LinuxQuestions.org
Share your knowledge at the LQ Wiki.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Networking > Linux - Wireless Networking
User Name
Password
Linux - Wireless Networking This forum is for the discussion of wireless networking in Linux.

Notices


Reply
  Search this Thread
Old 11-19-2005, 09:23 AM   #16
nkp
LQ Newbie
 
Registered: Nov 2005
Location: US
Posts: 1

Rep: Reputation: 0
VPN Client Apani.com: mishim.o: unresolved symbol do_checksum_ offload


Installation of VPN client software version 3.3 on RH Ent Linux WS 3 (2.4.21-37.EL) failed. Has anyone successfully get this verison of software to work? There's no compilation error but failed during installation (see below).

Here's the screen captured during src-rpm rebuild and during rpm installation.

prompt> rpm --rebuild cvc_linux-rh-gcc3-3[1].3-0.src.rpm
Installing cvc_linux-rh-gcc3-3[1].3-0.src.rpm
warning: user nllib does not exist - using root
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.66512
+ umask 022
+ cd /usr/src/redhat/BUILD
+ LANG=C
+ export LANG
+ unset DISPLAY
++ uname -r
++ cut -b 1-3
+ KERNEL_VERSION=2.4
+ '[' 2.4 = 2.2 ']'
+ '[' 2.4 '!=' 2.4 ']'
++ which make
+ MAKE=/usr/bin/make
+ '[' '!' /usr/bin/make ']'
++ which gcc
+ GCC=/usr/bin/gcc
+ '[' '!' /usr/bin/gcc ']'
+ cd /usr/src/redhat/BUILD
+ rm -rf cvc_linux-rh-gcc3-3.3
+ /usr/bin/gzip -dc /usr/src/redhat/SOURCES/cvc_linux-rh-gcc3-3.3.tar.gz
+ tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd cvc_linux-rh-gcc3-3.3
++ /usr/bin/id -u
+ '[' 0 = 0 ']'
+ /bin/chown -Rhf root .
++ /usr/bin/id -u
+ '[' 0 = 0 ']'
+ /bin/chgrp -Rhf root .
+ /bin/chmod -Rf a+rX,g-w,o-w .
+ exit 0
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.66512
+ umask 022
+ cd /usr/src/redhat/BUILD
+ cd cvc_linux-rh-gcc3-3.3
+ LANG=C
+ export LAN
+ unset DISPLAY
+ make all
cd src && make all
make[1]: Entering directory `/usr/src/redhat/BUILD/cvc_linux-rh-gcc3-3.3/src'
1
cc -D__KERNEL__ -DMODULE -O -w -c -I/usr/src/linux/include -I/usr/src/linux-2.4/include -I/usr/include nlvcard.c
cc -D__KERNEL__ -DMODULE -O -w -c -I/usr/src/linux/include -I/usr/src/linux-2.4/include -I/usr/include linux_wrapper_as3.c
ld -r linux_wrapper_as3.o -e init_module -o mishim.o -L. --whole-archive -lmishim-2.4 \
--no-whole-archive -lnlcmp -lz -llzs
make[1]: Leaving directory `/usr/src/redhat/BUILD/cvc_linux-rh-gcc3-3.3/src'
+ exit 0
Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.823
+ umask 022
+ cd /usr/src/redhat/BUILD
+ cd cvc_linux-rh-gcc3-3.3
+ LANG=C
+ export LANG
+ unset DISPLAY
+ ROOT=/tmp/cvc_linux-rh-gcc3
+ K_APPLNK=/tmp/cvc_linux-rh-gcc3/etc/netlock/kmenudir
+ G_APPLNK=/tmp/cvc_linux-rh-gcc3/etc/netlock/gmenudir
+ install -m 744 etc/netlock/nleac -D /tmp/cvc_linux-rh-gcc3/etc/netlock/nleac
+ install -m 744 etc/netlock/inm -D /tmp/cvc_linux-rh-gcc3/etc/netlock/inm
+ install -m 744 scripts/netlock -D /tmp/cvc_linux-rh-gcc3/etc/rc.d/init.d/netlock
+ install -m 644 etc/netlock/mib2.mib -D /tmp/cvc_linux-rh-gcc3/etc/netlock/mib2.mib
+ install -m 644 src/mishim.o -D /tmp/cvc_linux-rh-gcc3/etc/netlock/mishim.o
+ install -m 644 src/nlvcard.o -D /tmp/cvc_linux-rh-gcc3/etc/netlock/nlvcard.o
+ install -m 644 readme.txt -D /tmp/cvc_linux-rh-gcc3/etc/netlock/readme.txt
+ install -m 644 license.txt -D /tmp/cvc_linux-rh-gcc3/etc/netlock/license.txt
+ install -m 644 netlock.agent.copyright -D /tmp/cvc_linux-rh-gcc3/etc/netlock/netlock.agent.copyright
+ install -m 644 etc/netlock/netlock.png -D /tmp/cvc_linux-rh-gcc3/etc/netlock/netlock.png
+ install -m 744 etc/netlock/cvc -D /tmp/cvc_linux-rh-gcc3/usr/bin/cvc
+ install -m 755 scripts/start_cvc -D /tmp/cvc_linux-rh-gcc3/usr/bin/start_cvc
+ install -m 644 gmenudir/.directory -D /tmp/cvc_linux-rh-gcc3/etc/netlock/gmenudir/.directory
+ install -m 644 gmenudir/.order -D /tmp/cvc_linux-rh-gcc3/etc/netlock/gmenudir/.order
+ install -m 644 gmenudir/aboutnl.desktop -D /tmp/cvc_linux-rh-gcc3/etc/netlock/gmenudir/aboutnl.desktop
+ install -m 644 gmenudir/extclien.desktop -D /tmp/cvc_linux-rh-gcc3/etc/netlock/gmenudir/extclien.desktop
+ install -m 644 gmenudir/logctrl.desktop -D /tmp/cvc_linux-rh-gcc3/etc/netlock/gmenudir/logctrl.desktop
+ install -m 644 kmenudir/.directory -D /tmp/cvc_linux-rh-gcc3/etc/netlock/kmenudir/.directory
+ install -m 644 kmenudir/.order -D /tmp/cvc_linux-rh-gcc3/etc/netlock/kmenudir/.order
+ install -m 644 kmenudir/aboutnl.kdelnk -D /tmp/cvc_linux-rh-gcc3/etc/netlock/kmenudir/aboutnl.kdelnk
+ install -m 644 kmenudir/extclien.kdelnk -D /tmp/cvc_linux-rh-gcc3/etc/netlock/kmenudir/extclien.kdelnk
+ install -m 644 kmenudir/logctrl.kdelnk -D /tmp/cvc_linux-rh-gcc3/etc/netlock/kmenudir/logctrl.kdelnk
+ install -m 644 etc/netlock/nl-help.tar.gz -D /tmp/cvc_linux-rh-gcc3/etc/netlock/nl-help.tar.gz
+ install -m 644 vfolders/nl-gnome-extclient.desktop -D /tmp/cvc_linux-rh-gcc3/etc/netlock/vfolders/nl-gnome-extclient.desktop
+ install -m 644 vfolders/nl-kde-extclient.desktop -D /tmp/cvc_linux-rh-gcc3/etc/netlock/vfolders/nl-kde-extclient.desktop
+ /usr/lib/rpm/find-debuginfo.sh /usr/src/redhat/BUILD/cvc_linux-rh-gcc3-3.3
0 blocks
+ /usr/lib/rpm/redhat/brp-compress
+ /usr/lib/rpm/redhat/brp-strip /usr/bin/strip
+ /usr/lib/rpm/redhat/brp-strip-static-archive /usr/bin/strip
+ /usr/lib/rpm/redhat/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump
Processing files: cvc_linux-rh-gcc3-3.3-0
Processing files: cvc_linux-rh-gcc3-debuginfo-3.3-0
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Checking for unpackaged file(s): /usr/lib/rpm/check-files /tmp/cvc_linux-rh-gcc3
Wrote: /usr/src/redhat/RPMS/i386/cvc_linux-rh-gcc3-3.3-0.i386.rpm
Wrote: /usr/src/redhat/RPMS/i386/cvc_linux-rh-gcc3-debuginfo-3.3-0.i386.rpm
Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.56270
+ umask 022
+ cd /usr/src/redhat/BUILD
+ cd cvc_linux-rh-gcc3-3.3
+ rm -rf /usr/src/redhat/BUILD/cvc_linux-rh-gcc3-3.3
+ exit 0
Executing(--clean): /bin/sh -e /var/tmp/rpm-tmp.56270
+ umask 022
+ cd /usr/src/redhat/BUILD
+ rm -rf cvc_linux-rh-gcc3-3.3
+ exit 0

prompt> rpm -ivh /usr/src/RPMS/i386/cvc_linux-rh-gcc3-3.3-0.i386.rpm
Preparing... ########################################### [100%]

END-USER LICENSE AGREEMENT ("AGREEMENT")

[snip]

Do you accept the above license agreement? [y, n] y

Installing Nortel Networks Contivity VPN Client. Please wait...

1:cvc_linux-rh-gcc3 ########################################### [100%]

Starting Netlock services: /etc/netlock/mishim.o: unresolved symbol do_checksum_offload
/etc/netlock/mishim.o:
 
Old 12-05-2005, 06:13 PM   #17
sganesh
LQ Newbie
 
Registered: Oct 2005
Posts: 3

Rep: Reputation: 0
Quote:
Originally Posted by sn9ke_eyes
I don't know why it wouldn't be, but netfiltering must be enabled in your kernel.

I did enable the SuSE firewall which enables iptables. Doesn't iptables include netfiltering. My lsmod looks like this:

Module Size Used by
ipt_pkttype 1664 1
ipt_TCPMSS 4352 1
ipt_LOG 6912 15
ipt_limit 2304 15
vmnet 30756 16
vmmon 102628 0
cpufreq_ondemand 6044 1
cpufreq_userspace 4444 0
cpufreq_powersave 1792 0
speedstep_centrino 7508 1
freq_table 4612 1 speedstep_centrino
usb_storage 72512 0
snd_pcm_oss 59168 0
snd_mixer_oss 18944 2 snd_pcm_oss
snd_seq 51984 1
snd_seq_device 8588 1 snd_seq
usbhid 43616 0
button 7056 0
battery 10244 0
ac 5252 0
i915 18944 1
drm 61844 2 i915
af_packet 21384 1
edd 9824 0
joydev 9408 0
pcmcia 37176 0
firmware_class 9856 1 pcmcia
ndiswrapper 163188 0
yenta_socket 23820 1
rsrc_nonstatic 12800 1 yenta_socket
pcmcia_core 39952 3 pcmcia,yenta_socket,rsrc_nonstatic
snd_intel8x0 33408 5
ehci_hcd 32136 0
snd_ac97_codec 90876 1 snd_intel8x0
tg3 97412 0
generic 4484 0 [permanent]
ide_core 122380 2 usb_storage,generic
snd_ac97_bus 2432 1 snd_ac97_codec
snd_pcm 93064 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 24452 2 snd_seq,snd_pcm
snd 60420 17 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 9184 2 snd
snd_page_alloc 10632 2 snd_intel8x0,snd_pcm
pci_hotplug 26164 0
uhci_hcd 32016 0
usbcore 112640 6 usb_storage,usbhid,ndiswrapper,ehci_hcd,uhci_hcd
intel_agp 22044 1
agpgart 33096 3 drm,intel_agp
parport_pc 38980 1
lp 11460 0
parport 33864 2 parport_pc,lp
ip6t_REJECT 5504 3
ipt_REJECT 5632 3
ipt_state 1920 30
iptable_mangle 2688 0
iptable_nat 22228 0
iptable_filter 2816 1
ip6table_mangle 2304 0
ip_conntrack 42168 2 ipt_state,iptable_nat
ip_tables 19456 9 ipt_pkttype,ipt_TCPMSS,ipt_LOG,ipt_limit,ipt_REJECT,ipt_state,iptable_mangle,iptable_nat,iptable_fil ter
ip6table_filter 2688 1
ip6_tables 18176 3 ip6t_REJECT,ip6table_mangle,ip6table_filter
ipv6 242752 11 ip6t_REJECT
nls_iso8859_15 4608 1
nls_cp437 5760 1
vfat 12800 1
fat 49692 1 vfat
dm_mod 54972 0
reiserfs 250480 1
fan 4996 0
thermal 14472 0
processor 24252 2 speedstep_centrino,thermal
sg 35744 0
ata_piix 9860 3
ahci 12292 0
libata 48516 2 ata_piix,ahci
sd_mod 18576 5
scsi_mod 131304 5 usb_storage,sg,ahci,libata,sd_mod


I get the same errors:


linux2:/home/sganesh/cvc33 # make all
cd src && make all
make[1]: Entering directory `/home/sganesh/cvc33/src'
cd k2.6 && make
make[2]: Entering directory `/home/sganesh/cvc33/src/k2.6'
make -C /lib/modules/2.6.13-15-default/build SUBDIRS=/home/sganesh/cvc33/src/k2.6 modules
make[3]: Entering directory `/usr/src/linux-2.6.13-15-obj/i386/default'
make -C ../../../linux-2.6.13-15 O=../linux-2.6.13-15-obj/i386/default modules
CC [M] /home/sganesh/cvc33/src/k2.6/linux_wrapper.o
/home/sganesh/cvc33/src/k2.6/linux_wrapper.c: In function ‘register_nl_netfilter’:
/home/sganesh/cvc33/src/k2.6/linux_wrapper.c:194: error: implicit declaration of function ‘nl_nf_register_hook’
/home/sganesh/cvc33/src/k2.6/linux_wrapper.c: In function ‘nl_skb_dup’:
/home/sganesh/cvc33/src/k2.6/linux_wrapper.c:527: error: ‘struct sk_buff’ has no member named ‘security’
/home/sganesh/cvc33/src/k2.6/linux_wrapper.c:527: error: ‘struct sk_buff’ has no member named ‘security’
/home/sganesh/cvc33/src/k2.6/linux_wrapper.c: In function ‘nlshim_init’:
/home/sganesh/cvc33/src/k2.6/linux_wrapper.c:662: error: implicit declaration of function ‘mishim_init’
/home/sganesh/cvc33/src/k2.6/linux_wrapper.c: In function ‘nlshim_exit’:
/home/sganesh/cvc33/src/k2.6/linux_wrapper.c:667: error: implicit declaration of function ‘mishim_uninit’
make[6]: *** [/home/sganesh/cvc33/src/k2.6/linux_wrapper.o] Error 1
make[5]: *** [_module_/home/sganesh/cvc33/src/k2.6] Error 2
make[4]: *** [modules] Error 2
make[3]: *** [modules] Error 2
make[3]: Leaving directory `/usr/src/linux-2.6.13-15-obj/i386/default'
make[2]: *** [kmod_build] Error 2
make[2]: Leaving directory `/home/sganesh/cvc33/src/k2.6'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/home/sganesh/cvc33/src'
make: *** [all] Error 2

What am I missing ?
 
Old 01-30-2006, 09:52 PM   #18
1spook
LQ Newbie
 
Registered: Jan 2006
Posts: 1

Rep: Reputation: 0
SuSE 10 install and fully functional Apani vpn client

Got this from scorp123 from linux forums dot org

I was able to get everything working with the firewall turned on during compile, the default kernel settings and all the latest patches from SuSE.

cd to where you unzipped/tarred the apani client.

Edit this file: src/k2.6/linux_wrapper.c ... e.g. kate src/k2.6/linux_wrapper.c

1.) Go to line 527 and add two slashes on the beginning: // (you are commenting out that line so it does not get compiled any more)

2.) Go to line 174: insert the code lines below before the function definition register_nl_netfilter

int nl_nf_register_hook(struct nf_hook_ops *reg);
int mishim_init();
int mishim_uninit();


3.) run "make all" and "make install"

4.) Go to /etc/init.d ... check the symbolic links in /etc/init.d/rc3.d and /etc/init.d/rc5.d ... They are probably named "S50netlock" and "K10netlock". Check if they are indeed pointing to the correct file /etc/init.d/netlock ... For some odd reasons the netlock script wants to install itself into a bogus location such as /etc/rc.d/init.d (where that last "init.d" sometimes is a symbolic link: init.d --> . ... sometimes it's a subdirectory, depending on the version). In any case you should correct that to make sure the script gets properly executed upon system boot and runlevel changes.

5.) Reboot your machine. While booting, press Esc if necessary so you can see the boot messages. Check if the VPN client gets correctly started.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Cisco VPN Client installation error lyoshenka Linux - Software 1 10-27-2005 05:55 AM
Installation problem with cisco vpn client 4.0 on Suse 9.3 BeGosV Linux - Software 1 08-22-2005 12:12 PM
Cisco VPN client 4.6 on Knoppix 3.8 Installation Problem ldonkers Linux - Networking 0 04-22-2005 11:29 PM
Problem with installation of a VPN - PPTP client l2g Linux - Networking 1 12-24-2004 01:37 AM
How do i connect Ciscos VPN client to Checkpoint VPN server Klas Linux - Networking 1 11-29-2003 08:00 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Networking > Linux - Wireless Networking

All times are GMT -5. The time now is 08:41 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration