LinuxQuestions.org
Help answer threads with 0 replies.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware
User Name
Password
Slackware This Forum is for the discussion of Slackware Linux.

Notices


Reply
  Search this Thread
Old 05-17-2018, 10:00 PM   #1
NightSky
Member
 
Registered: Sep 2001
Location: Texas :(
Distribution: Slackware64-14.1
Posts: 873

Rep: Reputation: 51
Mediatek USB VCOM Cellphone Drivers


Need these Mediatek USB VCOM Drivers so fastboot can find Doogee Device. Anyone know if these drivers are available for Linux?

Last edited by NightSky; 05-17-2018 at 10:02 PM.
 
Old 05-19-2018, 12:13 PM   #2
coralfang
Member
 
Registered: Nov 2010
Location: Bristol, UK
Distribution: Slackware, FreeBSD
Posts: 710
Blog Entries: 3

Rep: Reputation: 212Reputation: 212Reputation: 212
What do you mean by "fastboot" being able to find the device?

Mediatek USB drivers should already be in recent Linux kernels IIRC. I used the Mediatek SP_Flash_Tool several months ago on Slackware, to root two android devices (one was a doogee, and the other an UMI SUPER).

This may be of some use, although focused on flashing custom roms to a device:
https://forum.xda-developers.com/gen...linux-t3160802

If you look at guides for this process relating to the SP_Flash_Tool being used on a Windows host, there is an extra step to setup/install "VCOM" drivers.
This wasn't needed for the rooting process on Linux, assuming the USB drivers are already present as available kernel modules.
 
Old 06-01-2018, 07:29 PM   #3
NightSky
Member
 
Registered: Sep 2001
Location: Texas :(
Distribution: Slackware64-14.1
Posts: 873

Original Poster
Rep: Reputation: 51
@coralfang Finally someone who ran SP Flashtool on Slackware & for a Doogee.
What is the equivalent of 80-persistent-usb.rules on slackware? Did you have to install libusb-dev or not. I'm trying to follow the same tutorial. Have SP_Flash_Tool v5.1816_Linux running in /home/xxx/spflash, the DoogeeMix stock download unpacked in /Downloads/Doogee/stock/unpack MT6757_Android_scatter.txt set in spflash tool loads fine every time I open the tool ./flash_tool; MTK_AllinOne_DA.bin is also selected. I simply unzip the tool to install didn't use any scripts or create a slackpk - don't know how.

Whenever I connect the USB Cable the Battery Icon comes on in a minute of so? Don't know how to take the phone apart to remove battery Device is in Orange State and has Jemmini's 3.1.1 TWRP Recovery installed, I can boot into fastboot using the Up+ Power Buttons but on a normal reboot it doesn't go past Doogee Logo and security & Orange State Warning?

1June2018
Created the Blacklist:
Code:
/etc/udev/rules.d/20-mm-blacklist-mtk.rules  

 You insert these two lines:
 ATTRS{idVendor}=="0e8d", ENV{ID_MM_DEVICE_IGNORE}="1"  
 ATTRS{idVendor}=="6000", ENV{ID_MM_DEVICE_IGNORE}="1"

Changed from Download Only to Uprgrade Firmware
With the Battery in - Phone Power Off Connect USB After Hitting Download Button

But then the Battery Icon comes on I get the "Status Change Error"

Code:
Connecting to BROM...
Scanning USB port...
Search usb, timeout set as 3600000 ms
add@/devices/pci0000:00/0000:00:1d.7/usb2/2-7

add@/devices/pci0000:00/0000:00:1d.7/usb2/2-7/2-7:1.0

add@/devices/pci0000:00/0000:00:1d.7/usb2/2-7/2-7:1.1

add@/devices/pci0000:00/0000:00:1d.7/usb2/2-7/2-7:1.1/tty/ttyACM0

vid is 0e8d

device vid = 0e8d

pid is 2000

device pid = 2000

com portName is: /dev/ttyACM0

Total wait time = -1527839420.000000
USB port is obtained. path name(/dev/ttyACM0), port name(/dev/ttyACM0)
USB port detected: /dev/ttyACM0
Connect BROM failed: STATUS_ERR
Disconnect!
(What does the following mean?)
*BROM Exception! ( ERROR : STATUS_ERR (-1073676287) , MSP ERROE CODE : 0x00.
Many thanks for any and all help.

Last edited by NightSky; 06-08-2018 at 08:47 PM.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
[SOLVED] read-only USB (cellphone) X.Cyclop Linux - Desktop 5 10-05-2010 08:32 PM
Can I boot a computer via usb from a cellphone sparkkticus Linux - Embedded & Single-board computer 4 09-15-2009 08:46 PM
Cannot connect usb cellphone modem to internet Rodemire Linux - Networking 4 02-15-2009 04:59 PM
Vcom mouse + slackware and latest kernel Mythrill Linux - Hardware 1 12-02-2005 04:15 AM
Connecting a T68 cellphone to RH9 via USB ericcarlson Linux - Hardware 0 03-09-2004 05:11 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware

All times are GMT -5. The time now is 02:13 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration