windows bridge with wireless but no internet on linux
Hi all,
I have a windows bridge with a wireless card bridged with the onboard NIC. In linux I can ping the router and I have an address assigned through dhcp, but I can't get the internet through linux. Any ideas? |
What output do you get from the following commands?
/sbin/route cat /etc/resolv.conf What is the IP address of your router? |
linux:/home/bcurry # /sbin/route Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface link-local * 255.255.0.0 U 0 0 0 eth0 172.16.0.0 * 255.255.0.0 U 0 0 0 eth0 loopback * 255.0.0.0 U 0 0 0 lo default homeportal.gate 0.0.0.0 UG 0 0 0 eth0 linux:/home/bcurry # linux:/home/bcurry # cat /etc/resolv.conf ### BEGIN INFO # # Modified_by: dhcpcd # Backup: /etc/resolv.conf.saved.by.dhcpcd.eth0 # Process: dhcpcd # Process_id: 7513 # Script: /sbin/modify_resolvconf # Saveto: # Info: This is a temporary resolv.conf created by service dhcpcd. # The previous file has been saved and will be restored later. # # If you don't like your resolv.conf to be changed, you # can set MODIFY_{RESOLV,NAMED}_CONF_DYNAMICALLY=no. This # variables are placed in /etc/sysconfig/network/config. # # You can also configure service dhcpcd not to modify it. # # If you don't like dhcpcd to change your nameserver # settings # then either set DHCLIENT_MODIFY_RESOLV_CONF=no # in /etc/sysconfig/network/dhcp, or # set MODIFY_RESOLV_CONF_DYNAMICALLY=no in # /etc/sysconfig/network/config or (manually) use dhcpcd # with -R. If you only want to keep your searchlist, set # DHCLIENT_KEEP_SEARCHLIST=yes in /etc/sysconfig/network/dhcp or # (manually) use the -K option. # ### END INFO search gateway.2wire.net site nameserver 172.16.0.1 linux:/home/bcurry # The IP address of my router is 172.16.0.1 Thanks. |
It's working now!
|
All times are GMT -5. The time now is 09:29 AM. |