Mandrake and nForce2 probs!

OverrRyde · 05-13-2004, 11:42 AM

Hey guys, ive search this on the forums but didnt find!

I have an A7N8X moboand when i installed 9.2, my sound card was working well but not my ethernet card... so i serach and found a "walkthrough" by SpiritAuthor here...

ok well, my LAN is now working perfeectly, but no sound now!

has anyone had this prob? if so how can i fix this? I install kernel-sourc-2.4.22-10mdk.i586.rpm and nvidia_nforce-1.0-0261.src.rpm

Thanks for the help!

colnago · 05-13-2004, 12:43 PM

Sound can be tricky. lsmod to make sure the sound modules are loaded. Set the volumes in either 1->the comand line with alsamixer or 2->gui kmix. Make sure the speaker volume is up and the source volume is up. If you are using kde, go into the control centre and set the sound system to use alsa instead of auto and make sure it is enabled too.

fancypiper · 05-13-2004, 01:21 PM

When a new kernel is installed, the drivers you installed for the old kernel have to be re-compiled for the new 'un.

Some guides to common tasks asked about here.
# Compiling/installing kernel modules
You will need to have installed:
1. The developmental packages (compiler)
2. The kernel-source code that matches your running kernel
3. The module source or install code

Check out your system and look under the hood and see if you installed the stuff you need to do the job. Open an x terminal and type in this sequence of commands to see what kernel we are running and see if you have the kernel source installed:

Code:

[fancy@tinwhistle fancy]$ su -
Password:
[root@tinwhistle root]# uname -r
2.4.20-28.7

I am running kernel version 2.4.20-28.7. Do I have the proper source code?

Code:

[root@tinwhistle root]# cd /usr/src
[root@tinwhistle src]# ls -alc
total 3
drwxr-xr-x    4 root     root          136 Jun 12 14:53 .
drwxr-xr-x   16 root     root          424 Jun  4 12:04 ..
lrwxrwxrwx    1 root     root           14 Jun  4 12:11 linux-2.4 -> linux-2.4.20-28.7
drwxr-xr-x   16 root     root          584 Jun  4 12:11 linux-2.4.20-28.7
drwxr-xr-x    7 root     root          168 Jun  4 12:08 redhat
[root@tinwhistle src]#

I do have the same kernel version source code installed in the directory /usr/src/linux-2.4.20-28.7 and there is a symbolic link named linux-2.4 pointing to it.

If you don't see something similiar to this (but in color), you will need to install the kernel source.

NOTE: I noticed that Red Hat didn't make the symbolic link /usr/src/linux that all of the INSTALL files that I have read mentioned that I need. I may as well make one now to save editing the files in the source code every time I need to compile anything concerning the kernel. So, I'll make that link just now:

Code:

[root@tinwhistle src]# ln -s linux-2.4.20-28.7 linux         
[root@tinwhistle src]# ls -alc
total 3
drwxr-xr-x    4 root     root          160 Jun 12 15:46 .
drwxr-xr-x   16 root     root          424 Jun  4 12:04 ..
lrwxrwxrwx    1 root     root           14 Jun 12 15:46 linux -> linux-2.4.20-28.7
lrwxrwxrwx    1 root     root           14 Jun  4 12:11 linux-2.4 -> linux-2.4.20-28.7
drwxr-xr-x   16 root     root          584 Jun  4 12:11 linux-2.4.20-28.7
drwxr-xr-x    7 root     root          168 Jun  4 12:08 redhat
[root@tinwhistle src]#

Ah, there it is, so that's done.

Next, did I install the compiler?

Code:

[root@tinwhistle src]# gcc -v          
Reading specs from /usr/lib/gcc-lib/i386-redhat-linux/2.96/specs
gcc version 2.96 20000731 (Red Hat Linux 7.3 2.96-113)
[root@tinwhistle src]#

Yes, I have a compiler installed.

If you don't have those two things installed, you have to install them first off your install CD.

If they are installed, download the source and happy compiling.

Make sure you carefully read the README and INSTALL files after extracting and before compiling/installing.