Rezound loads in the sound file but when I try to play the file I get 'sound player not initialised'.Similar also happens with Audacity yet Amorak and cd's plays ok .
Grateful for any help.

Dave

Did you get xmms to work?

Amarok is KDE's player and KDE uses aRts as it's sound system (or at least used to).
I think you still haven't got ALSA working (and Rezound and Audacity uses ALSA/OSS).

- Peder

Hello agian Pedar.

Well I got Amorak working,dont know how.But now it as stopped again and Audacity etc wont work either.Alsaplayer is now working and I have the GUI in the shell.Dont know about OSS.

Dave

Try running 'draksound' and see if you can configure anything (also read the help there).
Also post the info in /var/log/dmesg and the output of 'lsmod' (run it as root) after a reboot.

- Peder

Hello Pedar

Here is lsmod paste
[root@TISCALI david]# lsmod
Module Size Used by
ppp_deflate 4736 0
zlib_deflate 22392 1 ppp_deflate
bsd_comp 5152 0
ipt_state 1408 2
ip_conntrack 28616 1 ipt_state
iptable_filter 2080 1
ip_tables 14624 2 ipt_state,iptable_filter
md5 3584 1
ipv6 230916 8
rfcomm 32348 0
l2cap 19876 5 rfcomm
bluetooth 39076 4 rfcomm,l2cap
lp 9548 0
parport_pc 30976 1
parport 33896 2 lp,parport_pc
usblp 10592 0
snd-seq-midi 6624 0
snd-seq-oss 31232 0
snd-seq-midi-event 6080 2 snd-seq-midi,snd-seq-oss
snd-seq 47440 5 snd-seq-midi,snd-seq-oss,snd-seq-midi-event
snd-pcm-oss 49480 0
snd-mixer-oss 17376 1 snd-pcm-oss
snd-ens1371 18980 1
snd-rawmidi 19300 2 snd-seq-midi,snd-ens1371
snd-seq-device 6344 4 snd-seq-midi,snd-seq-oss,snd-seq,snd-rawmidi
snd-pcm 81800 2 snd-pcm-oss,snd-ens1371
snd-timer 20356 2 snd-seq,snd-pcm
snd-page-alloc 7400 1 snd-pcm
snd-ac97-codec 69392 1 snd-ens1371
gameport 3328 1 snd-ens1371
snd 45988 12 snd-seq-oss,snd-seq,snd-pcm-oss,snd-mixer-oss,snd-ens1371,snd-rawmidi,snd-seq-device,snd-pcm,snd-timer,snd-ac97-codec
soundcore 7008 1 snd
ppp_async 8896 1
ppp_generic 24468 7 ppp_deflate,bsd_comp,ppp_async
slhc 6112 1 ppp_generic
crc-ccitt 1664 1 ppp_async
af_packet 16072 0
floppy 55088 0
ide-cd 37280 1
cdrom 37724 1 ide-cd
loop 12520 0
nls_iso8859-15 4224 1
nls_cp850 4480 1
vfat 11168 1
fat 39776 1 vfat
intel-agp 19584 1
agpgart 27752 1 intel-agp
ehci-hcd 26244 0
ohci-hcd 18468 0
uhci-hcd 28752 0
usbcore 103172 6 usblp,ehci-hcd,ohci-hcd,uhci-hcd
ext3 120680 2
jbd 49080 1 ext3
I will look for draksound and get other info to.

Hello again Pedar here is the dmseg info you requested.Sorry for delay.
[root@localhost log]# dmesg
Linux version 2.6.8.1-12mdk (quintela@n5.mandrakesoft.com) (gcc version 3.4.1 (Mandrakelinux (Alpha 3.4.1-3mdk)) #1 Fri Oct 1 12:53:41 CEST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
BIOS-e820: 000000000bff0000 - 000000000bff3000 (ACPI NVS)
BIOS-e820: 000000000bff3000 - 000000000c000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
191MB LOWMEM available.
On node 0 totalpages: 49136
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 45040 pages, LIFO batch:10
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI disabled because your bios is from 99 and too old
You can enable it with acpi=force
Built 1 zonelists
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Kernel command line: BOOT_IMAGE=linux ro root=345 acpi=ht resume=/dev/hdb6 splash=silent
bootsplash: silent mode.
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 451.177 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 190928k/196544k available (1859k kernel code, 4984k reserved, 578k data, 200k init, 0k highmem, 0k BadRAM)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 890.88 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000
CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU serial number disabled.
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Katmai) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
init init/main.c:689
init init/main.c:702
init init/main.c:707
do_pre_smp_initcalls init/main.c:653
do_pre_smp_initcalls init/main.c:659
init init/main.c:711
init init/main.c:714
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 450.0958 MHz.
..... host bus clock speed is 100.0212 MHz.
init init/main.c:716
init init/main.c:718
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
ACPI: Looking for DSDT in initrd ... not found!
Freeing initrd memory: 171k freed
init init/main.c:724
do_basic_setup init/main.c:634
do_basic_setup init/main.c:636
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb420, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Disabled
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
vesafb: framebuffer at 0xe4000000, mapped to 0xcc800000, size 1875k
vesafb: mode is 800x600x16, linelength=1600, pages=7
vesafb: protected mode interface info at c000:4785
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
audit(1107787540.4294966260:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
bootsplash 3.1.6-2004/03/31: looking for picture.... silentjpeg size 14554 bytes, found (800x600, 14506 bytes, v3).
Console: switching to colour frame buffer device 92x32
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
PCI: Found IRQ 10 for device 0000:00:0d.0
PCI: Sharing IRQ 10 with 0000:00:07.2
ttyS4 at I/O 0x6c00 (irq = 10) is a 16550A
ttyS5 at I/O 0x6c08 (irq = 10) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hdaMA, hdbMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdcMA, hddMA
Probing IDE interface ide0...
hda: FUJITSU MPC3064AT, ATA DISK drive
hdb: ST340014A, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HITACHI DVD-ROM GD-2500, ATAPI CD/DVD-ROM drive
hdd: RICOH CD-R/RW MP7080A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 12672450 sectors (6488 MB), CHS=13410/15/63, UDMA(33)
/dev/ide/host0/bus0/target0/lun0: p1
hdb: max request size: 1024KiB
hdb: Host Protected Area detected.
current capacity is 66055248 sectors (33820 MB)
native capacity is 78165360 sectors (40020 MB)
hdb: 66055248 sectors (33820 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(33)
/dev/ide/host0/bus0/target1/lun0: p1[DM] p2 < p5 p6 p7 p8 >
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: PS2++ Logitech Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 1
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
init init/main.c:726
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 200k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 10 for device 0000:00:07.2
PCI: Sharing IRQ 10 with 0000:00:0d.0
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: irq 10, io base 00006400
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
EXT3 FS on hdb5, internal journal
Adding 1124508k swap on /dev/hdb6. Priority:-1 extents:1
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: Maximum main memory to use for agp memory: 149M
agpgart: AGP aperture is 64M @ 0xe0000000
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
loop: loaded (max 8 devices)
hdc: ATAPI 24X DVD-ROM drive, 512kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache, DMA
bootsplash 3.1.6-2004/03/31: looking for picture.... silentjpeg size 14554 bytes, found (800x600, 14506 bytes, v3).
bootsplash: status on console 0 changed to on
inserting floppy driver for 2.6.8.1-12mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET: Registered protocol family 17
PCI: Found IRQ 11 for device 0000:00:0b.0
Bluetooth: Core ver 2.6
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.3
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM ver 1.3
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0322b60(lo)
IPv6 over IPv4 tunneling driver
mtrr: 0xe4000000,0x800000 overlaps existing 0xe4000000,0x100000
mtrr: 0xe4000000,0x800000 overlaps existing 0xe4000000,0x100000
cdrom: This disc doesn't have any tracks I recognize!
cdrom: This disc doesn't have any tracks I recognize!
wait source ready timeout 0x6810 [0xffffffff]
wait source ready timeout 0x6810 [0xffffffff]
wait source ready timeout 0x6810 [0xffffffff]
wait source ready timeout 0x6810 [0xffffffff]
wait source ready timeout 0x6810 [0xffffffff]
wait source ready timeout 0x6810 [0xffffffff]
wait source ready timeout 0x6810 [0xffffffff]
wait source ready timeout 0x6810 [0xffffffff]
wait source ready timeout 0x6810 [0xffffffff]
wait source ready timeout 0x6810 [0xffffffff]
wait source ready timeout 0x6810 [0xffffffff]
wait source ready timeout 0x6810 [0xffffffff]
wait source ready timeout 0x6810 [0xffffffff]
wait source ready timeout 0x6810 [0xffffffff]
wait source ready timeout 0x6810 [0xffffffff]
wait source ready timeout 0x6810 [0xffffffff]
wait source ready timeout 0x6810 [0xffffffff]
wait source ready timeout 0x6810 [0xffffffff]
wait source ready timeout 0x6810 [0xffffffff]
wait source ready timeout 0x6810 [0xffffffff]
wait source ready timeout 0x6810 [0xffffffff]
wait source ready timeout 0x6810 [0xffffffff]
wait source ready timeout 0x6810 [0xffffffff]
wait source ready timeout 0x6810 [0xffffffff]
wait source ready timeout 0x6810 [0xffffffff]
wait source ready timeout 0x6810 [0xffffffff]
wait source ready timeout 0x6810 [0xffffffff]
wait source ready timeout 0x6810 [0xffffffff]
wait source ready timeout 0x6810 [0xffffffff]
wait source ready timeout 0x6810 [0xffffffff]
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (1535 buckets, 12280 max) - 328 bytes per conntrack
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 5 changed to on
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
SCSI subsystem initialized
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: Printer, HEWLETT-PACKARD DESKJET 930C
lp0: using parport0 (polling).
lp0: console ready
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: Printer, HEWLETT-PACKARD DESKJET 930C
lp0: using parport0 (polling).
lp0: console ready
codec write timeout at 0x6814 [0xffffffff]
[root@localhost log]#

Did the info from draksound get you anywhere?
Especially the 'lspcidrake | grep AUDIO' should be interresting since you seem to have
all the right alsa modules loaded and we've established that you have a /dev/dsp
that you "own" and have r/w permissions

Start rezound and (as root) run ' lsof | grep rezound | grep dev' you should see something like
- Peder

Hello Peder.Here is output of two commands-

[root@localhost david]# 'lspcidrake | grep AUDIO
>
[root@localhost david]# rezound
using path '/usr/share/rezound' for share data directory
Warning: You do not have a LADSPA_PATH environment variable set.
Error occurred while initializing audio output method 'oss' -- virtual void COSS SoundPlayer::initialize() -- error opening OSS device '/dev/dsp -- Device or res ource busy
Error occurred while initializing audio output method 'jack' -- virtual void CJA CKSoundPlayer::initialize() -- error connecting to jack server -- jackd not runn ing?
'lame' executable not found in $PATH -- mp3 support will be disabled
warning: error returned by read() function -- Input/output error
[root@localhost david]#

Will get lsof info but lsof command not recognised by system.

Thanks

Dave

Hello again Peder here is lspcidrake command

[root@localhost david]# lspcidrake -v fgrep AUDIO
intel-agp : Intel Corp.|440BX/ZX - 82443BX/ZX Host bridge [BRIDGE_HOST] (v endor:8086 device:7190)
unknown : Intel Corp.|440BX/ZX - 82443BX/ZX AGP bridge [BRIDGE_PCI] (ven dor:8086 device:7191)
unknown : Intel Corp.|82371AB PIIX4 ISA [BRIDGE_ISA] (vendor:8086 device :7110)
unknown : Intel Corp.|82371AB PIIX4 IDE [STORAGE_IDE] (vendor:8086 devic e:7111)
usb-uhci : Intel Corp.|82371AB PIIX4 USB [SERIAL_USB] (vendor:8086 device :7112)
sonypi : Intel Corp.|82371AB PIIX4 ACPI - Bus Master IDE Controller [BR IDGE_OTHER] (vendor:8086 device:7113)
snd-ens1371 : Creative Labs|Sound Blaster AudioPCI64V/AudioPCI128 [MULTIMEDI A_AUDIO] (vendor:1274 device:1371)
unknown : Timedia Technology Co Ltd|Multi I/O card [COMMUNICATION_SERIAL ] (vendor:1409 device:7168 subv:1409 subd:5079)
Card:ATI Mach64 Utah: ATI|3D Rage Pro AGP 1X/2X [DISPLAY_VGA] (vendor:1002 devic e:4742 subv:1002 subd:0084)
hub : Linux 2.6.8.1-12mdk uhci_hcd|UHCI Host Controller [Hub] (vendo r:0000 device:0000)

Regards

Dave

You forgot the pipe sign "|" in ' lspcidrake -v | fgrep AUDIO' but nevermind.
As you can see the system has identified your sound card:
"snd-ens1371 : Creative Labs|Sound Blaster AudioPCI64V/AudioPCI128 [MULTIMEDI A_AUDIO]"

I think I found (some of) your problem: You have started jack as root.

If I do that and start rezound (as peder) I get the same error as you.
Do a 'ps ax | grep jack' and see if you have any jackd running. If you have, su to root and kill it ('killall jackd')
Try starting rezound again as your normal user.

Now xine, ardour and whatever should work.


- Peder

Peder here is what I got
[david@localhost david]$ ps ax | grep jack
4976 pts/1 R+ 0:00 grep jack
[david@localhost david]$ su
Password:
[root@localhost david]# killall jackd
jackd: no process killed
[root@localhost david]


Dave

And if you start rezound do you still get the errors concerning jack and OSS?

Close all your running programs, do a 'ps ax' and post the result.


If you can, try this (to circumvent any KDE sound problem) :

Edit /etc/inittab (as root) and change "id:5:initdefault:" to "id:3:initdefault:" (if it's not already 3)
Type (as root) 'urpmi icewm-light ; urpmi xterm' (you will probably have everything installed already)
Type (as david) 'mv ~/.xinitrc ~/.xinitrc.org ; echo icewm-light > ~/.xinitrc'
Reboot and log in as your normal user.
Type 'startx'

Klick the IceWM start button, go to System/Terminals and start an xterm. Try running rezound.
Report any errors.

- Peder

Peder
I get the same errors wiyh rezound.
david@localhost david]$ ps ax
PID TTY STAT TIME COMMAND
1 ? S 0:02 init [5]
2 ? SN 0:00 [ksoftirqd/0]
3 ? S< 0:00 [events/0]
4 ? S< 0:00 [khelper]
5 ? S< 0:00 [kblockd/0]
28 ? S 0:00 [kapmd]
30 ? S 0:00 [pdflush]
31 ? S 0:00 [pdflush]
33 ? S< 0:00 [aio/0]
32 ? S 0:00 [kswapd0]
144 ? S 0:00 [kseriod]
272 ? S 0:00 [kjournald]
403 ? S<s 0:00 udevd
802 ? S 0:00 [khubd]
957 ? S 0:00 [kjournald]
2509 ? Ss 0:00 portmap
2533 ? Ss 0:00 syslogd -m 0
2541 ? Ss 0:00 klogd -2
2623 ? Ss 0:00 cupsd
3077 ? Ss 0:00 xfs -port -1 -daemon -droppriv -user xfs
3114 ? Ss 0:00 dbus-daemon-1 --system
3139 ? Ss 0:00 hcid: processing events
3150 ? Ss 0:00 sdpd
3162 ? S< 0:00 [krfcommd]
3242 ? S 0:00 /usr/bin/mdkkdm -nodaemon
3244 ? Ss 0:00 /usr/sbin/atd
3270 ? S 2:40 /etc/X11/X -deferglyphs 16 -auth /var/run/xauth/A:0-K
3271 ? Ss 0:00 saslauthd -a pam
3279 ? S 0:00 saslauthd -a pam
3280 ? S 0:00 saslauthd -a pam
3281 ? S 0:00 saslauthd -a pam
3282 ? S 0:00 saslauthd -a pam
3301 ? S 0:00 -:0
3361 ? Ss 0:00 xinetd -stayalive -reuse -pidfile /var/run/xinetd.pid
3464 ? Ss 0:00 clamd -c /etc/clamd.conf
3522 ? Ss 0:00 /usr/bin/freshclam --config-file=/etc/freshclam.conf
3558 ? S 0:00 /bin/sh /usr/bin/startkde
3609 ? S 0:00 /usr/bin/bluez-pin --dbus
3613 ? S 0:06 /usr/bin/perl /usr/bin/mdkapplet
3625 ? S 0:08 /usr/bin/perl /usr/bin/net_applet
3645 ? S 0:00 dbus-launch --sh-syntax --exit-with-session
3646 ? Ss 0:00 dbus-daemon-1 --fork --print-pid 8 --print-address 6
3657 ? Ss 0:00 s2u --daemon=yes
3664 ? S 0:01 magicdev
3681 ? S 0:00 /usr/lib/gconfd-2 13
3689 ? Ss 0:00 kdeinit: Running...
3692 ? S 0:00 kdeinit: dcopserver --nosid
3694 ? S 0:00 kdeinit: klauncher
3697 ? S 0:02 kdeinit: kded
3701 ? Ss 0:01 famd
3712 ? S 0:00 /usr/bin/artsd -F 10 -S 4096 -s 1 -m artsmessage -c d
3717 ? S 0:01 kdeinit: knotify
3721 ? S 0:00 kwrapper ksmserver
3723 ? S 0:00 kdeinit: ksmserver
3724 ? S 0:02 kdeinit: kwin -session 117f00000100011052914070000004
3726 ? S 0:03 kdeinit: kdesktop
3731 ? S 0:07 kdeinit: kicker
3732 ? S 0:00 kdeinit: kio_file file /tmp/ksocket-david/klauncherDG
3745 ? S 0:00 kdeinit: khotkeys
3747 ? S 0:00 kdeinit: kwrited
3748 ? Sl 0:00 /usr/lib/evolution/2.0/evolution-alarm-notify --sm-co
3750 ? S 0:01 kdeinit: kmix -session 117f00000100011052914130000004
3752 ? Ss 0:00 /usr/lib/bonobo-activation-server --ac-activate --ior
3758 ? Sl 0:00 /usr/lib/evolution-data-server-1.0 --oaf-activate-iid
3761 ? S 0:01 kwikdisk -session 117f0000010001105291414000000404500
3775 ? S 0:01 korgac --miniicon korganizer
3777 ? S 0:00 krandrtray -session 117f00000100011052914140000004045
3782 ? S 0:03 kscd -session 117f000001000110538365200000033980005_1
3797 ? S 0:00 kalarmd --login
3807 ? S 0:01 kalarm -session 117f000001000110750781300000041320006
3962 ? Ss 0:00 sendmail: accepting connections
4042 ? Ss 0:00 sendmail: Queue runner@01:00:00 for /var/spool/client
4326 ? Ss 0:00 crond
4429 tty1 Ss+ 0:00 /sbin/mingetty tty1
4430 tty2 Ss+ 0:00 /sbin/mingetty tty2
4431 tty3 Ss+ 0:00 /sbin/mingetty tty3
4432 tty4 Ss+ 0:00 /sbin/mingetty tty4
4433 tty5 Ss+ 0:00 /sbin/mingetty tty5
4442 tty6 Ss+ 0:00 /sbin/mingetty tty6
6500 ? S 0:01 kdeinit: konsole
6505 pts/1 Ss 0:00 /bin/bash
6573 pts/1 R+ 0:00 ps ax
[david@localhost david]$


Cheers

Dave

Peder

Got everything installed reply.
Running under Ice i get

Warning you do not have LADSPA_PATH environment variable set.'lame' executable not found in $PATH

ie same as under KDE


Dave

The LADSPA and lame errors are just warnings meaning you don't have access to any LADSPA filters and you
can't play MP3's in rezound. Did you try playing any .wav ? There should be plenty in /usr/share/sounds/.
Did you try playing anything in ardour or xmms under Ice ?

From your 'ps ax' I can see you're running artsd in KDE and I think that's the culprit. You could try disabling that
by doing something similar to this (nicked from http://lists.debian.org/debian-user/.../msg03653.html)
And I really don't know how you managed to get the "jack" error, if not as I described.

- Peder