LinuxQuestions.org
Share your knowledge at the LQ Wiki.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Mandriva
User Name
Password
Mandriva This Forum is for the discussion of Mandriva (Mandrake) Linux.

Notices


Reply
  Search this Thread
Old 09-20-2010, 08:50 AM   #1
ranvir03
LQ Newbie
 
Registered: Sep 2010
Posts: 19

Rep: Reputation: 0
Unhappy how to connect to ZTE AC2746 to rhel5(x86_64)


hi!! this is ranvir...
i'm using rhel5(x86_64) and i want to connect it to ZTE AC2746 but a operating system not detect it as a data card
here is my karnel message & other configration....
please help....

[root@localhost ~]# sudo tail /var/log/messages
Sep 18 06:45:25 localhost kernel: Type: CD-ROM ANSI SCSI revision: 02
Sep 18 06:45:26 localhost kernel: sr0: scsi-1 drive
Sep 18 06:45:26 localhost kernel: sr 6:0:0:0: Attached scsi generic sg1 type 5
Sep 18 06:45:26 localhost kernel: Vendor: ZTE Model: USB Storage FFF1 Rev: 2.31
Sep 18 06:45:26 localhost kernel: Type: Direct-Access ANSI SCSI revision: 02
Sep 18 06:45:26 localhost kernel: sd 6:0:0:1: Attached scsi removable disk sdc
Sep 18 06:45:26 localhost kernel: sd 6:0:0:1: Attached scsi generic sg2 type 0
Sep 18 06:45:26 localhost ztemtvcdromd: receive a SIGUSR1
Sep 18 06:45:26 localhost ztemtvcdromd: open /dev/sgZTEMT CD-ROM Success
Sep 18 06:45:27 localhost hald: mounted /dev/scd0 on behalf of uid 0
[root@localhost ~]# lsusb
Bus 004 Device 001: ID 0000:0000
Bus 004 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
Bus 001 Device 001: ID 0000:0000
Bus 005 Device 004: ID 19d2:fff5 ONDA Communication S.p.A.
Bus 005 Device 001: ID 0000:0000
Bus 006 Device 003: ID 15d9:0a33 Trust International B.V. Optical Mouse
Bus 006 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 002 Device 003: ID 04f2:b016 Chicony Electronics Co., Ltd VGA 30fps UVC Webcam
Bus 007 Device 001: ID 0000:0000
[root@localhost ~]# cat /etc/usb_modeswitch.conf
# /etc/usb_modeswitch.conf
#
# Configuration for usb_modeswitch, a mode switching tool for controlling
# flip flop (multiple device) USB gear
#
# Triggers the switching of several known UMTS modems from storage device mode
# ("ZeroCD" under MS Windows) to modem (serial) device mode
#
# Detailed instructions and a friendly forum on the homepage:
# http://www.draisberghof.de/usb_modeswitch


# What it all means:
#
# * DefaultVendor
# * DefaultProduct
#
# This is the ID the USB device shows after having been plugged in.
# The tool looks for this; if not found -> no action.
#
# * TargetVendor
# * TargetProduct (both optional)
#
# This is the ID the USB device after successful mode switching.
# The tool looks for this; if found -> no action.
#
# * MessageEndpoint
#
# A kind of address inside the interface to which the "message"
# (the sequence that does the actual switching) is directed
#
# * MessageContent
#
# A hex string containing the "message" sequence; it will be
# sent as a USB bulk transfer
#
# * ResponseEndpoint
# * NeedResponse (Default: no)
#
# Some devices need to receive the response of the bulk
# transfer to do the switching properly
#
# * DetachStorageOnly (Default: no)
#
# Some devices just need to be detached from the usb-storage
# driver to initiate the mode switching
#
# All other entries are just ignored ...
#
#
# For filling in all this information for an unknown device,
# note its Vendor and Product ID after plugging in (usb-storage)
# from /proc/bus/usb/devices (or from the output of "lsusb"), then
# try spying on the USB communication to this device inside a
# Micro$oft OS. Recommended tool: "SniffUSB"
#
# If you find working codes and configurations, please contribute
# them!



#######################################################
# Option GlobeSurfer Icon (aka "Vodafone EasyBox")

DefaultVendor= 0x05c6
DefaultProduct= 0x1000

TargetVendor= 0x0af0
TargetProduct= 0x6600

MessageEndpoint=0x05
MessageContent="55534243706ede860000000000000601000000000000000000000000000000"


#######################################################
# Option GlobeSurfer Icon 7.2
#
# Contributor: The Pharscape Forum

;DefaultVendor= 0x05c6
;DefaultProduct= 0x1000

;TargetVendor= 0x0af0
;TargetProduct= 0x6901

;MessageEndpoint=0x05
;MessageContent="55534243706ede860000000000000601000000000000000000000000000000"


########################################################
# Option GlobeTrotter GT MAX 3.6 (aka "T-Mobile Web'n'walk Card Compact II")
#
# Contributor: Bernd Holzm

;DefaultVendor= 0x05c6
;DefaultProduct= 0x1000

;TargetVendor= 0x0af0
;TargetProduct= 0x6600

;MessageEndpoint=0x05
;MessageContent="55534243d0d78d850000000000000601000000000000000000000000000000"

;ResponseEndpoint=0x84
;NeedResponse=1


########################################################
# Option GlobeTrotter GT MAX "7.2 Ready"
#
# Timing is an issue here when automated with udev. See homepage!
#
# Contributor: Lucas Benedicic

;DefaultVendor= 0x05c6
;DefaultProduct= 0x1000

;TargetVendor= 0x0af0
;TargetProduct= 0x6701

;MessageEndpoint=0x05
;MessageContent="5553424308e0f8840800000080000a4a010000000000000800000000000000"



########################################################
# Option GlobeTrotter EXPRESS 7.2 (aka "T-Mobile wnw Express II")
#
# Working reliably. NeedResponse now confirmed
#
# Contributor: Fridtjof Busse

;DefaultVendor= 0x05c6
;DefaultProduct= 0x1000

;TargetVendor= 0x0af0
;TargetProduct= 0x6701

;MessageEndpoint=0x05
;MessageContent="55534243d0d78d850000000000000601000000000000000000000000000000"

;ResponseEndpoint=0x84
;NeedResponse=1


########################################################
# Huawei E220 (aka "Vodafone EasyBox II", aka "T-Mobile wnw Box Micro")
#
# Two options now: 1. removal of "usb-storage" 2. the special control
# message found by Miroslav Bobovsky
#
# Contributor: Hans Kurent, Denis Sutter

;DefaultVendor= 0x12d1;
;DefaultProduct= 0x1003

# choose one of these:
;DetachStorageOnly=1
;HuaweiMode=1


########################################################
# Huawei E630 (Experimental)
#
# Beware: there are modem-only variants around - no storage,
# no switching necessary!
#
# Caveat: this is untested and may present problems. You might
# try to use the new Huawei sequence with it
#
# Contributor: Joakim Wenrgren

;DefaultVendor= 0x1033
;DefaultProduct= 0x0035

;TargetVendor= 0x12d1
;TargetProduct= 0x1003

;DetachStorageOnly=1


########################################################
# ZTE MF620 (Experimental)
#
# Message string taken from a sniffer log. Untested!
#
# Contributor: Fl�vio Moringa

;DefaultVendor= 0x19d2
;DefaultProduct= 0x2000

;TargetVendor= 0x19d2
;TargetProduct= 0x0001

;MessageEndpoint=0x04
;MessageContent="5553424308a0b7870000000000000600000000000000000000000000000000"

########################################################
# ZTE AC2746 (Experimental)
#
# Message string taken from a sniffer log. Untested!
#
# Contributor: Fl�vio Moringa

DefaultVendor= 0x19d2
DefaultProduct= 0xfff5

TargetVendor= 0x19d2
TargetProduct= 0xfff1
MessageEndpoint=0x0a

MessageContent="5553424312345678c00000008000069f010000000000000000000000000000"


[root@localhost ~]#
 
Old 09-20-2010, 11:50 AM   #2
jkerr82508
Member
 
Registered: Dec 2006
Location: Fife, Scotland
Posts: 268

Rep: Reputation: 69
I have a ZTE device (different model). "Ejecting" the "storage device" (I use dolphin in Mandriva) results in the device being properly recognised. I read somewhere the series of commands that you can send to a ZTE device to cause it to be properly recognized. I forget where. Perhaps on an Ubuntu forum.

Jim

Last edited by jkerr82508; 09-20-2010 at 11:59 AM.
 
Old 09-20-2010, 02:13 PM   #3
ranvir03
LQ Newbie
 
Registered: Sep 2010
Posts: 19

Original Poster
Rep: Reputation: 0
A lot of thanx to you..!!
hay i'm just ejecting it & now run this command
#wvdialconf /etc/wvdial.conf
now its work sucessfully...
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Help to connect Reliance Netconnect ZTE AC 8710 in Ubuntu 8.04 rspatani Linux - Newbie 1 01-20-2010 11:06 PM
RHEL5(x86_64) running on vmware esx hangs ursusca Linux - Virtualization and Cloud 4 10-23-2009 03:00 AM
How to connect Reliance ZTE CDMA modem in ubuntu bskumar7080 Linux - Newbie 5 09-21-2009 01:01 PM
RHEL5 server fails to install x86_64 but 32bit okay? spaceace13666 Red Hat 10 09-18-2008 07:12 AM
Setting 32bit Firefox to default on RHEL5 x86_64 ? hollywoodb Red Hat 3 04-30-2007 05:11 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Mandriva

All times are GMT -5. The time now is 08:50 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration