LinuxQuestions.org
Help answer threads with 0 replies.
Home Forums Tutorials Articles Register
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Networking > Linux - Wireless Networking
Reload this Page wireless problem using linux driver
User Name
Password
Linux - Wireless Networking This forum is for the discussion of wireless networking in Linux.

Notices


Reply
  Search this Thread
Old 12-27-2007, 04:02 AM   #1
fakie_flip
Senior Member
 
Registered: Feb 2005
Location: San Antonio, Texas
Distribution: Gentoo Hardened using OpenRC not Systemd
Posts: 1,495

Rep: Reputation: 85
wireless problem using linux driver

I tried using Vista x86 and x64 drivers with ndiswrapper. Neither
appeared to work.I thought I had to use ndiswrapper, but as I was
browsing around the web to find the windows driver, I found a linux
driver, so I began to follow the directions, but got stuck while
running a command didn't work. I have no experience with wireless in
Linux.

Code:
chris@ubuntu:~/Desktop/rtl8185_linux_26.1027.0823.2007$ ls
ifcfg-wlan0  release_note    wlan0dhcp  wpa_supplicant-0.4.9.tar.gz
makedrv      rtl8185.tar.gz  wlan0down
readme       stack.tar.gz    wlan0up
chris@ubuntu:~/Desktop/rtl8185_linux_26.1027.0823.2007$ cat readme
RTL8185 Linux Driver v1027.0823.2007 for linux kernel 2.6

  - Support Client mode for either infrastructure or adhoc mode
  - Support WEP and WPAPSK/WPA2PSK connection

===============================================================================================
< Component >
The driver is composed of several parts:
    (1)source code
        rtl8185.tar.gz
        stack.tar.gz

    (2)Script ot build the modules
        makedrv

    (3)Script to load/unload modules
        wlan0up
        wlan0down

    (4)Script and configuration for DHCP
        wlan0dhcp
        ifcfg-wlan0

    (5)Supplicant source code
        wpa_supplicant-0.4.9.tar.gz

    (6)Example of supplicant configuration file
        wpa1.conf




< Installation >
Running the scripts can finish all operations of building up modules
from source code and start the nic:

        (1)Build up the driver from the source code
                ./makedrv

        (2)Load the driver module to kernel and start up nic
                ./wlan0up
           (if "insmod: error inserting 'r8180.ko': -File exists." met,
                ./wlan0rmv
                ./wlan0down
                ./wlan0up
            should be OK.
           )
        (3)Refer to < Set wireless lan MIBs > to set Wireless LAN
specific parameters.





< Set wireless lan MIBs >
This driver uses Wireless Extension as an interface allowing you to set
Wireless LAN specific parameters.

Current driver supports "iwlist" to show the device status of nic

        iwlist wlan0 [parameters]
where

        parameter explaination          [parameters]
        -----------------------         -------------
        Show available chan and freq    freq / channel
        Show and Scan BSS and IBSS      scan[ning]
        Show supported bit-rate         rate / bit[rate]
        Show Power Management mode      power

For example:

        iwlist wlan0 channel
        iwlist wlan0 scan
        iwlist wlan0 rate
        iwlist wlan0 power


Driver also supports "iwconfig", manipulate driver private ioctls, to set MIBs.

        iwconfig wlan0 [parameters] [val]
where

        parameter explaination      [parameters]                [val]
constraints
        -----------------------     -------------
------------------
        Connect to AP by address    ap                          [essid]
        Set the essid, join (I)BSS  essid                       [mac_addr]
        Set operation mode          mode                        {Managed|Ad-hoc}
        Set keys and security mode  key / enc[ryption]
{N|open|restricted|off}


For example:

        iwconfig wlan0 ap XX:XX:XX:XX:XX:XX
        iwconfig wlan0 essid "ap_name"
        iwconfig wlan0 mode Ad-hoc
        iwconfig wlan0 mode essid "name" mode Ad-hoc
        iwconfig wlan0 key 0123456789 [2] open
        iwconfig wlan0 key off
        iwconfig wlan0 key restricted [3] 0123456789

< Getting IP address >
After start up the nic, the network needs to obtain an IP address
before transmit/receive data.
This can be done by setting the static IP via "ifconfig wlan0
IP_ADDRESS" command, or using DHCP.

If using DHCP, setting steps is as below:

        (1)connect to an AP via "iwconfig" settings
                iwconfig wlan0 essid [name]     or
                iwconfig wlan0 ap XX:XX:XX:XX:XX:XX

        (2)run the script which run the dhclient
                ./wlan0dhcp
           or
                dhcpcd wlan0
                (Some network admins require that you use the
                hostname and domainname provided by the DHCP server.
                In that case, use
                dhcpcd -HD wlan0)



< WPAPSK >
WPA_SUPPLICANT help the network to communicate under the protection of
WPAPSK mechanism

        (1)Unpack source code of WPA supplicant:
                tar -zxvf wpa_supplicant-0.4.9.tar.gz
                cd wpa_supplicant-0.4.9

        (2)Create .config file:
                cp defconfig .config

        (3)Edit .config file, uncomment the following line:
                #CONFIG_DRIVER_IPW=y.

        (4)Build WPA supplicant:
                make

        If make error for lack of <include/md5.h>, install the openssl lib:
         1. Install the openssl lib from corresponding installation disc:
            Fedora Core 2/3/4/5/6/7(openssl-0.9.71x-xx),
            Mandrake10.2/Mandriva10.2(openssl-0.9.7x-xmdk),
            Debian 3.1(libssl-dev), Suse 9.3/10.0/10.1(openssl_devl),
            Gentoo(dev-libs/openssl), etc.
         2. Download the openssl open source package from
www.openssl.org, build and install it.

        (5)Edit wpa_supplicant.conf to set up SSID and its passphrase.
        For example, the following setting in "wpa1.conf" means SSID
to join is "BufAG54_Ch6"
        and its passphrase is "87654321".

                network={
                        ssid="BufAG54_Ch6"
                        proto=WPA
                        key_mgmt=WPA-PSK
                        pairwise=CCMP TKIP
                        group=CCMP TKIP WEP104 WEP40
                        psk="87654321"
                        priority=2
                }
        Note: 1. proto=WPA for WPA, proto=RSN for WPA2.
              2. If you want to connect an AP which works under WPA2
mixed mode, you'd better
                 use Realtek customed wpa_supplicant package.


        (6)Execute WPA supplicant (Assume 8185 and related modules had
been loaded):
                ./wpa_supplicant -D ipw -c wpa1.conf -i wlan0 &
chris@ubuntu:~/Desktop/rtl8185_linux_26.1027.0823.2007$   ./makedrv
./ieee80211/
./ieee80211/ieee80211_module.c
./ieee80211/ieee80211_rx.c
./ieee80211/tags
./ieee80211/Makefile
./ieee80211/ieee80211_crypt_tkip.c
./ieee80211/ieee80211_softmac.c
./ieee80211/readme
./ieee80211/ieee80211_crypt_ccmp.c
./ieee80211/ieee80211.h
./ieee80211/ieee80211_tx.c
./ieee80211/ieee80211_softmac_wx.c
./ieee80211/ieee80211_crypt.h
./ieee80211/ieee80211_wx.c
./ieee80211/license
./ieee80211/ieee80211_crypt_wep.c
./ieee80211/ieee80211_crypt.c
rtl8185/
rtl8185/README.adhoc
rtl8185/r8180_sa2400.h
rtl8185/Makefile
rtl8185/copying
rtl8185/README.master
rtl8185/r8180.h
rtl8185/install
rtl8185/r8180_max2820.h
rtl8185/r8180_max2820.c
rtl8185/r8180_rtl8225.h
rtl8185/r8180_wx.h
rtl8185/authors
rtl8185/tags
rtl8185/r8180_pm.c
rtl8185/r8180_hw.h
rtl8185/r8180_gct.c
rtl8185/r8180_gct.h
rtl8185/r8180_rtl8225.c
rtl8185/readme
rtl8185/r8180_93cx6.h
rtl8185/ieee80211.h
rtl8185/license
rtl8185/r8180_pm.h
rtl8185/changes
rtl8185/r8180_rtl8225z2.c
rtl8185/r8180_wx.c
rtl8185/r8180_rtl8255.c
rtl8185/r8180_93cx6.c
rtl8185/r8180_sa2400.c
rtl8185/r8180_core.c
rtl8185/r8180_rtl8255.h
rtl8185/ieee80211_crypt.h
rm -f *.mod.c *.mod *.o .*.cmd *.ko
rm -rf /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/tmp
make -C /lib/modules/2.6.22.9chris1/build
M=/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211 CC=gcc
modules
make[1]: Entering directory `/usr/src/linux-source-2.6.22'
  CC [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_softmac.o
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_softmac.c:
In function 'ieee80211_softmac_init':
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_softmac.c:2236:
warning: assignment from incompatible pointer type
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_softmac.c:2237:
warning: assignment from incompatible pointer type
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_softmac.c:2238:
warning: assignment from incompatible pointer type
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_softmac.c:2239:
warning: assignment from incompatible pointer type
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_softmac.c:2240:
warning: assignment from incompatible pointer type
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_softmac.c:2241:
warning: assignment from incompatible pointer type
  CC [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_rx.o
  CC [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_tx.o
  CC [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_wx.o
  CC [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_module.o
  CC [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_softmac_wx.o
  CC [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_crypt.o
  CC [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_crypt_ccmp.o
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_crypt_ccmp.c:
In function 'ieee80211_ccmp_aes_encrypt':
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_crypt_ccmp.c:88:
warning: passing argument 1 of 'crypto_cipher_encrypt_one' from
incompatible pointer type
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_crypt_ccmp.c:
In function 'ieee80211_ccmp_init':
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_crypt_ccmp.c:110:
warning: assignment from incompatible pointer type
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_crypt_ccmp.c:127:
warning: passing argument 1 of 'crypto_free_cipher' from incompatible
pointer type
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_crypt_ccmp.c:
In function 'ieee80211_ccmp_deinit':
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_crypt_ccmp.c:144:
warning: passing argument 1 of 'crypto_free_cipher' from incompatible
pointer type
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_crypt_ccmp.c:
In function 'ieee80211_ccmp_set_key':
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_crypt_ccmp.c:422:
warning: passing argument 1 of 'crypto_cipher_setkey' from
incompatible pointer type
  CC [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_crypt_tkip.o
  CC [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_crypt_wep.o
  LD [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211-rtl.o
  LD [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_crypt-rtl.o
  LD [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_crypt_wep-rtl.o
  LD [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_crypt_tkip-rtl.o
  LD [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_crypt_ccmp-rtl.o
  Building modules, stage 2.
  MODPOST 5 modules
  CC      /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211-rtl.mod.o
  LD [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211-rtl.ko
  CC      /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_crypt-rtl.mod.o
  LD [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_crypt-rtl.ko
  CC      /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_crypt_ccmp-rtl.mod.o
  LD [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_crypt_ccmp-rtl.ko
  CC      /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_crypt_tkip-rtl.mod.o
  LD [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_crypt_tkip-rtl.ko
  CC      /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_crypt_wep-rtl.mod.o
  LD [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/ieee80211/ieee80211_crypt_wep-rtl.ko
make[1]: Leaving directory `/usr/src/linux-source-2.6.22'
rm -f *.mod.c *.mod *.o .*.cmd *.ko *~
rm -rf /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/tmp
make -C /lib/modules/2.6.22.9chris1/build
M=/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185 CC=gcc
modules
make[1]: Entering directory `/usr/src/linux-source-2.6.22'
  CC [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_core.o
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_core.c:
In function 'proc_get_stats_hw':
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_core.c:375:
warning: cast from pointer to integer of different size
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_core.c:376:
warning: cast from pointer to integer of different size
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_core.c:379:
warning: cast from pointer to integer of different size
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_core.c:380:
warning: cast from pointer to integer of different size
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_core.c:383:
warning: cast from pointer to integer of different size
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_core.c:384:
warning: cast from pointer to integer of different size
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_core.c:
In function 'check_tx_ring':
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_core.c:909:
warning: cast from pointer to integer of different size
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_core.c:909:
warning: cast from pointer to integer of different size
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_core.c:910:
warning: cast from pointer to integer of different size
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_core.c:910:
warning: cast from pointer to integer of different size
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_core.c:
In function 'alloc_tx_desc_ring':
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_core.c:1592:
warning: cast from pointer to integer of different size
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_core.c:1592:
warning: cast to pointer from integer of different size
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_core.c:
In function 'alloc_rx_desc_ring':
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_core.c:1770:
warning: cast from pointer to integer of different size
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_core.c:1770:
warning: cast to pointer from integer of different size
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_core.c:
In function 'rtl8180_init':
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_core.c:3159:
warning: assignment from incompatible pointer type
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_core.c:3522:
warning: 'deprecated_irq_flag' is deprecated (declared at
include/linux/interrupt.h:66)
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_core.c:3522:
warning: passing argument 2 of 'request_irq' from incompatible pointer
type
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_core.c:
At top level:
/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_core.c:579:
warning: 'r8180_get_wireless_stats' defined but not used
  CC [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_sa2400.o
  CC [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_93cx6.o
  CC [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_wx.o
  CC [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_max2820.o
  CC [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_gct.o
  CC [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_rtl8225.o
  CC [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_rtl8225z2.o
  CC [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180_rtl8255.o
  LD [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.o
  Building modules, stage 2.
  MODPOST 1 modules
WARNING: "ieee80211_softmac_stop_protocol_rtl"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "free_ieee80211_rtl"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_wx_get_wap_rtl"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_wake_queue_rtl"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_rx_rtl"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_wx_get_mode_rtl"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_is_shortslot"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_wx_set_freq_rtl"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_wx_get_name_rtl"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_wx_get_rate_rtl"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_wx_set_rate_rtl"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_ps_tx_ack"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_wx_get_freq_rtl"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_is_54g"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_stop_queue_rtl"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_wx_set_scan_rtl"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_wx_get_essid_rtl"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_wx_get_scan_rtl"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_wpa_supplicant_ioctl"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_wx_set_mode_rtl"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_get_beacon"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_wx_set_rawtx_rtl"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_wx_set_encode_rtl"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_stop_protocol_rtl"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_wx_set_wap_rtl"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_wx_get_power_rtl"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_wx_get_encode_rtl"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_softmac_start_protocol_rtl"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_wlan_frequencies_rtl"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_wx_set_power_rtl"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "alloc_ieee80211_rtl"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_reset_queue"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_wx_set_essid_rtl"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
WARNING: "ieee80211_start_protocol_rtl"
[/home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko]
undefined!
  CC      /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.mod.o
  LD [M]  /home/chris/Desktop/rtl8185_linux_26.1027.0823.2007/rtl8185/r8180.ko
make[1]: Leaving directory `/usr/src/linux-source-2.6.22'
chris@ubuntu:~/Desktop/rtl8185_linux_26.1027.0823.2007$ ./wlan0up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 Operation not permitted
insmod: error inserting 'ieee80211_crypt_wep-rtl.ko': -1 Operation not permitted
insmod: error inserting 'ieee80211_crypt_tkip-rtl.ko': -1 Operation
not permitted
insmod: error inserting 'ieee80211_crypt_ccmp-rtl.ko': -1 Operation
not permitted
insmod: error inserting 'ieee80211-rtl.ko': -1 Operation not permitted
insmod: error inserting 'r8180.ko': -1 Operation not permitted
wlan0: ERROR while getting interface flags: No such device
chris@ubuntu:~/Desktop/rtl8185_linux_26.1027.0823.2007$ sudo ./wlan0up
[sudo] password for chris:
wlan0: ERROR while getting interface flags: No such device
chris@ubuntu:~/Desktop/rtl8185_linux_26.1027.0823.2007$
Why does it say wlan0, no such device? I appended this to my
/etc/network/interfaces

Code:
iface wlan0 inet dhcp

auto wlan0
and I restarted the networking service.
 
Old 12-28-2007, 12:46 AM   #2
AstronomyDomine
LQ Newbie
 
Registered: Feb 2007
Distribution: Mint 15
Posts: 16

Rep: Reputation: 0
Sorry, could you post the make and model of your wireless adapter and the website where you downloaded that driver.

Thanks
 
Old 12-28-2007, 03:31 PM   #3
fakie_flip
Senior Member
 
Registered: Feb 2005
Location: San Antonio, Texas
Distribution: Gentoo Hardened using OpenRC not Systemd
Posts: 1,495

Original Poster
Rep: Reputation: 85
Quote:
Originally Posted by AstronomyDomine View Post
Sorry, could you post the make and model of your wireless adapter and the website where you downloaded that driver.

Thanks
Now I remember how I got the driver. I went to here.

http://ndiswrapper.sourceforge.net/j...3/id,list_o-z/

Then I clicked on the link for the tew-424UB driver. I was about to get the Windows driver, but then I saw there was a Linux driver.

http://www.realtek.com.tw/downloads/...Downloads=true

This is the direct download to the file I got.

ftp://209.216.61.149/cn/wlan/rtl8185...23.2007.tar.gz

lsusb shows this

$ lsusb
Bus 002 Device 008: ID 0bda:8189 Realtek Semiconductor Corp.
 
Old 12-28-2007, 03:50 PM   #4
fakie_flip
Senior Member
 
Registered: Feb 2005
Location: San Antonio, Texas
Distribution: Gentoo Hardened using OpenRC not Systemd
Posts: 1,495

Original Poster
Rep: Reputation: 85
Quote:
Originally Posted by AstronomyDomine View Post
Sorry, could you post the make and model of your wireless adapter and the website where you downloaded that driver.

Thanks
Now I remember how I got the driver. I went to here.

http://ndiswrapper.sourceforge.net/j...3/id,list_o-z/

Then I clicked on the link for the tew-424UB driver. I was about to get the Windows driver, but then I saw there was a Linux driver.

http://www.realtek.com.tw/downloads/...Downloads=true

This is the direct download to the file I got.

ftp://209.216.61.149/cn/wlan/rtl8185...23.2007.tar.gz

lsusb shows this

Code:
$ lsusb 
Bus 002 Device 008: ID 0bda:8189 Realtek Semiconductor Corp.
 
Old 12-29-2007, 12:31 AM   #5
AstronomyDomine
LQ Newbie
 
Registered: Feb 2007
Distribution: Mint 15
Posts: 16

Rep: Reputation: 0
Okay, according to

https://help.ubuntu.com/community/Ha...rkCardsRealTek

you should download the Win98 driver from here:

http://www.realtek.com.tw/downloads/...oads=true#1432

Then follow the instructions on this page:

http://ubuntuforums.org/showthread.php?t=529090



If you need help setting up ndiswrapper just ask.
 
Old 12-31-2007, 03:59 AM   #6
fakie_flip
Senior Member
 
Registered: Feb 2005
Location: San Antonio, Texas
Distribution: Gentoo Hardened using OpenRC not Systemd
Posts: 1,495

Original Poster
Rep: Reputation: 85
Quote:
Originally Posted by AstronomyDomine View Post
Okay, according to

https://help.ubuntu.com/community/Ha...rkCardsRealTek

you should download the Win98 driver from here:

http://www.realtek.com.tw/downloads/...oads=true#1432

Then follow the instructions on this page:

http://ubuntuforums.org/showthread.php?t=529090



If you need help setting up ndiswrapper just ask.
Thank you for your reply. Before I begin with ndiswrapper in Ubuntu, I'd like to uninstall the broken Linux driver for wireless. I've tried "sudo make uninstall" and "sudo ./makedrv uninstall" Neither worked. How can I uninstall it?
 
Old 12-31-2007, 07:18 AM   #7
Hangdog42
LQ Veteran
 
Registered: Feb 2003
Location: Maryland
Distribution: Slackware
Posts: 7,803
Blog Entries: 1

Rep: Reputation: 422Reputation: 422Reputation: 422Reputation: 422Reputation: 422
I've lost count, is this the third or fourth thread you've started on the exact same problem.


Stop it Fakie.
 
Old 01-01-2008, 12:26 AM   #8
AstronomyDomine
LQ Newbie
 
Registered: Feb 2007
Distribution: Mint 15
Posts: 16

Rep: Reputation: 0
If there is no such device as wlan0, then you shouldn't have anything to worry about. You can run ifconfig to make sure that no other devices were created. If none were, then you don't need to make sure the driver is uninstalled.
 
Old 01-03-2008, 09:46 PM   #9
fakie_flip
Senior Member
 
Registered: Feb 2005
Location: San Antonio, Texas
Distribution: Gentoo Hardened using OpenRC not Systemd
Posts: 1,495

Original Poster
Rep: Reputation: 85
Quote:
Originally Posted by AstronomyDomine View Post
If there is no such device as wlan0, then you shouldn't have anything to worry about. You can run ifconfig to make sure that no other devices were created. If none were, then you don't need to make sure the driver is uninstalled.
Is it possible to get this wireless usb network adapter working with 64 bit Linux. I've tried everything I know to do. Would installing ndiswrapper in a 32 bit chroot and using a 32 bit Windows driver work? Does anyone know how to get a 64 bit driver for this wireless card that isn't for Vista?
 
  


Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
"Linux supported wireless card driver for Linksys wireless-g adaptor? northcoastrat Linux - Desktop 4 07-18-2008 06:33 PM
i need CWD-854 WIRELESS-G Dongle wireless card driver for linux minhcorp Linux - Wireless Networking 2 06-14-2007 05:30 AM
ipw2200, wireless extension driver problem kellinjar Linux - General 2 07-10-2006 09:25 AM
Wireless Card Problem - wrong driver? xumvaulter Linux - Wireless Networking 0 01-25-2006 04:17 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Networking > Linux - Wireless Networking

All times are GMT -5. The time now is 11:49 AM.

Contact Us - Advertising Info - Rules - Privacy - LQ Merchandise - Donations - Contributing Member - LQ Sitemap -
Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration