Virtualbox Update failure

Originally Posted by Master-Sezer Oh iam really sorry, i dont do this never.

No need to apologise. It just makes it easier for me to answer if your posts don't change a lot (by all means edit one of your posts if you need to change some incorrect information in it, but not to add any new information).

Originally Posted by hydrurga Double-clicking on the extension pack file on the desktop will install it into VirtualBox (I usually close VirtualBox before doing so). I don't understand your last question - please refer to my previous post where I talk about how and when to install the latest extension pack.

I have install it before 1 months with 5.2.6.

it is written:
linuxmint@linuxmint-ThinkPad-T530 ~ $ ls -la ~/VirtualBox VMs/Surfen/
ls: Zugriff auf '/home/linuxmint/VirtualBox' nicht möglich: Datei oder Verzeichnis nicht gefunden
ls: Zugriff auf 'VMs/Surfen/' nicht möglich: Datei oder Verzeichnis nicht gefunden

They dont find it, but i have it? It is normal that it is saved in my personal folder?
The strange is, that my VM 1 is switched of and when i will start then i see the same:
Implementation of the USB 3.0 controller not found!
Because the USB 3.0 controller state is part of the saved VM state, the VM cannot be started. To fix this problem, either install the 'Oracle VM VirtualBox Extension Pack' or disable USB 3.0 support in the VM settings (VERR_NOT_FOUND).


Fehlercode:
NS_ERROR_FAILURE (0x80004005)
Komponente:
ConsoleWrap
Interface:
IConsole {872da645-4a9b-1727-bee2-5585105b9eed}

and with the second VM is written: not accessible

Just a note that I will be going out for an hour or two. However, I'll have a look at this thread once I'm back.

Originally Posted by Master-Sezer I have install it before 1 months with 5.2.6. it is written: linuxmint@linuxmint-ThinkPad-T530 ~ $ ls -la ~/VirtualBox VMs/Surfen/ ls: Zugriff auf '/home/linuxmint/VirtualBox' nicht möglich: Datei oder Verzeichnis nicht gefunden ls: Zugriff auf 'VMs/Surfen/' nicht möglich: Datei oder Verzeichnis nicht gefunden They dont find it, but i have it? It is normal that it is saved in my personal folder? The strange is, that my VM 1 is switched of and when i will start then i see the same: Implementation of the USB 3.0 controller not found! Because the USB 3.0 controller state is part of the saved VM state, the VM cannot be started. To fix this problem, either install the 'Oracle VM VirtualBox Extension Pack' or disable USB 3.0 support in the VM settings (VERR_NOT_FOUND). Fehlercode: NS_ERROR_FAILURE (0x80004005) Komponente: ConsoleWrap Interface: IConsole {872da645-4a9b-1727-bee2-5585105b9eed} and with the second VM is written: not accessible

Sorry, my fault. The problem was with the space in "VirtualBox VMs". You need to put a backspace before the space, i.e.

ls -la ~/VirtualBox\ VMs/Surfen/

Ignore the USB3.0 problem for the moment and I would advise you not to fiddle about with VirtualBox until I return or someone else joins in to advise you. Yes, it's normal that the VMs would be in your home directory, unless you indicated to VirtualBox that you wanted them somewhere else.

I need this before?
VirtualBox 5.2.8 Oracle VM VirtualBox Extension Pack

All supported platforms

Ok, i have install the pack and the first machine works normally.
I have see that the 2 machines was false why the machine one was guided with the second machine and
second machine to first machine! Now the first machine works but the second write more:

Document is empty.
Location: '/home/linuxmint/VirtualBox VMs/Surfen/Surfen.vbox', line 1 (0), column 1.
/home/vbox/vbox-5.2.8/src/VBox/Main/src-server/MachineImpl.cpp[741] (nsresult Machine::i_registeredInit()).
Fehlercode:
NS_ERROR_FAILURE (0x80004005)
Komponente:
MachineWrap
Interface:
IMachine {85cd948e-a71f-4289-281e-0ca7ad48cd89}

But its not so important. Now its updated with the extension pack and one machine work so i can make
other more. I will thank you so much! You are a Linux and VM Hero!


linuxmint@linuxmint-ThinkPad-T530 ~ $ ls -la ~/VirtualBox\ VMs/Surfen/
insgesamt 41945124
drwx------ 4 linuxmint linuxmint 4096 Mär 25 20:53 .
drwxrwxr-x 4 linuxmint linuxmint 4096 Mär 25 21:08 ..
-rw------- 1 linuxmint linuxmint 42951770112 Mär 25 20:53 Linux2.vdi
drwx------ 2 linuxmint linuxmint 4096 Mär 25 18:46 Logs
drwx------ 2 linuxmint linuxmint 4096 Mär 25 18:46 Snapshots
-rw------- 1 linuxmint linuxmint 0 Mär 25 20:53 Surfen.vbox
-rw------- 1 linuxmint linuxmint 5667 Mär 25 18:46 Surfen.vbox-prev

Ok, I'm back.

First, for info, can you please paste the output from:

vboxmanage list hdds

Now, let's do the same as before for Surfen (ensure first that VirtualBox is not running):

cd  ~/VirtualBox\ VMs/Surfen/

cp Surfen.vbox-prev Surfen.vbox-copy

cp Surfen.vbox-prev Surfen.vbox

Then try launching that VM.

Hello, i realize that i have mixed here 2 vdi (etc.?)
I cant do nothing with the VM 2.
And when i look in mass storage and attribute then the first machine see the vdi 1 and 2 and
all other machine when i will great then i see all vdi and vbox from all time i great and delete!?

Originally Posted by hydrurga Ok, I'm back. First, for info, can you please paste the output from: vboxmanage list hdds Now, let's do the same as before for Surfen (ensure first that VirtualBox is not running): cd ~/VirtualBox\ VMs/Surfen/ cp Surfen.vbox-prev Surfen.vbox-copy cp Surfen.vbox-prev Surfen.vbox Then try launching that VM.

linuxmint@linuxmint-ThinkPad-T530 ~ $ vboxmanage list hdds
UUID: 9588ec4e-5cbb-45da-805f-08e293fa806d
Parent UUID: base
State: created
Type: normal (base)
Location: /home/linuxmint/VirtualBox VMs/Arbeit/Linux.vdi
Storage format: VDI
Capacity: 40960 MBytes
Encryption: enabled

UUID: 83bc4920-ecbd-4464-9831-dd00ac4361e8
Parent UUID: base
State: locked write
Type: normal (base)
Location: /home/linuxmint/VirtualBox VMs/Surfen/Snapshots/Test VM/Test VM.vdi
Storage format: VDI
Capacity: 8192 MBytes
Encryption: disabled



linuxmint@linuxmint-ThinkPad-T530 ~ $ linuxmint@linuxmint-ThinkPad-T530 ~ $ vboxmanage list hdds
linuxmint@linuxmint-ThinkPad-T530: Befehl nicht gefunden.
linuxmint@linuxmint-ThinkPad-T530 ~ $ UUID: 9588ec4e-5cbb-45da-805f-08e293fa806d
UUID:: Befehl nicht gefunden.
linuxmint@linuxmint-ThinkPad-T530 ~ $ Parent UUID: base
Parent: Befehl nicht gefunden.
linuxmint@linuxmint-ThinkPad-T530 ~ $ State: created
State:: Befehl nicht gefunden.
linuxmint@linuxmint-ThinkPad-T530 ~ $ Type: normal (base)
bash: Syntaxfehler beim unerwarteten Wort `('
linuxmint@linuxmint-ThinkPad-T530 ~ $ Location: /home/linuxmint/VirtualBox VMs/Arbeit/Linux.vdi
Location:: Befehl nicht gefunden.
linuxmint@linuxmint-ThinkPad-T530 ~ $ Storage format: VDI
Storage: Befehl nicht gefunden.
linuxmint@linuxmint-ThinkPad-T530 ~ $ Capacity: 40960 MBytes
Capacity:: Befehl nicht gefunden.
linuxmint@linuxmint-ThinkPad-T530 ~ $ Encryption: enabled
Encryption:: Befehl nicht gefunden.
linuxmint@linuxmint-ThinkPad-T530 ~ $
linuxmint@linuxmint-ThinkPad-T530 ~ $ UUID: 83bc4920-ecbd-4464-9831-dd00ac4361e8
UUID:: Befehl nicht gefunden.
linuxmint@linuxmint-ThinkPad-T530 ~ $ Parent UUID: base
Parent: Befehl nicht gefunden.
linuxmint@linuxmint-ThinkPad-T530 ~ $ State: locked write
State:: Befehl nicht gefunden.
linuxmint@linuxmint-ThinkPad-T530 ~ $ Type: normal (base)
bash: Syntaxfehler beim unerwarteten Wort `('
linuxmint@linuxmint-ThinkPad-T530 ~ $ Location: /home/linuxmint/VirtualBox VMs/Surfen/Snapshots/Test VM/Test VM.vdi
Location:: Befehl nicht gefunden.
linuxmint@linuxmint-ThinkPad-T530 ~ $ Storage format: VDI
Storage: Befehl nicht gefunden.
linuxmint@linuxmint-ThinkPad-T530 ~ $ Capacity: 8192 MBytes
Capacity:: Befehl nicht gefunden.
linuxmint@linuxmint-ThinkPad-T530 ~ $ Encryption: disabled
Encryption:: Befehl nicht gefunden.
linuxmint@linuxmint-ThinkPad-T530 ~ $

I have to say that the first paragraph in your last post is incomprehensible to me.

Please tell me, in your words, what the three VMs that you have are, including which guest operating systems they are running, and which is the one that now works.

Also, please tell me why you tried to run the output from the vboxmanage list hdds command as separate commands. It doesn't make any sense why you would try to do that and then paste the output from that here.

Finally, please tell me why you didn't run the three Surfen-related commands that I asked you to.

I'll speak plainly. If you can't follow my instructions then I'm going to find it difficult to help you.

Originally Posted by hydrurga I have to say that the first paragraph in your last post is incomprehensible to me. Please tell me, in your words, what the three VMs that you have are, including which guest operating systems they are running, and which is the one that now works. Also, please tell me why you tried to run the output from the vboxmanage list hdds command as separate commands. It doesn't make any sense why you would try to do that and then paste the output from that here. Finally, please tell me why you didn't run the three Surfen-related commands that I asked you to. I'll speak plainly. If you can't follow my instructions then I'm going to find it difficult to help you.

You mean this paragraph? UUID: 9588ec4e-5cbb-45da-805f-08e293fa806d ?
Or the mix from 2 vdi? When i have installed first time, then i have some problems and see after
that i have mix some things.
I have only install Linux Mint 18.3 Cinnamon 3 times. I have before this problems 2 other VMs with Linux too but i have delete that. I have see that i have in Version Linux 2.6 but i must have Ubuntu(64) for Linux Mint so i have do that now.
The first machine "Arbeit" is work and the TEST VM that i have great after fix the problems work, too.
Only the second "Surfen" is not working.


Sorry, i dont see my fail. I use Linux and Terminal since 1 month.

linuxmint@linuxmint-ThinkPad-T530 ~ $ vboxmanage list hdds
UUID: 9588ec4e-5cbb-45da-805f-08e293fa806d
Parent UUID: base
State: created
Type: normal (base)
Location: /home/linuxmint/VirtualBox VMs/Arbeit/Linux.vdi
Storage format: VDI
Capacity: 40960 MBytes
Encryption: enabled

UUID: 83bc4920-ecbd-4464-9831-dd00ac4361e8
Parent UUID: base
State: created
Type: normal (base)
Location: /home/linuxmint/VirtualBox VMs/Surfen/Snapshots/Test VM/Test VM.vdi
Storage format: VDI
Capacity: 8192 MBytes
Encryption: disabled

linuxmint@linuxmint-ThinkPad-T530 ~ $ cd ~/VirtualBox\ VMs/Surfen/
linuxmint@linuxmint-ThinkPad-T530 ~/VirtualBox VMs/Surfen $ cp Surfen.vbox-prev Surfen.vbox-copy
linuxmint@linuxmint-ThinkPad-T530 ~/VirtualBox VMs/Surfen $ cp Surfen.vbox-prev Surfen.vbox
linuxmint@linuxmint-ThinkPad-T530 ~/VirtualBox VMs/Surfen $

No, this paragraph:

Hello, i realize that i have mixed here 2 vdi (etc.?) I cant do nothing with the VM 2. And when i look in mass storage and attribute then the first machine see the vdi 1 and 2 and all other machine when i will great then i see all vdi and vbox from all time i great and delete!?

Oddly, what you are telling me does not tie in with what vboxmanage list hdds is telling me. But let's get to that in a moment.

Ok, try launching the Surfen VM now.

Originally Posted by hydrurga No, this paragraph: Oddly, what you are telling me does not tie in with what vboxmanage list hdds is telling me. But let's get to that in a moment. Ok, try launching the Surfen VM now.

I think i cant explain. I use even google translator, too!
Maybe that picture can help. I can delete VM 2 (surfen) and create from now on much better.

Originally Posted by Master-Sezer I think i cant explain. I use even google translator, too! Maybe that picture can help. I can delete VM 2 (surfen) and create from now on much better. Attachment 27309

Ok. Thanks for the screenshot - a great idea!

If you're happy deleting Surfen, and its related virtual HDD, and then creating a new VM then by all means go for it.

Do let us know if you have any further problems or questions, and good luck!

Originally Posted by hydrurga Ok. Thanks for the screenshot - a great idea! If you're happy deleting Surfen, and its related virtual HDD, and then creating a new VM then by all means go for it. Do let us know if you have any further problems or questions, and good luck!

Thank you so much for your help. I have other questions but i think it is now finished here.
Its about the picture when i will upload. I see my picture so little that i cant see that.
Maybe its from add-ons that i have? The german forum have call that they think its from the add-ons.
I can see the pictures in Linux normally as little picture but when i will upload in social communities etc.
then its extreme small that i cant see that you know?

Originally Posted by Master-Sezer Thank you so much for your help. I have other questions but i think it is now finished here. Its about the picture when i will upload. I see my picture so little that i cant see that. Maybe its from add-ons that i have? The german forum have call that they think its from the add-ons. I can see the pictures in Linux normally as little picture but when i will upload in social communities etc. then its extreme small that i cant see that you know?

Can you please create a new thread about this issue? Someone may well be able to help you out.