Hi I am new to linux and have just installed FEDORA but am having trouble getting my Zoomair wireless card to work. It seems to be almost there as the results of iwconfig eth0 shown below. I have tried to ping the gateway (10.0.0.2) but I don't get connectivity. I use 128 bit WEP on my wireless LAN and don't really want to remove it. Can anyone please help me?

iwconfig eth0

eth0 IEEE 802.11-DS ESSID:"RWLAN" Nickname:"dwork"
Mode:Managed Frequency:2.437GHz Access Point: 00:05:5D:F2:EA:2A
Bit Rate:2Mb/s Tx-Power=15 dBm Sensitivity:1/3
Retry min limit:8 RTS thrff Fragment thrff
Encryption key:E94C-5470-8148-39C2-E41A-8569-ED Security modepen
Power Managementff
Link Quality:29/92 Signal level:-73 dBm Noise level:-148 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

card is listed as Intersil PRISM2 11Mbs
driver is orinoco_cs

contents of /etc/sysconfig/network-scripts/ifcfg-eth0

DEVICE=eth0
BOOTPROTO=none
BROADCAST=10.0.0.255
IPADDR=10.0.0.133
NETMASK=255.255.255.0
NETWORK=10.0.0.0
ONBOOT=no
TYPE=Ethernet
USERCTL=no
PEERDNS=no
GATEWAY=10.0.0.2
MODE=Managed
ESSID=RWLAN
CHANNEL=6
KEY=e94c5470814839c2e41a8569ed