LinuxQuestions.org
Welcome to the most active Linux Forum on the web.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Mandriva
User Name
Password
Mandriva This Forum is for the discussion of Mandriva (Mandrake) Linux.

Notices


Reply
  Search this Thread
Old 12-07-2010, 09:57 PM   #1
tzenrick
LQ Newbie
 
Registered: Dec 2010
Posts: 4

Rep: Reputation: 0
Audio Problem on Toughbook CF-19


Fresh install of 2010.1.

Intel HD Audio for STAC92xx

Internal Speaker = Not Working
External Audio = Works Fine

I suspect that it is a pin configuration problem.

Anyone have enough experience to tell me what I need to change, or should I just poke around at the config till it works?

(Probable) Useful Information
Code:
[root@localhost /]# uname -r
2.6.33.5-desktop-2mnb


[root@localhost /]# cat codec.0
Codec: SigmaTel STAC9200
Address: 0
Function Id: 0x1
Vendor Id: 0x83847690
Subsystem Id: 0x10f70000
Revision Id: 0x102201
No Modem Function Group found
Default PCM:
    rates [0x7e0]: 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
GPIO: io=4, o=0, i=0, unsolicited=1, wake=1
  IO[0]: enable=1, dir=1, wake=0, sticky=0, data=0, unsol=0
  IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[3]: enable=1, dir=1, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0xd0401: Stereo
  Device: name="STAC92xx Analog", type="Audio", device=0
  Converter: stream=0, channel=0
  Power: setting=D0, actual=D0
  Delay: 13 samples
Node 0x03 [Audio Input] wcaps 0x1d0541: Stereo
  Device: name="STAC92xx Analog", type="Audio", device=0
  Converter: stream=0, channel=0
  SDI-Select: 0
  Power: setting=D0, actual=D0
  Delay: 13 samples
  Connection: 1
     0x0a
  Processing caps: benign=0, ncoeff=0
Node 0x04 [Audio Input] wcaps 0x140311: Stereo Digital
  Device: name="STAC92xx Digital", type="SPDIF", device=1
  Converter: stream=0, channel=0
  SDI-Select: 0
  Digital:
  Digital category: 0x0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
  Delay: 4 samples
  Connection: 1
     0x08
Node 0x05 [Audio Output] wcaps 0x40211: Stereo Digital
  Control: name="IEC958 Playback Con Mask", index=0, device=0
  Control: name="IEC958 Playback Pro Mask", index=0, device=0
  Control: name="IEC958 Playback Default", index=0, device=0
  Control: name="IEC958 Playback Switch", index=0, device=0
  Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
  Device: name="STAC92xx Digital", type="SPDIF", device=1
  Converter: stream=0, channel=0
  Digital:
  Digital category: 0x0
  PCM:
    rates [0x1e0]: 44100 48000 88200 96000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
  Delay: 4 samples
Node 0x06 [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital
  Delay: 3 samples
Node 0x07 [Audio Selector] wcaps 0x300901: Stereo R/L
  Connection: 3
     0x02* 0x08 0x0a
Node 0x08 [Pin Complex] wcaps 0x430681: Stereo Digital
  Pincap 0x00010024: IN EAPD Detect
  EAPD 0x0:
  Pin Default 0x01c47010: [Jack] SPDIF In at Ext Rear
    Conn = RCA, Color = Yellow
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x20: IN
  Unsolicited: tag=00, enabled=0
  Power: setting=D0, actual=D0
  Delay: 3 samples
Node 0x09 [Pin Complex] wcaps 0x400301: Stereo Digital
  Pincap 0x00000010: OUT
  Pin Default 0x01447010: [Jack] SPDIF Out at Ext Rear
    Conn = RCA, Color = Yellow
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x40: OUT
  Connection: 2
     0x05* 0x0a
Node 0x0a [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L
  Control: name="Capture Volume", index=0, device=0
  Control: name="Capture Switch", index=0, device=0
  Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
  Amp-Out vals:  [0x0c 0x0c]
  Connection: 1
     0x0c
Node 0x0b [Audio Selector] wcaps 0x300105: Stereo Amp-Out
  Control: name="Master Playback Volume", index=0, device=0
  Control: name="Master Playback Switch", index=0, device=0
  Amp-Out caps: N/A
  Amp-Out vals:  [0x19 0x19]
  Connection: 1
     0x07
Node 0x0c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
  Control: name="Mux Capture Volume", index=0, device=0
  Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
  Amp-Out vals:  [0x03 0x03]
  Connection: 5
     0x10* 0x0f 0x0e 0x0d 0x12
Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
  Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
  Pin Default 0x0221401f: [Jack] HP Out at Ext Front
    Conn = 1/8, Color = Green
    DefAssociation = 0x1, Sequence = 0xf
  Pin-ctls: 0xc0: OUT HP
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x0b
Node 0x0e [Pin Complex] wcaps 0x400181: Stereo
  Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
  Pin Default 0x01114010: [Jack] Speaker at Ext Rear
    Conn = 1/8, Color = Green
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x0b
Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
  Pincap 0x00000037: IN OUT Detect Trigger ImpSense
  Pin Default 0x02a19020: [Jack] Mic at Ext Front
    Conn = 1/8, Color = Pink
    DefAssociation = 0x2, Sequence = 0x0
  Pin-ctls: 0x20: IN
  Unsolicited: tag=02, enabled=1
  Connection: 1
     0x0b
Node 0x10 [Pin Complex] wcaps 0x400181: Stereo
  Pincap 0x00001737: IN OUT Detect Trigger ImpSense
    Vref caps: HIZ 50 GRD 80
  Pin Default 0x01a19021: [Jack] Mic at Ext Rear
    Conn = 1/8, Color = Pink
    DefAssociation = 0x2, Sequence = 0x1
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=01, enabled=1
  Connection: 1
     0x0b
Node 0x11 [Pin Complex] wcaps 0x400104: Mono Amp-Out
  Amp-Out caps: N/A
  Amp-Out vals:  [0x00]
  Pincap 0x00000010: OUT
  Pin Default 0x90100140: [Fixed] Speaker at Int N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x4, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x00:
  Connection: 1
     0x13
Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
  Pincap 0x00000020: IN
  Pin Default 0x01813122: [Jack] Line In at Ext Rear
    Conn = 1/8, Color = Blue
    DefAssociation = 0x2, Sequence = 0x2
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
Node 0x13 [Audio Mixer] wcaps 0x200100: Mono
  Connection: 1
     0x07
Node 0x14 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
  Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1
  Amp-Out vals:  [0x00]


[root@localhost hwC0D0]# cat driver_pin_configs 
0x08 0x01c47010
0x09 0x01447010
0x0d 0x0221401f
0x0e 0x01114010
0x0f 0x02a19020
0x10 0x01a19021
0x11 0x90100140
0x12 0x01813122
Any suggestions?
 
Old 12-07-2010, 10:28 PM   #2
andrewthomas
Senior Member
 
Registered: May 2010
Location: Chicago Metro
Distribution: Arch, Gentoo, Slackware
Posts: 1,690

Rep: Reputation: 312Reputation: 312Reputation: 312Reputation: 312
This is a solution that worked on Ubuntu, but it probably will work for you.

https://bugs.launchpad.net/ubuntu/+s...06/comments/21
 
Old 12-08-2010, 11:22 AM   #3
tzenrick
LQ Newbie
 
Registered: Dec 2010
Posts: 4

Original Poster
Rep: Reputation: 0
I'm rebuilding my kernel. Taking out OSS and building ALSA into instead of a module.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Panasonic Toughbook CF-29 + Linux mogrady Linux - Hardware 8 12-29-2014 01:16 AM
Toughbook CF-29 won't get past splashscreens tenbbs Linux - Newbie 2 06-10-2010 12:23 AM
Panasonic Toughbook cf-25 help bob_hates_computers Linux - Hardware 4 06-10-2008 11:38 PM
Panasonic Toughbook CF-18 elect Linux - Laptop and Netbook 38 10-19-2007 12:58 AM
Touchscreen - Panasonic Toughbook CF-29 Azizcoos Linux - Hardware 14 04-26-2007 07:51 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Mandriva

All times are GMT -5. The time now is 01:43 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration