Kopete and MSN Messenger problems
Hey Guys I have been trying to figure out for the last couple of days why I can't log onto MSN Messenger using Kopete and I have been unsuccessful. I have tried calling MSN Tech Support and they offer no tech support unless you are a paying member and since I have a free web based account, they basically told me to go take a hike. They suggested their website for support and I tried that and have hit a dead end wall there as well.
I know my username and password are all correct, as I can log onto the email account. Does anyone offer any advice or possible solutions/fixes to this problem or is it impossible? d-1 |
This is a known issue. You'll need the latest fix from the Kopete SVN repository. Then you'll need to recompile Kopete.
The fix will be in the KDE 3.4.1 release, which is supposedly a few weeks from now (mid-June 2005). For more information, see the May 20th Announcement on the Kopete home page: http://kopete.kde.org/index.php |
I appreciate the reply smithtodd, but I went to that site and it seems the fix is for a different version of KDE. I am running KDE 3.2.3. I tried uninstalling kopete and reinstalling with a urpmi kope command and that did not work either. I still do not know what the SVN repository means and how do I recompile Kopete?
Thanks.. d-1 Quote:
|
My understanding of the issue is that a change to MSN's servers caused the Kopete error. Therefore, all versions of Kopete, regardless of your KDE version, are going to have the problem. Of course, KDE 3.4.1 will supposedly incorporate the fix for you. So, from what I understand, you either need to get the fix and recompile Kopete yourself, or wait for KDE 3.4.1 to be released, and then upgrade your system to that level of KDE.
SVN is short for Subversion, which is the self-described "compelling replacement for CVS". Both are version control systems, wherein code is managed during development projects. I cannot tell you how to patch and recompile Kopete, since I have never done that myself. I am going to wait for KDE 3.4.1 to be released. Have you thought of running Gaim in the meantime? It supports MSN as well: http://gaim.sourceforge.net/ I wish I could be more helpful to you at this time. |
Go back to the same link provided by smithtodda. Today, they posted a source code fix for KDE 3.2. Be sure to uninstall your existing version of Kopete, compile the source code from the Kopete link for KDE 3.2. Install it and you'll be good to go. Post back if you need help compiling source code.
Good Luck. |
mkojack,
I uninstalled kopete and reinstalled the following version. I do not know how recompile, but when I downloaded and extracted it and ran the ./configure command I got the following message below. I never ran the make command. What should I do next? [root@localhost kopete-0.9.2]# ./configure checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking for -p flag to install... yes checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for kde-config... /usr/bin/kde-config checking where to install... /usr (as returned by kde-config) checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking dependency style of gcc... gcc3 checking how to run the C preprocessor... gcc -E checking for g++... no checking for c++... no checking for gpp... no checking for aCC... no checking for CC... no checking for cxx... no checking for cc++... no checking for cl... no checking for FCC... no checking for KCC... no checking for RCC... no checking for xlC_r... no checking for xlC... no checking whether we are using the GNU C++ compiler... no checking whether g++ accepts -g... no checking dependency style of g++... none checking whether g++ supports -Wmissing-format-attribute... no checking whether gcc supports -Wmissing-format-attribute... yes checking whether g++ supports -Wundef... no checking whether g++ supports -Wno-long-long... no checking whether g++ supports -Wnon-virtual-dtor... no checking how to run the C++ preprocessor... /lib/cpp configure: error: C++ preprocessor "/lib/cpp" fails sanity check See `config.log' for more details. [root@localhost kopete-0.9.2]# d-1 Quote:
|
Well--
Unfortunately, I'm not a Mandrake/Mandriva person. It appears you do not have all the development libraries downloaded and installed. They are all rpm's. I can't help you with what is required in Mandrake or how the pkgs are named.
At minimum, to install a 'C compiler' and 'make' you will need: * glibc-devel * gcc * make However, you many need to add additional pkgs. I did a complete install of all pkgs in Fedora and Suse--so my system was ready to go to compile source. I wish I could be more helpful. I'm sure a Mandrake person or moderator will help you soon. Just sit tight and someone will read the posts and help you better than I. When in doubt, reddazz is a really helpful resource person. |
Re: Well--
Thanks will wait it out....
d-1 Quote:
|
You dont have g++ installed( the gnu c++ compiler). If you have setup your urpmi sources,do
Code:
urpmi gcc-c++ You can also install it from the CDs(If you have them) Make sure you have other important packages like ´make´ before trying again. |
Thanks abattor, I tried urpmi gcc-cc++ and I got the following;
[root@localhost stan]# urpmi gcc-c++ To satisfy dependencies, the following 5 packages are going to be installed (77 MB): gcc-3.4.1-4mdk.i586 gcc-c++-3.4.1-4mdk.i586 gcc-cpp-3.4.1-4mdk.i586 libstdc++6-3.4.1-4mdk.i586 libstdc++6-devel-3.4.1-4mdk.i586 Is this OK? (Y/n) y ftp://fr2.rpmfind.net/linux/Mandrake...-4mdk.i586.rpm ftp://fr2.rpmfind.net/linux/Mandrake...-4mdk.i586.rpm ...retrieving failed: curl: (9) Couldn't cd to 10.1 ftp://fr2.rpmfind.net/linux/Mandrake...-4mdk.i586.rpm ...retrieving failed: curl: (9) Couldn't cd to 10.1 ftp://fr2.rpmfind.net/linux/Mandrake...-4mdk.i586.rpm ...retrieving failed: curl: (9) Couldn't cd to 10.1 ftp://fr2.rpmfind.net/linux/Mandrake...-4mdk.i586.rpm ...retrieving failed: curl: (9) Couldn't cd to 10.1 ...retrieving failed: curl: (9) Couldn't cd to 10.1 ...retrieving failed: curl failed: exited with 9 or signal 0 Installation failed, some files are missing: ftp://fr2.rpmfind.net/linux/Mandrake...-4mdk.i586.rpm ftp://fr2.rpmfind.net/linux/Mandrake...-4mdk.i586.rpm ftp://fr2.rpmfind.net/linux/Mandrake...-4mdk.i586.rpm ftp://fr2.rpmfind.net/linux/Mandrake...-4mdk.i586.rpm ftp://fr2.rpmfind.net/linux/Mandrake...-4mdk.i586.rpm You may want to update your urpmi database d-1 Quote:
|
Have you set up your urpmi sources properly?
Your profile says you have 10.0, but i think your urpmi mirrors point to 10.1 packages. |
I thought I had 10.1 community:
[/QUOTE] Code:
[root@localhost stan]# cat /etc/mandrake-release [root@localhost stan]# urpmi.addmedia plf-free ftp://ftp.free.fr/pub/Distributions_...rake/free/10.2 with hdlist.cz medium "plf-free" already exists [root@localhost stan]# urpmi.addmedia plf-nonfree ftp://ftp.easynet.fr/plf/mandrake/non-free/10.2 with hdlist.cz medium "plf-nonfree" already exists [root@localhost stan]# urpmi.addmedia --update updates ftp://ftp.proxad.net/pub/Distributio.../main_updates/ with media_info/hdlist.cz medium "updates" already exists [root@localhost stan]# urpmi.addmedia main ftp://ftp.proxad.net/pub/Distributio...586/media/main with media_info/hdlist.cz medium "main" already exists [root@localhost stan]# urpmi.addmedia contrib ftp://ftp.proxad.net/pub/Distributio.../media/contrib with media_info/hdlist.cz medium "contrib" already exists [root@localhost stan]# urpmi.addmedia jpackage ftp://ftp.proxad.net/pub/Distributio...media/jpackage with media_info/hdlist.cz medium "jpackage" already exists [root@localhost stan]# urpmi.addmedia plf-free ftp://ftp.free.fr/pub/Distributions_...rake/free/10.2 with hdlist.cz added medium plf-free examining synthesis file [/var/lib/urpmi/synthesis.hdlist.jpackage.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Open Office 2.0.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.contrib.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.updates.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.plf-nonfree.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.main.cz] computing md5sum of existing source hdlist (or synthesis) retrieving source hdlist (or synthesis) of "plf-free"... ftp://ftp.free.fr/pub/Distributions_...10.2/hdlist.cz found probed hdlist (or synthesis) as hdlist.cz ...retrieving done examining hdlist file [/var/cache/urpmi/partial/hdlist.plf-free.cz] writing list file for medium "plf-free" examining pubkey file of "plf-free"... performing second pass to compute dependencies examining hdlist file [/var/lib/urpmi/hdlist.jpackage.cz] built hdlist synthesis file for medium "jpackage" examining hdlist file [/var/lib/urpmi/hdlist.Open Office 2.0.cz] built hdlist synthesis file for medium "Open Office 2.0" examining hdlist file [/var/lib/urpmi/hdlist.contrib.cz] built hdlist synthesis file for medium "contrib" examining hdlist file [/var/lib/urpmi/hdlist.updates.cz] built hdlist synthesis file for medium "updates" examining hdlist file [/var/lib/urpmi/hdlist.plf-nonfree.cz] built hdlist synthesis file for medium "plf-nonfree" examining hdlist file [/var/lib/urpmi/hdlist.main.cz] built hdlist synthesis file for medium "main" examining hdlist file [/var/lib/urpmi/hdlist.plf-free.cz] built hdlist synthesis file for medium "plf-free" found 24 headers in cache removing 0 obsolete headers in cache write config file [/etc/urpmi/urpmi.cfg] [root@localhost stan]# urpmi.addmedia plf-nonfree ftp://ftp.easynet.fr/plf/mandrake/non-free/10.2 with hdlist.cz medium "plf-nonfree" already exists [root@localhost stan]# urpmi.addmedia --update updates ftp://ftp.proxad.net/pub/Distributio.../main_updates/ with media_info/hdlist.cz medium "updates" already exists [root@localhost stan]# urpmi.addmedia main ftp://ftp.proxad.net/pub/Distributio...586/media/main with media_info/hdlist.cz medium "main" already exists [root@localhost stan]# urpmi.addmedia contrib ftp://ftp.proxad.net/pub/Distributio.../media/contrib with media_info/hdlist.cz medium "contrib" already exists [root@localhost stan]# urpmi.addmedia jpackage ftp://ftp.proxad.net/pub/Distributio...media/jpackage with media_info/hdlist.cz medium "jpackage" already exists [root@localhost stan]# cat /etc/mandrake-release Mandrakelinux release 10.1 (Community) for i586 [root@localhost stan]# [QUOTE]Originally posted by abattoir Have you set up your urpmi sources properly? Your profile says you have 10.0, but i think your urpmi mirrors point to 10.1 packages. |
You must do
urpmi.removemedi plf-free, main etc. before doing urpmi.addmedia. |
abattoir, I tried to remove media using the Mandrake control center earlier, perhaps this did not work. I ran your command below "urpmi.removemedi plf-free" and I get this:
[root@localhost stan]# urpmi.removemedi plf-free bash: urpmi.removemedi: command not found [root@localhost stan]# I can't remember the exact command to remove media..... d-1 Quote:
|
Thanks, everyone, for the answers. I've been having the same issue on my system (Suse/KDE 3.3) and have just kind of ignored it the past few days. What a pain!
|
All times are GMT -5. The time now is 01:49 PM. |