05:24 +0000] [Client 43] bytes=0, http_state=0, data_remaining=1458
D [03/Jan/2020:13:05:24 +0000] [Client 43] Flushing write buffer.
D [03/Jan/2020:13:05:24 +0000] [Client 43] New state is HTTP_STATE_WAITING
D [03/Jan/2020:13:05:24 +0000] [Client 43] Waiting for request.
D [03/Jan/2020:13:05:24 +0000] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [03/Jan/2020:13:05:24 +0000] [Client 43] POST / HTTP/1.1
D [03/Jan/2020:13:05:24 +0000] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [03/Jan/2020:13:05:24 +0000] [Client 43] Read: status=200, state=6
D [03/Jan/2020:13:05:24 +0000] [Client 43] No authentication data provided.
D [03/Jan/2020:13:05:24 +0000] [Client 43] 2.0 CUPS-Get-Printers 4
D [03/Jan/2020:13:05:24 +0000] CUPS-Get-Printers
D [03/Jan/2020:13:05:24 +0000] [Client 43] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [03/Jan/2020:13:05:24 +0000] [Client 43] Content-Length: 1094
D [03/Jan/2020:13:05:24 +0000] [Client 43] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Jan/2020:13:05:24 +0000] [Client 43] con->http=0x5555a12ac340
D [03/Jan/2020:13:05:24 +0000] [Client 43] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1094, response=0x5555a1295eb0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Jan/2020:13:05:24 +0000] [Client 43] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Jan/2020:13:05:24 +0000] [Client 43] bytes=0, http_state=0, data_remaining=1094
D [03/Jan/2020:13:05:24 +0000] [Client 43] Flushing write buffer.
D [03/Jan/2020:13:05:24 +0000] [Client 43] New state is HTTP_STATE_WAITING
D [03/Jan/2020:13:05:24 +0000] [Client 43] Waiting for request.
D [03/Jan/2020:13:05:24 +0000] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [03/Jan/2020:13:05:24 +0000] [Client 43] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [03/Jan/2020:13:05:24 +0000] [Client 43] Closing connection.
D [03/Jan/2020:13:05:24 +0000] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [03/Jan/2020:13:05:25 +0000] Expiring subscriptions...
D [03/Jan/2020:13:05:27 +0000] [Client 3] POST / HTTP/1.1
D [03/Jan/2020:13:05:27 +0000] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [03/Jan/2020:13:05:27 +0000] [Client 3] Read: status=200, state=6
D [03/Jan/2020:13:05:27 +0000] [Client 3] No authentication data provided.
D [03/Jan/2020:13:05:27 +0000] [Client 3] 2.0 Renew-Subscription 210
D [03/Jan/2020:13:05:27 +0000] Renew-Subscription /
D [03/Jan/2020:13:05:27 +0000] cupsdIsAuthorized: requesting-user-name="crb999"
D [03/Jan/2020:13:05:27 +0000] cupsdMarkDirty(----S)
D [03/Jan/2020:13:05:27 +0000] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [03/Jan/2020:13:05:27 +0000] [Client 3] Returning IPP successful-ok for Renew-Subscription (/) from localhost
D [03/Jan/2020:13:05:27 +0000] [Client 3] Content-Length: 106
D [03/Jan/2020:13:05:27 +0000] [Client 3] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
I [03/Jan/2020:13:05:27 +0000] Expiring subscriptions...
D [03/Jan/2020:13:05:27 +0000] [Client 3] con->http=0x5555a12a0cb0
D [03/Jan/2020:13:05:27 +0000] [Client 3] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=106, response=0x5555a11fb430(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Jan/2020:13:05:27 +0000] [Client 3] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Jan/2020:13:05:27 +0000] [Client 3] bytes=0, http_state=0, data_remaining=106
D [03/Jan/2020:13:05:27 +0000] [Client 3] Flushing write buffer.
D [03/Jan/2020:13:05:27 +0000] [Client 3] New state is HTTP_STATE_WAITING
D [03/Jan/2020:13:05:27 +0000] [Client 3] Waiting for request.
D [03/Jan/2020:13:05:27 +0000] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I [03/Jan/2020:13:05:28 +0000] Saving printers.conf...
I [03/Jan/2020:13:05:28 +0000] Saving job.cache...
I [03/Jan/2020:13:05:28 +0000] Saving subscriptions.conf...
D [03/Jan/2020:13:05:28 +0000] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
I [03/Jan/2020:13:05:28 +0000] Expiring subscriptions...
I [03/Jan/2020:13:06:41 +0000] Expiring subscriptions...
D [03/Jan/2020:13:06:41 +0000] [Job 249] Unloading...
D [03/Jan/2020:13:06:41 +0000] [Job 250] Unloading...
D [03/Jan/2020:13:06:41 +0000] [Job 251] Unloading...
D [03/Jan/2020:13:06:41 +0000] [Job 252] Unloading...
D [03/Jan/2020:13:06:41 +0000] [Job 253] Unloading...
D [03/Jan/2020:13:06:41 +0000] [Job 254] Unloading...
D [03/Jan/2020:13:06:41 +0000] cupsdAddCert: Adding certificate for PID 0
D [03/Jan/2020:13:06:41 +0000] Closing client 1 after 300 seconds of inactivity.
D [03/Jan/2020:13:06:41 +0000] [Client 1] Closing connection.
D [03/Jan/2020:13:06:41 +0000] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [03/Jan/2020:13:06:41 +0000] Closing client 4 after 300 seconds of inactivity.
D [03/Jan/2020:13:06:41 +0000] [Client 4] Closing connection.
D [03/Jan/2020:13:06:41 +0000] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [03/Jan/2020:13:06:41 +0000] Report: clients=2
D [03/Jan/2020:13:06:41 +0000] Report: jobs=13
D [03/Jan/2020:13:06:41 +0000] Report: jobs-active=1
D [03/Jan/2020:13:06:41 +0000] Report: printers=2
D [03/Jan/2020:13:06:41 +0000] Report: stringpool-string-count=27786
D [03/Jan/2020:13:06:41 +0000] Report: stringpool-alloc-bytes=16608
D [03/Jan/2020:13:06:41 +0000] Report: stringpool-total-bytes=553272
I [03/Jan/2020:13:10:03 +0000] Expiring subscriptions...
D [03/Jan/2020:13:10:03 +0000] Closing client 2 after 300 seconds of inactivity.
D [03/Jan/2020:13:10:03 +0000] [Client 2] Closing connection.
D [03/Jan/2020:13:10:03 +0000] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [03/Jan/2020:13:10:03 +0000] Report: clients=1
D [03/Jan/2020:13:10:03 +0000] Report: jobs=13
D [03/Jan/2020:13:10:03 +0000] Report: jobs-active=1
D [03/Jan/2020:13:10:03 +0000] Report: printers=2
D [03/Jan/2020:13:10:03 +0000] Report: stringpool-string-count=27784
D [03/Jan/2020:13:10:03 +0000] Report: stringpool-alloc-bytes=16608
D [03/Jan/2020:13:10:03 +0000] Report: stringpool-total-bytes=553224
I'm not sure if they can be of any value but the whole log. for a single print failure is close to 1mb

Now, seeing that the epson wrapper is not supposed to be a directory must be the source of the problem however I only use yast to install so am somewhat confused.

I do admit to putting the Epson-WF-5110_Series-epson-inkjet-printer-escpr.ppd in lots of places, as that seems to be the file that the WF52110 needs. I'll strip them out when I know more.

Regards and HNY

Chris
 
Old 01-05-2020, 04:36 AM   #2
Sauerland
Member
 
Registered: Jul 2017
Distribution: openSUSE Leap
Posts: 194

Rep: Reputation: Disabled
This is a Leap 15.1 System?

Please post as root:
Code:
systemctl status firewalld
Code:
zypper se -si firewall
 
Old 01-06-2020, 06:18 AM   #3
Crb999
Member
 
Registered: Jan 2017
Location: West Coast Scotland
Distribution: Suse Linux 42.2 Now 15.1
Posts: 319

Original Poster
Rep: Reputation: Disabled
Hi Sauerland,

Code:
linux-ox1l:/home/crb999 # systemctl status firewalld
● firewalld.service - firewalld - dynamic firewall daemon
   Loaded: loaded (/usr/lib/systemd/system/firewalld.service; disabled; vendor preset: disabled)
   Active: inactive (dead)
     Docs: man:firewalld(1)
linux-ox1l:/home/crb999 #
And

Code:
linux-ox1l:/home/crb999 # zypper se -si firewall
Loading repository data...
Reading installed packages...

S  | Name             | Type    | Version          | Arch   | Repository     
---+------------------+---------+------------------+--------+----------------
i+ | firewall-macros  | package | 0.5.5-lp151.5.1  | noarch | Main Repository
i+ | firewalld        | package | 0.5.5-lp151.5.1  | noarch | Main Repository
i+ | firewalld-lang   | package | 0.5.5-lp151.5.1  | noarch | Main Repository
i+ | python3-firewall | package | 0.5.5-lp151.5.1  | noarch | Main Repository
i+ | yast2-firewall   | package | 4.1.12-lp151.1.1 | noarch | Main Repository
linux-ox1l:/home/crb999 #
 
Old 01-10-2020, 02:52 AM   #4
Crb999
Member
 
Registered: Jan 2017
Location: West Coast Scotland
Distribution: Suse Linux 42.2 Now 15.1
Posts: 319

Original Poster
Rep: Reputation: Disabled
Sauerland, hope all is well?
 
Old 01-11-2020, 02:55 AM   #5
Sauerland
Member
 
Registered: Jul 2017
Distribution: openSUSE Leap
Posts: 194

Rep: Reputation: Disabled
Also please post:
Code:
zypper se -si epson
http://download.ebz.epson.net/dsc/se...search/?OSC=LX
This driver was updated at Dec. 26 2019.

So try to update.
 
Old 01-11-2020, 04:38 AM   #6
Crb999
Member
 
Registered: Jan 2017
Location: West Coast Scotland
Distribution: Suse Linux 42.2 Now 15.1
Posts: 319

Original Poster
Rep: Reputation: Disabled
Hi Sauerland, Good to see you.

Code:
Loading repository data...
Reading installed packages...
No matching items found.
crb999@linux-ox1l:~>
 
Old 01-11-2020, 04:44 AM   #7
Sauerland
Member
 
Registered: Jul 2017
Distribution: openSUSE Leap
Posts: 194

Rep: Reputation: Disabled
So the question is:
How do you install the driver.

Download and install it, see the above link.
 
Old 01-11-2020, 04:46 AM   #8
Crb999
Member
 
Registered: Jan 2017
Location: West Coast Scotland
Distribution: Suse Linux 42.2 Now 15.1
Posts: 319

Original Poster
Rep: Reputation: Disabled
I've just connected via eth0, added the WF5110 printer, selected the driver Yast suggested, and 'printing a test page' gave this message:

wf5110-260 root 17408 Sat Jan 11 10:41:52 2020
printer wf5110 is idle. enabled since Sat Jan 11 10:41:52 2020
File "/opt/epson-inkjet-printer-escpr/cups/lib/filter/epson-escpr-wrapper" is a directory.
 
Old 01-11-2020, 08:04 AM   #9
Crb999
Member
 
Registered: Jan 2017
Location: West Coast Scotland
Distribution: Suse Linux 42.2 Now 15.1
Posts: 319

Original Poster
Rep: Reputation: Disabled
I searched for "epson-escpr-wrapper"
Eventually found it in https://opensuse.pkgs.org
Zyppered it in and all runs.

I shall search for the 10 copies of the ppd that was recommended everywhere, and delete them.

Thanks for your help!

Regards

Chris
 
Old 01-11-2020, 08:13 AM   #10
Sauerland
Member
 
Registered: Jul 2017
Distribution: openSUSE Leap
Posts: 194

Rep: Reputation: Disabled
Drivers are here:
http://download.ebz.epson.net/dsc/se...search/?OSC=LX

Search with:
Code:
WF-5110
And you will get the printer driver:
epson-inkjet-printer-escpr-1.7.7-1lsb3.2.x86_64.rpm
which has the wrapper inside:
Code:
rpm -qlp /home/stephan/Downloads/epson-inkjet-printer-escpr-1.7.7-1lsb3.2.x86_64.rpm | grep wrapper
warning: /home/stephan/Downloads/epson-inkjet-printer-escpr-1.7.7-1lsb3.2.x86_64.rpm: Header V4 DSA/SHA1 Signature, key ID 8aa65d56: NOKEY
/opt/epson-inkjet-printer-escpr/cups/lib/filter/epson-escpr-wrapper
 
  


Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
[SOLVED] My HP 2600 printer stopped printing and their isn't a printer model now in the settings? the error message says the printer is paused? sudo1 Linux - Server 6 04-02-2019 06:14 AM
Printer problems, can't find a printer that is attached to a windows network. ahalfapint Linux - Networking 2 04-12-2006 04:29 PM
keeping printer on at bootup keeps printer from printing (some printer modules loaded TheOneAndOnlySM Slackware 1 10-17-2003 07:39 PM
how do i make redhat recognize my printer new printer driver Kilahchris Linux - General 2 03-04-2003 05:08 PM
Printer Basics 101 Unistalling previous printer Dirver SPMcRuube Linux - Newbie 1 12-02-2002 03:13 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > SUSE / openSUSE

All times are GMT -5. The time now is 05:47 PM.

Contact Us - Advertising Info - Rules - Privacy - LQ Merchandise - Donations - Contributing Member - LQ Sitemap -
Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration