NVIDIA Geforce Go5600 driver help

andy1 · 10-24-2004, 09:38 AM

Ok I installed the nvidia 6111 driver but when I start it up it doesn't work but then i found a command that says do modprobe nvidia so i did that and this time it just stays in a black screen. Anyone know how to get this working. (i also have configured my XF86Config-4 so nv is to nvidia and glx is in there too).

Here's my XF86Config-4 file to take a look at.

Code:

# File generated by XFdrake.

# **********************************************************************
# Refer to the XF86Config man page for details about the format of
# this file.
# **********************************************************************

Section "Files"
    # Multiple FontPath entries are allowed (they are concatenated together)
    # By default, Mandrake 6.0 and later now use a font server independent of
    # the X server to render fonts.
    FontPath "unix/:-1"
EndSection

Section "ServerFlags"
    #DontZap # disable <Crtl><Alt><BS> (server abort)
    AllowMouseOpenFail # allows the server to start up even if the mouse doesn't work
    #DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
EndSection

Section "Module"
    Load "dbe" # Double-Buffering Extension
    Load "v4l" # Video for Linux
    Load "extmod"
    Load "type1"
    Load "freetype"
    Load "glx" # 3D layer
EndSection

Section "InputDevice"
    Identifier "Keyboard1"
    Driver "Keyboard"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "en_US"
    Option "XkbOptions" ""
EndSection

Section "InputDevice"
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "ExplorerPS/2"
    Option "Device" "/dev/mouse"
    Option "ZAxisMapping" "6 7"
EndSection

Section "Monitor"
    Identifier "monitor1"
    VendorName "Generic"
    ModelName "1024x768 @ 60 Hz"
    HorizSync 31.5-48.5
    VertRefresh 50-70
    
    # Sony Vaio C1(X,XS,VE,VN)?
    # 1024x480 @ 85.6 Hz, 48 kHz hsync
    ModeLine "1024x480"    65.00 1024 1032 1176 1344   480  488  494  563 -hsync -vsync
    
    # TV fullscreen mode or DVD fullscreen output.
    # 768x576 @ 79 Hz, 50 kHz hsync
    ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
    
    # 768x576 @ 100 Hz, 61.6 kHz hsync
    ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616
EndSection

Section "Device"
    Identifier "device1"
    BoardName "NVIDIA GeForce FX (generic)"
    Driver "nv"
    Option "DPMS"
EndSection

Section "Screen"
    Identifier "screen1"
    Device "device1"
    Monitor "monitor1"
    DefaultColorDepth 16
    
    Subsection "Display"
        Depth 8
        Virtual 1024 768
    EndSubsection
    
    Subsection "Display"
        Depth 15
        Virtual 1024 768
    EndSubsection
    
    Subsection "Display"
        Depth 16
        Virtual 1024 768
    EndSubsection
    
    Subsection "Display"
        Depth 24
        Virtual 1024 768
    EndSubsection
EndSection

Section "ServerLayout"
    Identifier "layout1"
    InputDevice "Keyboard1" "CoreKeyboard"
    InputDevice "Mouse1" "CorePointer"
    Screen "screen1"
EndSection

Caeda · 10-24-2004, 09:53 AM

How about actually reading the readme file that comes with the driver? And following the instructions. Since your XF86Config file still reads "Driver "nv"", you obviously didn't read it.

andy1 · 10-24-2004, 09:56 AM

Sorry I took the nvidia driver off so I could get an answer about this it was nvidia before but I had to change it to startx