INSTALLATION Problem
I have tried to install both, Gentoo, and Mandriva. Whenever I boot from the CD it loads some sort of "Caldera OS" command line with an A: prompt and some commands like /mlx.
Please help me install Mandriva! I am installing Mandriva 10.1 i586, x86_64 Specs: Pentium 4 2.8ghz 1024mb ram |
How did you burn the cd? Check http://www.linuxiso.org/viewdoc.php/howtoburn.html to see if you did it correctly.
|
how
I burned it using Nero Express. I tried using the conventional dialog which i think may work since it doesen't say UDF/ISO Bridge its just ISO
|
Does the cd work on a different pc? What speed did you burn at? I always find that 4x is the right maximum speed (regardless of the writer speed) and stops me making shiny coasters.
Also, did you compare the md5sums? http://www.linuxiso.org/viewdoc.php/verifyiso.html - that would indicate if your download was ok or not. |
Aha
I burned it with Roxio this time and it has worked. I believe Nero's image burning process is flawed.
|
Re: Aha
Quote:
|
Did you do this
Nero How to Burn a CD using Nero Version 6 (Ultra) --- Step 1 Launch Nero. --- Step 2 Select "Copy and Backup" icon near top right of dialog box. --- Step 3 Choose "Burn Image to Disc" --- Step 4 Choose "Image Files (x.nrg;x.iso;x.cue)" from the "Files of type:" drop-down list. --- Step 5 Navigate to the .iso file. Dbl-click on it or select it and choose "Open" button. --- Step 6 Choose the "Write Speed" and "Number of copies" values on the Image Recording dialog box. Click Next. --- Step 7 If you don't have a CD in the drive, Nero will ask you for one. Otherwise, Nero begins the burn process. --- Step 8 Unless there was a problem, you're done. Nero has a couple of more screens. Version 5.5 or earlier --- Step 1 Insert a blank CD into the CD writer --- Step 2 Launch Nero. --- Step 3 In the File menu, select "Burn CD image". --- Step 4 Choose as file type: all files (.), since Nero expects files with the NRG suffix. --- Step 5 Select the ISO image file --- Step 6 You will see a dialog box asking if you want to supply detailed image parameters. (for later versions, these are the default values) Enter the following parameters: * Type of image: Data Mode 1 * Block size: 2048 bytes per sector * File precursor and image trailer: 0 length * No scrambled and no Swapped. --- Step 7 Click on "burn". If the program complains that there are errors in the image file, click on the button "Ignore" and launch the burning. |
actually yes, i did all that exactly as you said. it still didn't work.
|
All times are GMT -5. The time now is 12:24 AM. |