LinuxQuestions.org
Review your favorite Linux distribution.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > MEPIS
Reload this Page Question About Screen Resolution
User Name
Password
MEPIS This forum is for the discussion of MEPIS Linux.

Notices


Reply
  Search this Thread
Old 01-22-2007, 05:46 PM   #1
Visual Basic Imp
LQ Newbie
 
Registered: Apr 2006
Posts: 11

Rep: Reputation: 0
Question About Screen Resolution

Firstly, thank you so much for helping me so far. I have been able so fix everything above and beyond my even wildest aspriations up to this point.
I am currently running my laptop at 1024x768 screen res. Now, i know how to change the resolution, but every time i do change the screen res to its proper 1280x800 the screen gets all glitchy and i cant read anything.
Once again, thanks so much so far
VBIMP
 
Old 01-22-2007, 07:31 PM   #2
kdrlx
Member
 
Registered: Feb 2006
Distribution: Ubuntu Hardy Heron
Posts: 130

Rep: Reputation: 17
copy paste the xorg.conf here ...

1> check the section "Screen" if it has a value, "DefaultDepth" and a number with it.
2> Next check SubSection "Display" for that number and place the resolution you want natively in the line. Remove other modes later, once you have the things fine.

Also, what video ram is configured in the BIOS ? Check if it matches the amount of memory in the xorg.conf file. Again, Section "Device" value - VideoRam
 
Old 01-22-2007, 08:09 PM   #3
Visual Basic Imp
LQ Newbie
 
Registered: Apr 2006
Posts: 11

Original Poster
Rep: Reputation: 0
Code:
Section "ServerLayout"
  Identifier "XFree86 Configured"
  Screen 0 "Screen0" 0 0
 #Screen 0 "ATIScreen" 0 0
  InputDevice "Keyboard0" "CoreKeyboard"
  InputDevice "PS/2 Mouse" "CorePointer"
 #InputDevice "USB Mouse" "CorePointer"
 #InputDevice "Touchpad" "CorePointer"
 #InputDevice "Stylus" "CorePointer"
 #InputDevice "Eraser" "CorePointer"
 #InputDevice "Cursor" "CorePointer"
 #InputDevice "Serial Mouse" "CorePointer"
EndSection

Section "ServerFlags"
  Option "AllowMouseOpenFail" "true"
EndSection

Section "Files"
# Xorg 7.0 font paths
    FontPath 	"/usr/share/X11/fonts/misc:unscaled"
    FontPath 	"/usr/share/X11/fonts/cyrillic"
    FontPath 	"/usr/share/X11/fonts/Type1"
    FontPath 	"/usr/share/X11/fonts/util"

# Legacy font paths
    FontPath 	"/usr/X11R6/lib/X11/fonts/misc:unscaled"
    FontPath 	"/usr/X11R6/lib/X11/fonts/cyrillic"
    FontPath 	"/usr/X11R6/lib/X11/fonts/Type1"
    FontPath 	"/usr/X11R6/lib/X11/fonts/util"

# Other font paths
    FontPath 	"/usr/share/fonts/truetype/ttf-lucida"
    FontPath 	"/usr/share/fonts/truetype/arphic"
    FontPath 	"/usr/share/fonts/truetype/freefont"
    FontPath 	"/usr/share/fonts/truetype/kochi"
    FontPath 	"/usr/share/fonts/truetype/latex-xft-fonts"
    FontPath 	"/usr/share/fonts/truetype/openoffice"
    FontPath 	"/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath 	"/usr/share/fonts/type1/gsfonts"
    FontPath 	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    FontPath 	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"

EndSection

Section "Module"
  Load "GLcore"
  Load "bitmap"
  Load "dbe"
  Load "ddc"
  Load "dri"
  Load "extmod"
  Load "freetype"
  Load "glx"
  Load "int10"
  Load "record"
  Load "type1"
  Load "v4l"
  Load "vbe"
  Load "synaptics"
EndSection

Section "InputDevice"
  Identifier "Keyboard0"
  Driver "keyboard"
  Option "CoreKeyboard"
  Option "XkbModel" "pc105"
  Option "XkbLayout" "us"
  Option "XKbOptions" ""
EndSection

Section "InputDevice"
  Identifier "Serial Mouse"
  Driver "mouse"
  Option  "Protocol" "Microsoft"
  Option  "Device" "/dev/ttyS0"
  Option  "Emulate3Buttons" "false"
  Option  "Emulate3Timeout" "70"
EndSection

Section "InputDevice"
 Identifier "Touchpad"
 Driver "synaptics"
 Option "Device" "/dev/psaux"
 Option "Protocol" "auto-dev"
 Option "LeftEdge" "1700"
 Option "RightEdge" "5300"
 Option "TopEdge" "1700"
 Option "BottomEdge" "4200"
 Option "FingerLow" "25"
 Option "FingerHigh" "30"
 Option "MaxTapTime" "180"
 Option "MaxTapMove" "220"
 Option "VertScrollDelta" "100"
 Option "MinSpeed" "0.06"
 Option "MaxSpeed" "0.12"
 Option "AccelFactor" "0.0010"
 Option "SHMConfig" "on"
 Option "Repeater" "/dev/input/mice"
EndSection

Section "InputDevice"
  Identifier "PS/2 Mouse"
  Driver "mouse"
  Option "Protocol" "auto"
  Option "Device" "/dev/psaux"
  Option "Emulate3Buttons" "false"
  Option "Emulate3Timeout" "70"
  Option "ZAxisMapping" "4 5"
  Option "Buttons" "5"
EndSection

Section "InputDevice"
  Identifier "USB Mouse"
  Driver "mouse"
  Option "Device" "/dev/input/mice"
  Option "Protocol" "ExplorerPS/2"
  Option "ZAxisMapping" "4 5"
  Option "Buttons" "5"
EndSection

Section "InputDevice"
  Identifier "Stylus"
  Driver "wacom"
  Option "Mode" "Absolute"
  Option "Type" "stylus"
  Option "Device" "/dev/input/wacom"
Endsection

# Settings for wacom eraser
Section "InputDevice"
  Identifier "Eraser"
  Driver "wacom"
  Option "Mode" "Absolute"
  Option "Type" "eraser"
  Option "Device" "/dev/input/wacom"
Endsection
# Settings for wacom cursor (mouse)
Section "InputDevice"
  Identifier "Cursor"
  Driver "wacom"
  Option "Mode" "Absolute"
  Option "Type" "cursor"
  Option "Device" "/dev/input/wacom"
Endsection

Section "Monitor"
  Identifier "Monitor0"
  VendorName "unknown"
  ModelName "unknown"
 #Option "DPMS" "true"
  HorizSync    30.0 - 75.0 # Warning: This may fry old Monitors
  VertRefresh  50.0 - 70.0 # Very conservative. May flicker.
  Modeline "640x480"     25.175 640  664  760  800   480  491  493  525 #60Hz
  Modeline "800x600"     40.12  800  848  968 1056   600  601  605  628 #60Hz
  Modeline "1024x768"    75    1024 1048 1184 1328   768  771  777  806 -hsync -vsync
  Modeline "1024x768"    85    1024 1056 1152 1360   768  784  787  823
  ModeLine "1152x864"    65    1152 1168 1384 1480   864  865  875  985 Interlace
  Modeline "1152x864"    92    1152 1208 1368 1474   864  865  875  895
  Modeline "1152x864"   110    1152 1240 1324 1552   864  864  876  908
  Modeline "1152x864"   135    1152 1464 1592 1776   864  864  876  908
  Modeline "1152x864"   137.65 1152 1184 1312 1536   864  866  885  902 -HSync -VSync
  Modeline "1280x768"    80.14 1280 1344 1480 1680   768  769  772  795
  ModeLine "1280x800"    80.58 1280 1344 1480 1680   800  801  804  827 -HSync -VSync
  Modeline "1280x1024"   80    1280 1296 1512 1568  1024 1025 1037 1165 Interlace
  Modeline "1280x1024"  110    1280 1328 1512 1712  1024 1025 1028 1054
  Modeline "1280x1024"  126.5  1280 1312 1472 1696  1024 1032 1040 1068 -HSync -VSync
  Modeline "1280x1024"  135    1280 1312 1456 1712  1024 1027 1030 1064
  Modeline "1280x1024"  135    1280 1312 1416 1664  1024 1027 1030 1064
  Modeline "1280x1024"  157.5  1280 1344 1504 1728  1024 1025 1028 1072 +HSync +VSync
  Modeline "1280x1024"  181.75 1280 1312 1440 1696  1024 1031 1046 1072 -HSync -VSync
  Modeline "1440x900"   106.47 1440 1520 1672 1904   900  901  904  932 +HSync +VSync
  Modeline "1400x1050"  129    1400 1464 1656 1960  1050 1051 1054 1100 +HSync +VSync
  Modeline "1600x1200"  162    1600 1664 1856 2160  1200 1201 1204 1250 +HSync +VSync
  Modeline "1600x1200"  189    1600 1664 1856 2160  1200 1201 1204 1250 -HSync -VSync
  Modeline "1600x1200"  202.5  1600 1664 1856 2160  1200 1201 1204 1250 +HSync +VSync
  Modeline "1600x1200"  220    1600 1616 1808 2080  1200 1204 1207 1244 +HSync +VSync
  Modeline "1680x1050"  147.14 1680 1784 1968 2256  1050 1051 1054 1087
  ModeLine "1800x1440"  230    1800 1896 2088 2392  1440 1441 1444 1490 +HSync +VSync
  ModeLine "1800x1440"  250    1800 1896 2088 2392  1440 1441 1444 1490 +HSync +VSync
  Modeline "1920x1200"  230    1920 1936 2096 2528  1200 1201 1204 1250 +HSync +VSync
EndSection

Section "Monitor"
  Identifier  "ATIMonitor"
  VendorName "unknown"
  ModelName "unknown"
 #Option "DPMS" "true"
  HorizSync    30.0 - 75.0 # Warning: This may fry old Monitors
  VertRefresh  50.0 - 70.0 # Very conservative. May flicker.
EndSection

Section "Device"
  Identifier  "Card0"
  Driver "radeon"
  BoardName "unknown"

 #BusID  "PCI:1:0:0"
 #Option "sw_cursor" # needed for some ati cards
 #Option "hw_cursor"
 #Option "NoAccel"
 #Option "ShowCache"
 #Option "ShadowFB"
 #Option "UseFBDev"
 #Option "Rotate"
  Option "UseInternalAGPGART" "no"

# savage special options, use with care
 #Option "NoUseBios"
 #Option "BusType" "PCI"
  Option "DmaMode" "None"

# nvidia special options, use with care
  Option "CursorShadow" "1"
  Option "CursorShadowAlpha" "63"
  Option "CursorShadowYOffset" "2"
  Option "CursorShadowXOffset" "4"
  Option "FlatPanelProperties" "Scaling = native"
  Option "NoLogo" "false"
  Option "IgnoreEdid" "true" # needs to be true for some nvidia cards
EndSection

Section "Screen"
  Identifier "Screen0"
  Device "Card0"
  Monitor "Monitor0"
  DefaultColorDepth 16
  
  SubSection "Display"
  Depth 8
  Modes "1024x768" "800x600" "640x480"
  EndSubSection
  SubSection "Display"
  Depth 15
  Modes "1024x768" "800x600" "640x480"
  EndSubSection
  SubSection "Display"
  Depth 16
  Modes "1024x768" "800x600" "640x480"
  EndSubSection
  SubSection "Display"
  Depth 24
  Modes "1024x768" "800x600" "640x480"
  EndSubSection
  SubSection "Display"
  Depth 32
  Modes "1024x768" "800x600" "640x480"
  EndSubSection
  
  # Only the official NVIDIA driver supports twinview
  # these setting are an example
  Option "TwinView" "false"
  Option "SecondMonitorVendorName" "unknown"
  Option "SecondMonitorModelName" "unknown"
  Option "SecondMonitorHorizSync" "30-75"
  Option "SecondMonitorVertRefresh" "50-70"
 #Option "MetaModes" "1024x768, 1024x768"
  Option "TwinViewOrientation" "RightOf"
  Option "ConnectedMonitor" "dfp,dfp"
EndSection

Section "Screen"
  Identifier "ATIScreen"
  Device "Card0"
  Monitor "ATIMonitor"
  DefaultColorDepth 24
  
  SubSection "Display"
  Depth 24
  Modes "1024x768" "800x600" "640x480"
  EndSubSection
EndSection

Section "DRI"
  Mode 0666
EndSection
i hope this is right
Here ya go
 
Old 01-24-2007, 03:24 PM   #4
Visual Basic Imp
LQ Newbie
 
Registered: Apr 2006
Posts: 11

Original Poster
Rep: Reputation: 0
I just tried what you said above
The default value was i think 16, so i went to that subsection and entered "1280x800"
However, when i ran it, it still didnt work. I then checked with another widescreen resolution and found that that resolution, as well, does not work on my computer. The thing is, it should be able to run the widescreen resolutions
Is there some way to fix this?

Thanks for reading this,
DC
 
Old 01-24-2007, 03:30 PM   #5
tekkieman
Member
 
Registered: Dec 2004
Location: Northern CA
Distribution: Mepis 6.5
Posts: 123

Rep: Reputation: 15
I have a laptop running Mepis 6.0 at 1280x800 (at least I think that's what I set ot for). I'll post my xorg.conf here when I get home.
 
Old 01-24-2007, 04:07 PM   #6
Visual Basic Imp
LQ Newbie
 
Registered: Apr 2006
Posts: 11

Original Poster
Rep: Reputation: 0
No need. It turns out all i needed to do was restart my system.
Thanks so much for helping me, everyone! It looks phenomenally better now that the res is back to full settings.

Thanks again,
DC
 
Old 01-27-2007, 12:47 AM   #7
tytower
Member
 
Registered: Jun 2006
Location: Oz
Distribution: Mandriva 10.0,10.1,10.2,2006,Mepis 6.0,Opensuse10.2,Puppy 2.14
Posts: 250

Rep: Reputation: 30
Quote:
Originally Posted by kedar_damle
copy paste the xorg.conf here ...

1> check the section "Screen" if it has a value, "DefaultDepth" and a number with it.
2> Next check SubSection "Display" for that number and place the resolution you want natively in the line. Remove other modes later, once you have the things fine.

Also, what video ram is configured in the BIOS ? Check if it matches the amount of memory in the xorg.conf file. Again, Section "Device" value - VideoRam
I have not seen a "VideoRam" quoted in any of my Xorg configure files
Could you please explain further-I have 16Meg Shared memory for graphics

I attach my xorg.conf file in case it helps


Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
#Screen 0 "ATIScreen" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
#InputDevice "USB Mouse" "CorePointer"
#InputDevice "Touchpad" "CorePointer"
#InputDevice "Stylus" "CorePointer"
#InputDevice "Eraser" "CorePointer"
#InputDevice "Cursor" "CorePointer"
#InputDevice "Serial Mouse" "CorePointer"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection

Section "Files"
# Xorg 7.0 font paths
FontPath "/usr/share/X11/fonts/misc:unscaled"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/util"

# Legacy font paths
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/util"

# Other font paths
FontPath "/usr/share/fonts/truetype/ttf-lucida"
FontPath "/usr/share/fonts/truetype/arphic"
FontPath "/usr/share/fonts/truetype/freefont"
FontPath "/usr/share/fonts/truetype/kochi"
FontPath "/usr/share/fonts/truetype/latex-xft-fonts"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/type1/gsfonts"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"

EndSection

Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "type1"
Load "v4l"
Load "vbe"
Load "synaptics"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XKbOptions" ""
EndSection

Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "false"
Option "Emulate3Timeout" "70"
EndSection

Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
Option "Repeater" "/dev/input/mice"
EndSection

Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "false"
Option "Emulate3Timeout" "70"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection

Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection

Section "InputDevice"
Identifier "Stylus"
Driver "wacom"
Option "Mode" "Absolute"
Option "Type" "stylus"
Option "Device" "/dev/input/wacom"
Endsection

# Settings for wacom eraser
Section "InputDevice"
Identifier "Eraser"
Driver "wacom"
Option "Mode" "Absolute"
Option "Type" "eraser"
Option "Device" "/dev/input/wacom"
Endsection
# Settings for wacom cursor (mouse)
Section "InputDevice"
Identifier "Cursor"
Driver "wacom"
Option "Mode" "Absolute"
Option "Type" "cursor"
Option "Device" "/dev/input/wacom"
Endsection

Section "Monitor"
Identifier "Monitor0"
VendorName "Generic LCD"
ModelName "LCD Panel 1280x1024"
#Option "DPMS" "true"
HorizSync 30.5-82
VertRefresh 56-76
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 #60Hz
Modeline "800x600" 40.12 800 848 968 1056 600 601 605 628 #60Hz
Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
Modeline "1024x768" 85 1024 1056 1152 1360 768 784 787 823
ModeLine "1152x864" 65 1152 1168 1384 1480 864 865 875 985 Interlace
Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895
Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908
Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908
Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync
Modeline "1280x768" 80.14 1280 1344 1480 1680 768 769 772 795
ModeLine "1280x800" 80.58 1280 1344 1480 1680 800 801 804 827 -HSync -VSync
Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace
Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054
Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync
Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064
Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064
Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync
Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync
Modeline "1440x900" 106.47 1440 1520 1672 1904 900 901 904 932 +HSync +VSync
Modeline "1400x1050" 129 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync
Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VSync
Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync
Modeline "1680x1050" 147.14 1680 1784 1968 2256 1050 1051 1054 1087
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
Modeline "1920x1200" 230 1920 1936 2096 2528 1200 1201 1204 1250 +HSync +VSync
EndSection

Section "Monitor"
Identifier "ATIMonitor"
VendorName "Generic LCD"
ModelName "LCD Panel 1280x1024"
#Option "DPMS" "true"
HorizSync 30.5-82
VertRefresh 56-76
EndSection

Section "Device"
Identifier "Card0"
Driver "sis"
BoardName "unknown"

#BusID "PCI:1:0:0"
#Option "sw_cursor" # needed for some ati cards
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
Option "UseInternalAGPGART" "no"

# savage special options, use with care
#Option "NoUseBios"
#Option "BusType" "PCI"
Option "DmaMode" "None"

# nvidia special options, use with care
Option "CursorShadow" "1"
Option "CursorShadowAlpha" "63"
Option "CursorShadowYOffset" "2"
Option "CursorShadowXOffset" "4"
Option "FlatPanelProperties" "Scaling = native"
Option "NoLogo" "false"
Option "IgnoreEdid" "true" # needs to be true for some nvidia cards
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16

SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768"
EndSubSection
SubSection "Display"
Depth 32
Modes "1280x1024" "1024x768"
EndSubSection

# Only the official NVIDIA driver supports twinview
# these setting are an example
Option "TwinView" "false"
Option "SecondMonitorVendorName" "unknown"
Option "SecondMonitorModelName" "unknown"
Option "SecondMonitorHorizSync" "30-75"
Option "SecondMonitorVertRefresh" "50-70"
#Option "MetaModes" "1024x768, 1024x768"
Option "TwinViewOrientation" "RightOf"
Option "ConnectedMonitor" "dfp,dfp"
EndSection

Section "Screen"
Identifier "ATIScreen"
Device "Card0"
Monitor "ATIMonitor"
DefaultColorDepth 24

SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768"
EndSubSection
EndSection

Section "DRI"
Mode 0666
EndSection
Last edited by tytower; 01-27-2007 at 12:49 AM.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Question about screen resolution JAKK Linux - Laptop and Netbook 3 12-24-2006 04:56 PM
Screen Resolution question BigAL2006 Linux - Newbie 1 09-15-2006 05:23 AM
Screen Resolution Question drakelord Linux - Newbie 5 09-12-2006 01:04 AM
default screen resolution smaller than max. resolution ?? Thoddy Linux - General 2 11-10-2005 01:33 AM
question about screen resolution OsirisX Linux - Software 1 01-17-2005 04:25 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > MEPIS

All times are GMT -5. The time now is 01:52 PM.

Contact Us - Advertising Info - Rules - Privacy - LQ Merchandise - Donations - Contributing Member - LQ Sitemap -
Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration