LinuxQuestions.org
Latest LQ Deal: Latest LQ Deals
Go Back   LinuxQuestions.org > Forums > Other *NIX Forums > *BSD
User Name
Password
*BSD This forum is for the discussion of all BSD variants.
FreeBSD, OpenBSD, NetBSD, etc.

Notices


Reply
  Search this Thread
Old 06-03-2020, 01:47 AM   #1
austinramsay
Member
 
Registered: Jul 2007
Posts: 277

Rep: Reputation: 31
Garbage output in console, yet X starts fine - Sun Ultra 45 XVR-100


Been struggling getting a Sun Ultra 45 workstation up and running with a fresh install of 6.7. Having issues with an Ultra 10 too, but I'll save that for another time lol. The Ultra 45 is running a Sun XVR-100 graphics card which is basically a Radeon 7000 (RV100 chip) except with Sun firmware on it. Once X starts, everything works fine so no issue on the X side of things using the 'radeon' driver. However, the problem is everything before X starts. Once the console comes up all I see is black and white random lines all across the screen. No readable characters just random lines everywhere. I can see the console scrolling since the lines keep moving up but obviously something is wrong!

--------------------------

Full 'dmesg' output here: https://pastebin.com/dTQYUx9F

Some important lines from there:
- "initializing kernel modesetting (RV100 0x1002:0x5159 0x1002:0x0908 0x00)." -- seeing the RV100 on this line would seem like this is proper configuration but I have no idea what the hex represents after it?
- "wsdisplay0" at radeondrm0 mux 1: console (std, sun emulation), using wskbd0

--------------------------

Should 'radeondrm0' from that line be 'radeonfb0'?
After reading the 'wsdisplay' man page and referencing the /usr/include/dev/wscons/wsconsio.h header, there is a 'WSDISPLAY_TYPE_RADEONFB' with a corresponding comment of 'Sun XVR-100' listed next to it on line 430. A few lines down there is 'WSDISPLAY_TYPE_RADEONDRM' with a corresponding comment of 'ATI Radeon KMS framebuffer' next to it on line 439. This is what the chosen display type is showing in my dmesg output.

Could this be the issue? If so, how do I change this option? Is this done through the 'config' command?

I realized that there is a line I probably should have paid more attention to in the dmesg output...
In the line above 'radeondrm0: 1152x900, 8bpp', it says 'BIOS signature incorrect 0 0'
Would that mean the driver it's trying to use doesn't match a compatible card for the driver?

--------------------------

Currently I see under 'config':

- 'wsdisplay* at pcons0|agten*|bwtwo*|cgsix*|cgthree*|cgtwelve*|creator*|creator*|gfxp*|ifb*|machfb*|mgx*|radeonfb*|r aptor*|rfx*|twtwo*|vgafb*|vigra*|zx*|radeondrm* console -1 primary -1 mux 1 flags 0x0'

but I honestly have no idea what that means since it just looks like a entire list of every Sun framebuffer driver out there lol.

--------------------------

The terminal emulation is set properly, per the 'wscons' man page: "The 'sun' console emulation is available by default on the sparc64 architecture" but I don't think that has anything to do with displaying the screen anyway.

Any ideas or tips on what to look for next would be appreciated! This is the first time I have used OpenBSD. Hopefully whatever the issue is could help me out with the Ultra 10 issues too, which seem to be the complete opposite than what this is doing since it has a working console but garbage output when starting X!

Images here:
https://ibb.co/0cR7Lzs
https://ibb.co/cvY48B1

Last edited by austinramsay; 06-03-2020 at 01:50 AM.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Ultra X On Sun Ultra 45..? bentech4u Ultra X 3 09-09-2010 12:34 AM
Trying to use XVR-100 on a Ultra-Sparc rmahn Linux - Hardware 3 02-12-2010 10:34 AM
issue after swapping XVR-100 to XVR-1200 graphics accelorator The_Bug Solaris / OpenSolaris 1 02-11-2010 03:04 PM
What is it that makes Ultra X Linux so "Ultra Fast" and "Ultra Reliable?" foodown Ultra X 1 07-10-2009 06:04 PM
display is distorted in Ultra45 XVR-300 video card mahb4esh Solaris / OpenSolaris 0 10-10-2008 05:17 AM

LinuxQuestions.org > Forums > Other *NIX Forums > *BSD

All times are GMT -5. The time now is 01:35 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration