kernel log errors
 

Im getting these errors upon boot any pointers on where to go to try and fix or remove these would be appreciated. (im concerned about the usbdevfs errors)

[root@localhost robert]# dmesg
Linux version 2.4.21-9.0.3.EL (bhcompile@tweety.devel.redhat.com) (gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-34)) #1 Tue Apr 20 19:54:32 EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000027fc0000 (usable)
BIOS-e820: 0000000027fc0000 - 0000000027ff8000 (ACPI data)
BIOS-e820: 0000000027ff8000 - 0000000028000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
639MB LOWMEM available.
On node 0 totalpages: 163776
zone(0): 4096 pages.
zone(1): 159680 pages.
zone(2): 0 pages.
Kernel command line: ro root=LABEL=/ hdc=ide-scsi hdd=ide-scsi
ide_setup: hdc=ide-scsi
ide_setup: hdd=ide-scsi
Initializing CPU#0
Detected 1594.858 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3185.04 BogoMIPS
Memory: 640072k/655104k available (1525k kernel code, 12468k reserved, 1064k data, 164k init, 0k highmem)
zapping low mappings.
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
Process timing init...done.
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
Total HugeTLB memory allocated, 0
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
aio_setup: num_physpages = 40944
aio_setup: sizeof(struct page) = 56
Hugetlbfs mounted.
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
PCI: Found IRQ 11 for device 02:09.0
Redundant entry in serial pci_table. Please send the output of
lspci -vv, this message (14e4,4212,14e4,0002)
and the manufacturer and name of serial board or modem board
to serial-pci-info@lists.sourceforge.net.
register_serial(): autoconfig failed
Real Time Clock Driver v1.10e
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 256 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 00:1f.1
ICH2: chipset revision 5
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 2B020H1, ATA DISK drive
blk: queue c0411f00, I/O limit 4095Mb (mask 0xffffffff)
hdc: HL-DT-ST GCE-8160B, ATAPI CD/DVD-ROM drive
hdd: 24X10, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 40020624 sectors (20491 MB) w/2048KiB Cache, CHS=2491/255/63, UDMA(100)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 >
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
Initializing IPsec netlink socket
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 161k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 164k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 19:58:05 Apr 20 2004
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 3 for device 00:1f.2
PCI: Setting latency timer of device 00:1f.2 to 64
usb-uhci.c: USB UHCI at I/O 0xef40, IRQ 3
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 10 for device 00:1f.4
PCI: Setting latency timer of device 00:1f.4 to 64
usb-uhci.c: USB UHCI at I/O 0xef80, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
hub.c: new USB device 00:1f.4-2, assigned address 2
hub.c: USB hub found
hub.c: 4 ports detected
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
Adding Swap: 1309256k swap-space (priority -1)
hub.c: new USB device 00:1f.4-2.1, assigned address 3
usb.c: USB device 3 (vend/prod 0x3f0/0x2911) is not claimed by any active driver.
hub.c: new USB device 00:1f.4-2.2, assigned address 4
input0: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb2:4.0
usb-uhci.c: ENXIO 80000380, flags 0, urb e78eef00, burb e72a9100
usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6 len 122 ret -6
usb-uhci.c: ENXIO 80000380, flags 0, urb e72a9100, burb e78eef00
usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6 len 9 ret -6
usb-uhci.c: ENXIO 80000380, flags 0, urb e78eef00, burb e72a9100
usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6 len 9 ret -6
usb-uhci.c: ENXIO 80000380, flags 0, urb e72a9100, burb e78eee80
usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6 len 18 ret -6
usb-uhci.c: ENXIO 80000380, flags 0, urb e78eef00, burb e72a9280
usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6 len 9 ret -6
usb-uhci.c: ENXIO 80000380, flags 0, urb e78eee80, burb e72a9280
usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6 len 9 ret -6
usb-uhci.c: ENXIO 80000380, flags 0, urb e72a9280, burb e78eef00
usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6 len 9 ret -6
usb-uhci.c: ENXIO 80000380, flags 0, urb e78eef00, burb e72a9280
usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6 len 9 ret -6
usb.c: registered new driver usblp
printer.c: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x2911
printer.c: v0.11: USB Printer Device Class driver
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi0 : SCSI emulation for USB Mass Storage devices
Starting timer : 0 0
Vendor: HP Model: psc 2210 Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
Starting timer : 0 0
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
USB Mass Storage support registered.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
hdc: attached ide-scsi driver.
hdd: attached ide-scsi driver.
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Starting timer : 0 0
Vendor: HL-DT-ST Model: CD-RW GCE-8160B Rev: 2.01
Type: CD-ROM ANSI SCSI revision: 02
Starting timer : 0 0
Vendor: ATAPI Model: CD-R/RW 24X10 Rev: P.JJ
Type: CD-ROM ANSI SCSI revision: 02
Starting timer : 0 0
IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com>
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (5118 buckets, 40944 max) - 304 bytes per conntrack
Intel(R) PRO/100 Network Driver - version 2.3.30-k1
Copyright (c) 2003 Intel Corporation

PCI: Found IRQ 11 for device 02:08.0
divert: allocating divert_blk for eth0
e100: selftest OK.
e100: eth0: Intel(R) PRO/100 Network Connection
Hardware receive checksums enabled

parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
0: nvidia: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-5336 Wed Jan 14 18:29:26 PST 2004
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 564M
agpgart: Detected Intel i845 chipset
agpgart: AGP aperture is 64M @ 0xf8000000
inserting floppy driver for 2.4.21-9.0.3.EL
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Intel 810 + AC97 Audio, version 0.24, 19:58:05 Apr 20 2004
PCI: Found IRQ 9 for device 00:1f.5
PCI: Sharing IRQ 9 with 00:1f.3
PCI: Setting latency timer of device 00:1f.5 to 64
i810: Intel ICH2 found at IO 0xef00 and 0xe800, MEM 0x0000 and 0x0000, IRQ 9
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
ac97_codec: AC97 Audio codec, id: ADS96 (Analog Devices AD1885)
i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not present), total channels = 2