Mandrake 10 won't boot to KDE

MisterGoof · 08-16-2004, 06:05 PM

Please be gentle with me as I'm new this Linux stuff.

I have installed Mandrake 10 onto 2 partitions on a WINXP PC

After the install, where all seems to go OK, the PC Reboots and I get the lilo menu.

I select Linux
Get the Mandrake Splash Screen
THe KDE part comes up, It gets to 85% and then stops, after about 1 minute the screen goes blue and thats it nothing.

I reboot back to Linux, this time KDE comes up, but without desktop ICONS, play for a bit and shutdown. shutdown fails to complete so I reboot.

It does some repairing because of an unmounted partition, and reboots
Back to Linux again, this time KDE gets to 28% and stops, nothing for 1 minute then blue screen

I reboot again, back to Linux, this time gets to 85% with a message box saying Knotify (sp?) failed to install, I choose try again, nothing happens
I Reboot again, back to Linux, KDE to 85 % get the same message box select something about "arts" (sp?), again nothing happens.

I have now installed 3 times and I get exactly same sequence of events

What am I doing Wrong ?

pingu · 08-17-2004, 03:52 AM

The first thing to do is to boot into text-mode, 'init 3'.
Try at the bootprompt:
linux init=3

If it doesn't work, when KDE stops you can probably switch to a text-console by pressing
[ctrl]+[alt]+[F1]
Once there, start with taking a look at the logs. Post it here:
# cat /var/log/XFree86.log
there could be a number there too, just type 'XF' and hit tab, you'll see the possible names

MisterGoof · 08-17-2004, 03:21 PM

Pingu,

I did what you suggested, waited untill KDE faild to load then ctrl + alt + f1
then the cat command on XFree86.log

How do I store that somewhere so I can post to this Forum ?

Sorry if this seems such a daft question but I'm really new to the Stuff.

TIA

MG

MisterGoof · 08-17-2004, 04:04 PM

OK worked out how to access it. I just used patrition magic

Quote:

This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).

XFree86 Version 4.3.0.1
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.3-3mdkenterprise i686 [ELF]
Build Date: 24 March 2004
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Aug 17 21:34:53 2004
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "layout1"
(**) |-->Screen "screen1" (0)
(**) | |-->Monitor "monitor1"
(**) | |-->Device "device1"
(**) |-->Input Device "Keyboard1"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "gb"
(**) XKB: layout: "gb"
(WW) Option "XkbOptions" requires an string value
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Mouse1"
(**) FontPath set to "unix/:-1"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail"
Using vt 7
(--) using VT number 7

(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8002382c, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2530 card 1028,0145 rev 04 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2532 card 0000,0000 rev 04 class 06,04,00 hdr 01
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 04 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,2440 card 0000,0000 rev 04 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,244b card 1028,0145 rev 04 class 01,01,80 hdr 00
(II) PCI: 00:1f:3: chip 8086,2443 card 1028,0145 rev 04 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0172 card 10de,015a rev a3 class 03,00,00 hdr 00
(II) PCI: 02:01:0: chip 1106,3038 card 0925,1234 rev 50 class 0c,03,00 hdr 80
(II) PCI: 02:01:1: chip 1106,3038 card 0925,1234 rev 50 class 0c,03,00 hdr 80
(II) PCI: 02:01:2: chip 1106,3104 card 0925,1234 rev 51 class 0c,03,20 hdr 80
(II) PCI: 02:02:0: chip 1106,3038 card 0925,1234 rev 50 class 0c,03,00 hdr 80
(II) PCI: 02:02:1: chip 1106,3038 card 0925,1234 rev 50 class 0c,03,00 hdr 80
(II) PCI: 02:02:2: chip 1106,3104 card 0925,1234 rev 51 class 0c,03,20 hdr 80
(II) PCI: 02:07:0: chip 1102,0006 card 1102,1003 rev 00 class 04,01,00 hdr 80
(II) PCI: 02:07:1: chip 1102,7004 card 1102,1003 rev 00 class 09,80,00 hdr 80
(II) PCI: 02:08:0: chip 14e4,4212 card 1028,0002 rev 02 class 07,03,00 hdr 00
(II) PCI: 02:0c:0: chip 8086,1229 card 1028,0145 rev 10 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[1] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[2] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[3] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xfe100000 - 0xfe2fffff (0x200000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation NV17 [GeForce4 MX 420] rev 163, Mem @ 0xfc000000/24, 0xf4000000/26, 0xf3f80000/19, BIOS @ 0x80000000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe8000000 from 0xefffffff to 0xe7ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xfe1c0000 - 0xfe1dffff (0x20000) MX[B]
[1] -1 0 0xfe1fd000 - 0xfe1fdfff (0x1000) MX[B]
[2] -1 0 0xfe1fe000 - 0xfe1fefff (0x1000) MX[B]
[3] -1 0 0xfe1ff800 - 0xfe1ff8ff (0x100) MX[B]
[4] -1 0 0xfe1ffc00 - 0xfe1ffcff (0x100) MX[B]
[5] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[6] -1 0 0x80000000 - 0x8001ffff (0x20000) MX[B](B)
[7] -1 0 0xf3f80000 - 0xf3ffffff (0x80000) MX[B](B)
[8] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
[9] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[10] -1 0 0x0000ec00 - 0x0000ec3f (0x40) IX[B]
[11] -1 0 0x0000ec40 - 0x0000ec4f (0x10) IX[B]
[12] -1 0 0x0000ec58 - 0x0000ec5f (0x8) IX[B]
[13] -1 0 0x0000ec60 - 0x0000ec7f (0x20) IX[B]
[14] -1 0 0x0000ec80 - 0x0000ec9f (0x20) IX[B]
[15] -1 0 0x0000eca0 - 0x0000ecbf (0x20) IX[B]
[16] -1 0 0x0000ecc0 - 0x0000ecdf (0x20) IX[B]
[17] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B]
[18] -1 0 0x0000dcf0 - 0x0000dcff (0x10) IX[B]
[19] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfe1c0000 - 0xfe1dffff (0x20000) MX[B]
[1] -1 0 0xfe1fd000 - 0xfe1fdfff (0x1000) MX[B]
[2] -1 0 0xfe1fe000 - 0xfe1fefff (0x1000) MX[B]
[3] -1 0 0xfe1ff800 - 0xfe1ff8ff (0x100) MX[B]
[4] -1 0 0xfe1ffc00 - 0xfe1ffcff (0x100) MX[B]
[5] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[6] -1 0 0x80000000 - 0x8001ffff (0x20000) MX[B](B)
[7] -1 0 0xf3f80000 - 0xf3ffffff (0x80000) MX[B](B)
[8] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
[9] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[10] -1 0 0x0000ec00 - 0x0000ec3f (0x40) IX[B]
[11] -1 0 0x0000ec40 - 0x0000ec4f (0x10) IX[B]
[12] -1 0 0x0000ec58 - 0x0000ec5f (0x8) IX[B]
[13] -1 0 0x0000ec60 - 0x0000ec7f (0x20) IX[B]
[14] -1 0 0x0000ec80 - 0x0000ec9f (0x20) IX[B]
[15] -1 0 0x0000eca0 - 0x0000ecbf (0x20) IX[B]
[16] -1 0 0x0000ecc0 - 0x0000ecdf (0x20) IX[B]
[17] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B]
[18] -1 0 0x0000dcf0 - 0x0000dcff (0x10) IX[B]
[19] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfe1c0000 - 0xfe1dffff (0x20000) MX[B]
[6] -1 0 0xfe1fd000 - 0xfe1fdfff (0x1000) MX[B]
[7] -1 0 0xfe1fe000 - 0xfe1fefff (0x1000) MX[B]
[8] -1 0 0xfe1ff800 - 0xfe1ff8ff (0x100) MX[B]
[9] -1 0 0xfe1ffc00 - 0xfe1ffcff (0x100) MX[B]
[10] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[11] -1 0 0x80000000 - 0x8001ffff (0x20000) MX[B](B)
[12] -1 0 0xf3f80000 - 0xf3ffffff (0x80000) MX[B](B)
[13] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
[14] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000ec00 - 0x0000ec3f (0x40) IX[B]
[18] -1 0 0x0000ec40 - 0x0000ec4f (0x10) IX[B]
[19] -1 0 0x0000ec58 - 0x0000ec5f (0x8) IX[B]
[20] -1 0 0x0000ec60 - 0x0000ec7f (0x20) IX[B]
[21] -1 0 0x0000ec80 - 0x0000ec9f (0x20) IX[B]
[22] -1 0 0x0000eca0 - 0x0000ecbf (0x20) IX[B]
[23] -1 0 0x0000ecc0 - 0x0000ecdf (0x20) IX[B]
[24] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B]
[25] -1 0 0x0000dcf0 - 0x0000dcff (0x10) IX[B]
[26] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.0.1
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "nv"
(II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o
(II) Module nv: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.1
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) v4l driver for Video4Linux
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2, Vanta,
RIVA TNT2 Ultra, RIVA TNT2 Model 64, Aladdin TNT2, GeForce 256,
GeForce DDR, Quadro, GeForce2 MX/MX 400, GeForce2 MX 100/200,
GeForce2 Go, Quadro2 MXR/EX/Go, GeForce2 Integrated GPU,
GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra, Quadro2 Pro,
GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, GeForce4 440 Go 64M,
GeForce4 410 Go 16M, Quadro4 500 GoGL, Quadro4 550 XGL, Quadro4 NVS,
GeForce4 MX 440 with AGP8X, GeForce4 MX 440SE with AGP8X,
GeForce4 MX 420 with AGP8X, GeForce4 448 Go, GeForce4 488 Go,
Quadro4 580 XGL, Quadro4 280 NVS, Quadro4 380 XGL,
GeForce4 MX Integrated GPU, GeForce3, GeForce3 Ti 200,
GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400,
0x0252, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, 0x0300, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000, 0x0311, 0x0312,
0x0316, 0x0317, 0x0318, 0x0319, 0x031A, 0x031B, 0x031C, 0x031D,
0x031E, 0x031F, 0x0321, 0x0322, 0x0323, 0x0326, 0x032A, 0x032B,
0x032E
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset GeForce4 MX 420 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfe1c0000 - 0xfe1dffff (0x20000) MX[B]
[6] -1 0 0xfe1fd000 - 0xfe1fdfff (0x1000) MX[B]
[7] -1 0 0xfe1fe000 - 0xfe1fefff (0x1000) MX[B]
[8] -1 0 0xfe1ff800 - 0xfe1ff8ff (0x100) MX[B]
[9] -1 0 0xfe1ffc00 - 0xfe1ffcff (0x100) MX[B]
[10] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[11] -1 0 0x80000000 - 0x8001ffff (0x20000) MX[B](B)
[12] -1 0 0xf3f80000 - 0xf3ffffff (0x80000) MX[B](B)
[13] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
[14] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000ec00 - 0x0000ec3f (0x40) IX[B]
[18] -1 0 0x0000ec40 - 0x0000ec4f (0x10) IX[B]
[19] -1 0 0x0000ec58 - 0x0000ec5f (0x8) IX[B]
[20] -1 0 0x0000ec60 - 0x0000ec7f (0x20) IX[B]
[21] -1 0 0x0000ec80 - 0x0000ec9f (0x20) IX[B]
[22] -1 0 0x0000eca0 - 0x0000ecbf (0x20) IX[B]
[23] -1 0 0x0000ecc0 - 0x0000ecdf (0x20) IX[B]
[24] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B]
[25] -1 0 0x0000dcf0 - 0x0000dcff (0x10) IX[B]
[26] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfe1c0000 - 0xfe1dffff (0x20000) MX[B]
[6] -1 0 0xfe1fd000 - 0xfe1fdfff (0x1000) MX[B]
[7] -1 0 0xfe1fe000 - 0xfe1fefff (0x1000) MX[B]
[8] -1 0 0xfe1ff800 - 0xfe1ff8ff (0x100) MX[B]
[9] -1 0 0xfe1ffc00 - 0xfe1ffcff (0x100) MX[B]
[10] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[11] -1 0 0x80000000 - 0x8001ffff (0x20000) MX[B](B)
[12] -1 0 0xf3f80000 - 0xf3ffffff (0x80000) MX[B](B)
[13] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
[14] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x0000ec00 - 0x0000ec3f (0x40) IX[B]
[21] -1 0 0x0000ec40 - 0x0000ec4f (0x10) IX[B]
[22] -1 0 0x0000ec58 - 0x0000ec5f (0x8) IX[B]
[23] -1 0 0x0000ec60 - 0x0000ec7f (0x20) IX[B]
[24] -1 0 0x0000ec80 - 0x0000ec9f (0x20) IX[B]
[25] -1 0 0x0000eca0 - 0x0000ecbf (0x20) IX[B]
[26] -1 0 0x0000ecc0 - 0x0000ecdf (0x20) IX[B]
[27] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B]
[28] -1 0 0x0000dcf0 - 0x0000dcff (0x10) IX[B]
[29] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[30] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[31] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) NV(0): Initializing int10
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Chipset: "GeForce4 MX 420"
(**) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(==) NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0xF4000000
(--) NV(0): MMIO registers at 0xFC000000
(II) NV(0): Detected CRTC controller 0 being used
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.6
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0): DDC Monitor info: 0x837dee0
(II) NV(0): Manufacturer: DEL Model: 7006 Serial#: 0
(II) NV(0): Year: 2002 Week: 51
(II) NV(0): EDID Version: 1.3
(II) NV(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) NV(0): Sync: Separate
(II) NV(0): Max H-Image Size [cm]: horiz.: 30 vert.: 23
(II) NV(0): Gamma: 2.20
(II) NV(0): DPMS capabilities: Off; RGB/Color Display
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.623 redY: 0.335 greenX: 0.293 greenY: 0.599
(II) NV(0): blueX: 0.144 blueY: 0.113 whiteX: 0.310 whiteY: 0.330
(II) NV(0): Supported VESA Video Modes:
(II) NV(0): 720x400@70Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@75Hz
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 65.0 MHz Image Size: 304 x 228 mm
(II) NV(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) NV(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
(II) NV(0): Serial No: 4R8692CMN1YL
(II) NV(0): Monitor name: Dell E151FPp
(II) NV(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 61 kHz, PixClock max 80 MHz
(II) NV(0): end of DDC Monitor info

MisterGoof · 08-17-2004, 04:05 PM

and path 2 is

and ideas wold be greatfuly recieved

MG

Quote:

(--) NV(0): VideoRAM: 65536 kBytes
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): monitor1: Using hsync range of 30.00-61.00 kHz
(II) NV(0): monitor1: Using vrefresh range of 56.00-76.00 Hz
(II) NV(0): Clock range: 12.00 to 350.00 MHz
(II) NV(0): Not using mode "1024x480" (vrefresh out of range)
(II) NV(0): Not using mode "768x576" (vrefresh out of range)
(II) NV(0): Not using mode "768x576" (vrefresh out of range)
(II) NV(0): Not using default mode "640x350" (vrefresh out of range)
(II) NV(0): Not using default mode "320x175" (vrefresh out of range)
(II) NV(0): Not using default mode "640x400" (vrefresh out of range)
(II) NV(0): Not using default mode "320x200" (vrefresh out of range)
(II) NV(0): Not using default mode "720x400" (vrefresh out of range)
(II) NV(0): Not using default mode "360x200" (vrefresh out of range)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "320x240" (vrefresh out of range)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "400x300" (vrefresh out of range)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "512x384" (hsync out of range)
(II) NV(0): Not using default mode "1152x864" (width too large for virtual size)
(II) NV(0): Not using default mode "576x432" (hsync out of range)
(II) NV(0): Not using default mode "1280x960" (width too large for virtual size)
(II) NV(0): Not using default mode "1280x960" (width too large for virtual size)
(II) NV(0): Not using default mode "640x480" (hsync out of range)
(II) NV(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) NV(0): Not using default mode "640x512" (hsync out of range)
(II) NV(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) NV(0): Not using default mode "640x512" (hsync out of range)
(II) NV(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) NV(0): Not using default mode "640x512" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) NV(0): Not using default mode "896x672" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) NV(0): Not using default mode "896x672" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) NV(0): Not using default mode "928x696" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) NV(0): Not using default mode "928x696" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "1152x768" (width too large for virtual size)
(II) NV(0): Not using default mode "576x384" (vrefresh out of range)
(II) NV(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) NV(0): Not using default mode "700x525" (hsync out of range)
(II) NV(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) NV(0): Not using default mode "700x525" (hsync out of range)
(II) NV(0): Not using default mode "1600x1024" (width too large for virtual size)
(II) NV(0): Not using default mode "800x512" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(**) NV(0): Virtual size is 1024x768 (pitch 1024)
(**) NV(0): *Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) NV(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) NV(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) NV(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) NV(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) NV(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) NV(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) NV(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) NV(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) NV(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) NV(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) NV(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) NV(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) NV(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) NV(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) NV(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) NV(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) NV(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) NV(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) NV(0): *Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "640x480" 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync
(**) NV(0): *Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(II) NV(0): Modeline "512x384" 39.40 512 520 568 656 384 384 386 400 doublescan +hsync +vsync
(**) NV(0): *Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) NV(0): Modeline "512x384" 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync
(**) NV(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync
(**) NV(0): *Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) NV(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync
(**) NV(0): *Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) NV(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync
(**) NV(0): *Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) NV(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync
(**) NV(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) NV(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync
(**) NV(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) NV(0): Modeline "400x300" 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync
(**) NV(0): *Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "320x240" 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync
(**) NV(0): *Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) NV(0): Modeline "320x240" 15.75 320 332 352 416 240 244 245 260 doublescan -hsync -vsync
(**) NV(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) NV(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246 262 doublescan -hsync -vsync
(--) NV(0): Display dimensions: (300, 230) mm
(--) NV(0): DPI set to (86, 84)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xf3f80000 - 0xf3ffffff (0x80000) MX[B]
[1] 0 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B]
[2] 0 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B]
[3] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[4] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xfe1c0000 - 0xfe1dffff (0x20000) MX[B]
[9] -1 0 0xfe1fd000 - 0xfe1fdfff (0x1000) MX[B]
[10] -1 0 0xfe1fe000 - 0xfe1fefff (0x1000) MX[B]
[11] -1 0 0xfe1ff800 - 0xfe1ff8ff (0x100) MX[B]
[12] -1 0 0xfe1ffc00 - 0xfe1ffcff (0x100) MX[B]
[13] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[14] -1 0 0x80000000 - 0x8001ffff (0x20000) MX[B](B)
[15] -1 0 0xf3f80000 - 0xf3ffffff (0x80000) MX[B](B)
[16] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
[17] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[18] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[19] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[20] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[22] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[23] -1 0 0x0000ec00 - 0x0000ec3f (0x40) IX[B]
[24] -1 0 0x0000ec40 - 0x0000ec4f (0x10) IX[B]
[25] -1 0 0x0000ec58 - 0x0000ec5f (0x8) IX[B]
[26] -1 0 0x0000ec60 - 0x0000ec7f (0x20) IX[B]
[27] -1 0 0x0000ec80 - 0x0000ec9f (0x20) IX[B]
[28] -1 0 0x0000eca0 - 0x0000ecbf (0x20) IX[B]
[29] -1 0 0x0000ecc0 - 0x0000ecdf (0x20) IX[B]
[30] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B]
[31] -1 0 0x0000dcf0 - 0x0000dcff (0x10) IX[B]
[32] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[33] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[34] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) NV(0): Write-combining range (0xf4000000,0x4000000)
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(**) Option "dpms"
(**) NV(0): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Keyboard "Keyboard1" handled by legacy driver
(**) Option "Protocol" "ExplorerPS/2"
(**) Mouse1: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "6 7"
(**) Mouse1: ZAxisMapping: buttons 6 and 7
(**) Mouse1: Buttons: 7
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
SetClientVersion: 0 7

pingu · 08-18-2004, 03:28 AM

Hmm...
I can't find something really wrong here. But you should edit /etc/X11/XF86config-4, all those "not using default mode ..." means there are videomodes defined that can't be used. (This will not give the errors you have, only means it takes time to start X. Fix that when computer is working.)

But your problem is somewhere else.
Trembling in darkness:
*) check diskspace with 'df' , if any partition is full (especially / and /home) that could be it
*) check filesystem: Now I don't know what partitions you have, check if you don't know with
# fdisk -l (shows you all partitions)
# df (shows mounted partitions)
(In the following I assume you have /dev/hda2 and /dev/hda5 for your Mandrake.)
su to root
#su
<enter password at prompt>
#init 1
# mount / -o remount,ro
#e2fsck /dev/hda2
#e2fsck /dev/hda5

All I can think of right now, return with results, I'll try to think in the meantime.
Oh yes, to get an output to a file, use >
# fdisk -l > /mypartitions.txt
will write a file /mypartitions.txt