What "wireless=unassociated" means?
Hi, friends.
Few days ago, I decided change to Ubuntu 18.10 (I come from W10). The problem is that I have to use a TP-Link adaptor and my connection is broken. I thougth that could be because I didn't installed the correct driver but when I saw well, I realized that the driver was installed. Then, I typed lshw -c network and the last part of the command's output says this: driver=rtl8192cu multicast=yes wireless=unassociated. I compared this output with other output(this is a laptop that work well) and they are differents because the output of the other computer is this: driver=rtl8192cu multicast=yes wireless=IEEE 802.11. I need to know what wireless=unassociated means and if this can be the problem of my connection. If that is the problem, how do I can fix it? I appreciate if you can help me. |
A web search for "wireless=unassociated linux" will turn up many results, so many that I hesitate to select just one or two to recommend to you.
|
Quote:
They claim to be "Linux compatible", but aren't. At least not on recent kernels - the vendor released a driver ages ago, and hasn't kept up with kernel changes. Depending on chipset, you can probably find someone on github maintaining the driver for you, but it will be a source package that needs compiling and installing, and may need this regularly. See if you can find one that is well documented and uses dkms to help with new kernel installs. Basically the hardware is recognised, but can't talk to your router as it has no working driver module. |
Quote:
________ The BACKUP doesn't matter because this computer is new. It haven't nothing of information. |
Check to see that your laptop doesn't have a wifi on/off switch, physical or a function key control.
Also check to see if it is switched off in software, ie wicd, network manager. |
Quote:
Thank you! |
Seems I didn't read your initial post very well - what distro/kernel gets a good connection ?. Try these commands in a terminal should tell us (note the underscore character in the first command).
Code:
lsb_release -a |
Back to your opening post comments...
Quote:
Since you're an Ubuntu user.... https://help.ubuntu.com/stable/ubunt...s-connect.html |
Quote:
Quote:
When I typed Quote:
Quote:
Quote:
Quote:
|
Quote:
I was reading the article that you send me and I saw that my TP-Link model not appear in those lists, I have WN8200ND model. will be that if I buy a model that appears in those lists, my connection work? Really I don't know what to do , almost 2 weeks without internet. What do you recommend me? |
Quote:
1. This command will display details of connected USB devices and any drivers associated with the device. Code:
usb-devices 2. What network device nodes are present? (when the wireless device is plugged in) Code:
ip a |
2 Attachment(s)
Quote:
Okay, I updated my driver to a new versión ( rtl8192cu ) because it didn't has it. Also, I checked my Interfaces with this command vim /etc/network/interfaces and only appeared this: Code:
auto lo Of course, also try the commands that you recommend me. Bellow, I've uploaded two images that shows the output of Code:
usb-devices Code:
ip a I appreciate so much your help. :thumbsup: |
Ok, that output confirms that the rtl8192cu driver is loaded, and the 'ip a' command shows that a wireless network device node (wlec086b105627) is present. I'm not an Ubuntu user, but there should be a network management tool available to configure this device to connect to your wireless network. Did the instructions in the link I gave not work with getting connected?
Quote:
|
Quote:
Before I updated my driver, the networks appeared and I typed the password but always it said: Failed Connection Later that I updated my driver, the networks appeared, also, and I tried to enter the password but says that Password Incorrec and that's not true because I tryed thousands times with correct password and appears same. It shows like if it will try connect, but never it connect. That's it |
Ok. This may be an issue unique to Ubuntu. I'm not an Ubuntu user so it would be good for someone who is to chime in here. Anyway, from what I've read so far, it is apparently using a utility called Netplan to manage networking. It can use the systemd-networkd or NetworkManager backend to do the actual connection management. Wifi connections use NetworkManager.
We might be able to get a better idea on what is not working if you examine NetworkManager when trying to connect. To do that oprn a terminal window and run Code:
sudo journalctl -f Code:
sudo journalctl -f > output.txt FWIW, I've read at least one post that suggested that 'wpasupplicant' package was missing (needed for encrypted wifi connections), so that may be worth looking at, but your log output will quickly tell us if that is an issue here. |
All times are GMT -5. The time now is 12:03 AM. |