Building kernel rpm with acl support
Hi,
I'm trying to build a 2.4.20-8 (the standard RH9) kernel rpm with acl support (for samba). However the only rpm's that are generated are : kernel-BOOT-2.4.20-9.acl.i386.rpm kernel-source-2.4.20-9.acl.i386.rpm kernel-doc-2.4.20-9.acl.i386.rpm There is no kernel-2.4.20-9.acl ?? I've outlined the steps taken below : First of all i installed the 2.4.20-8..src.rpm. I've found out that RH9 ships with the acl patch'es but that they are commented out so i uncommented these patches from the kernel-2.4.spec file. I aso changed the release number to 9.acl. I then ran "rpmbuild -ba kernel-2.4.spec" The build took approx 3 hours (I'm using a P2). I seem to run OK - I've captured the output in a file, i'll send this to anyone who wants a look ;). Please Help, Otherwise i'll loose my samba servers to Win 2003 !! Thanks, Ian |
I am trying to do the same from source/scratch ... with kernel-2.4.26 had some ooops and posted a question
Any information will be helpful |
here is a link I found on how to build a custom kernel rpm.
http://sysadmin.cs.caltech.edu/docs/...tom_kernel_rpm J- |
All times are GMT -5. The time now is 01:06 PM. |