LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Mandriva (https://www.linuxquestions.org/questions/mandriva-30/)
-   -   has anyone else had this problem (https://www.linuxquestions.org/questions/mandriva-30/has-anyone-else-had-this-problem-343629/)

superdoyle 07-15-2005 10:21 PM

has anyone else had this problem
 
hi. i'm new here but not to the linux world. i am running mdk 10.1 official. i was wondering if anyone else had a problem getting phpsysinfo to show temp voltage and fan speed. i installed the lm_sensors and ran sensors-detect. when i type sensors as root i get:

[root@localhost superdoyle]# sensors
eeprom-i2c-0-51
Adapter: SMBus I801 adapter at efa0
Memory type: SDR SDRAM DIMM
Memory size (MB): 64

eeprom-i2c-0-50
Adapter: SMBus I801 adapter at efa0
Memory type: SDR SDRAM DIMM
Memory size (MB): 64

if somone has gotten the sensors to work can they give me a run down how they did it

linux-rulz 07-16-2005 01:19 PM

Run sensors-detect so that you have the proper things added to ur modules file to load at bootup. Then, run xsensors, works a lot better. Awful UI but good program. If only the sensors on my own computer were properly supported! :@

superdoyle 07-16-2005 10:14 PM

i've tried what you told me to do still i get,

[root@localhost phpsysinfo]# sensors
eeprom-i2c-0-51
Adapter: SMBus I801 adapter at efa0
Memory type: SDR SDRAM DIMM
Memory size (MB): 64

eeprom-i2c-0-50
Adapter: SMBus I801 adapter at efa0
Memory type: SDR SDRAM DIMM
Memory size (MB): 64

#heres somthing that comes out of sensors-detect but i have no idea what it means

Driver `smsc47m1' (should be inserted):
Detects correctly:
* ISA bus address 0x0800 (Busdriver `i2c-isa')
Chip `SMSC 47M10x/13x Super IO Fan Sensors' (confidence: 9)

linux-rulz 07-16-2005 10:47 PM

Yes, but what happened when you ran xsensors, not sensors, from the terminal inside gnome/kde?

superdoyle 07-17-2005 11:10 PM

i just got xsensors and its only showing SDRAM

linux-rulz 07-17-2005 11:47 PM

The the sensors on your hardware are probably not supported properly under Linux.

Is there any specific reason you need to have your temp, etc. shown?

superdoyle 07-18-2005 01:36 AM

no not really, i was just curious cause its a old machine...
but now i got a new problem that just started after reboot so i'm gonna go try and fix it.


All times are GMT -5. The time now is 09:24 AM.