LinuxQuestions.org
Download your favorite Linux distribution at LQ ISO.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Networking > Linux - Wireless Networking
User Name
Password
Linux - Wireless Networking This forum is for the discussion of wireless networking in Linux.

Notices


Reply
  Search this Thread
Old 10-10-2004, 12:04 PM   #1
beetlebug
LQ Newbie
 
Registered: Oct 2004
Posts: 1

Rep: Reputation: 0
trouble compiling raconfig


I have a question about the RaConfig tool and hope you can help me out.

My machine is configured for development and I have (as far as I know) all
dev. tools installed (make, QT3 etc.)
I get stuck at the point of configuring/compiling RaConfig.

My wish is to use it as Master (AP configuration as in XP)
I hope it is a simple thing that I overlook..

Thanks for your time in advance..

Fred Dresken (BeetleBug66)

This is my shell output off ifstatus ra0

linux:~ # ifstatus ra0
_ _ ra0
_ _ ra0 _ _ _ configuration: wlan-ra0
_ _ ra0 _ _ _ is down
linux:~ # ifconfig ra0 up
linux:~ # ifstatus ra0
_ _ ra0
_ _ ra0 _ _ _ configuration: wlan-ra0
ra0 is up
4: ra0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
_ _ link/ether 00:0c:6e:c4:08:9f brd ff:ff:ff:ff:ff:ff
_ _ inet6 fe80::20c:6eff:fec4:89f/64 scope link
_ _ _ _valid_lft forever preferred_lft forever
Configured routes for interface ra0:
_ default 192.168.0.1 - -
0 of 1 configured routes for interface ra0 up
ra0 _ _ _ RT2400PCI _ESSIDff/any
_ _ _ _ _ Mode:Managed _Channel=1 _Bit Rate:11Mb/s
_ _ _ _ _ RTS thrff _ Fragment thrff
_ _ _ _ _ Encryption keyff
_ _ _ _ _ Link Quality:0 _Signal level:0 _Noise level:0
_ _ _ _ _ Rx invalid nwid:0 _invalid crypt:0 _invalid misc

This is the content off ifcfg-wlan0-ra0:

BOOTPROTO='static'
BROADCAST='192.168.0.255'
IPADDR='192.168.0.16'
MTU=''
NETMASK='255.255.255.0'
NETWORK='192.168.0.0'
REMOTE_IPADDR=''
STARTMODE='onboot'
WIRELESS_AP='wireless78'
WIRELESS_AUTH_MODE='open'
WIRELESS_BITRATE=''
WIRELESS_CHANNEL='11'
WIRELESS_DEFAULT_KEY='0'
WIRELESS_ESSID='asus-ht-1033f'
WIRELESS_KEY=''
WIRELESS_KEY_0='h:wireless78'
WIRELESS_KEY_1=''
WIRELESS_KEY_2=''
WIRELESS_KEY_3=''
WIRELESS_KEY_LENGTH='128'
WIRELESS_MODE='Master'
WIRELESS_NICK=''
WIRELESS_NWID=''
WIRELESS_POWER='no'
_nm_name='RT2400'


The driver works and the hardware is found.
I include my compile shell output so that my story is clear.

linux:~ # rpm -qa | grep qt
qt3-static-3.3.1-41.14
yast2-qt-2.9.24-0.4
qt3-examples-3.3.1-32
qt3-devel-tools-3.3.1-32
qt3-non-mt-3.3.1-41.14
qt3-devel-doc-3.3.1-33
qt3-unixODBC-3.3.1-32
qtpcr-1.1.3-589
qt3-3.3.1-36.16
qt3-devel-3.3.1-33
qt3-sqlite-3.3.1-32
qt3-mysql-3.3.1-32
qt3-extensions-3.3.1-32
qt3-man-3.3.1-32
linux:~ #
linux:~ #
linux:~ #
linux:~ # rpm -qa | grep kernel

kernel-source-2.6.5-7.108
kernel-default-2.6.5-7.108
linux:~ #
linux:~ #
linux:~ #
linux:~ # ls -l /usr/src/
total 1
drwxr-xr-x _ 8 root root _312 Oct 10 02:14 .
drwxr-xr-x _12 root root _344 Oct _9 22:36 ..
drwxr-xr-x _ 3 fred users 312 Oct 10 02:14 firefox-installer
drwxr-xr-x _ 8 root root _272 Oct _9 22:33 kernel-modules
lrwxrwxrwx _ 1 root root _ 17 Oct _8 23:13 linux -> linux-2.6.5-7.108
drwxr-xr-x _20 root root _752 Oct _9 23:31 linux-2.6.5-7.108
drwxr-xr-x _ 3 root root _112 Aug 25 20:33 linux-2.6.5-7.108-obj
lrwxrwxrwx _ 1 root root _ 21 Oct _8 23:13 linux-obj -> linux-2.6.5-7.108-obj
drwxr-xr-x _ 7 root root _168 Oct _7 19:38 packages
drwxr-xr-x _ 4 fred users 200 Oct _9 01:09 rt2400-1.2.1
linux:~ #
linux:~ #
linux:~ #
linux:~ # ls -l /lib/modules/linux-2.6.5-7.108-obj/
/bin/ls: /lib/modules/linux-2.6.5-7.108-obj/: No such file or directory
linux:~ # ls -l /lib/modules/linux-2.6.5-7.108/
/bin/ls: /lib/modules/linux-2.6.5-7.108/: No such file or directory
linux:~ #
linux:~ #
linux:~ #
linux:~ # ls -l /lib/modules/2.6.3-7mdk/
/bin/ls: /lib/modules/2.6.3-7mdk/: No such file or directory
linux:~ #
linux:~ #
linux:~ #
linux:~ # cd /usr/src/rt2400-1.2.1/Module/
linux:/usr/src/rt2400-1.2.1/Module # make
make[1]: Entering directory `/usr/src/linux-2.6.5-7.108-obj/i386/default'
make -C ../../../linux-2.6.5-7.108 O=../linux-2.6.5-7.108-obj/i386/default
modules

WARNING: Symbol version
dump /usr/src/linux-2.6.5-7.108-obj/i386/default/Module.symvers is _missing,
modules will have CONFIG_MODVERSIONS disabled.

_ Building modules, stage 2.
_ MODPOST
make[1]: Leaving directory `/usr/src/linux-2.6.5-7.108-obj/i386/default'
linux:/usr/src/rt2400-1.2.1/Module # make install
install 'rt2400.ko'
to /lib/modules/2.6.5-7.108-default/kernel/drivers/net/wireless
install -m 644 -o 0 -g 0
-d /lib/modules/2.6.5-7.108-default/kernel/drivers/net/wireless
install -m 644 -o 0 -g 0
rt2400.ko /lib/modules/2.6.5-7.108-default/kernel/drivers/net/wireless
/sbin/depmod -a
linux:/usr/src/rt2400-1.2.1/Module #
linux:/usr/src/rt2400-1.2.1/Module #
linux:/usr/src/rt2400-1.2.1/Module #
linux:/usr/src/rt2400-1.2.1/Module # cd /usr/src/rt2400-1.2.1/Utility/
linux:/usr/src/rt2400-1.2.1/Utility #
linux:/usr/src/rt2400-1.2.1/Utility #
linux:/usr/src/rt2400-1.2.1/Utility #
linux:/usr/src/rt2400-1.2.1/Utility # ./Configure


----------- Configure Ralink RT2400 Configuration Utility for Compile
-----------


We recommend you use the new version qt-x11-free-3.1.1 or later
Otherwise make could be failed.

QT directory: _[/usr/lib/qt3]: make
QT tree 'make' is incomplete or missing!

Configuration failed

linux:/usr/src/rt2400-1.2.1/Utility #
linux:/usr/src/rt2400-1.2.1/Utility #
linux:/usr/src/rt2400-1.2.1/Utility #
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
trouble compiling w/c++ eroica Linux - Software 4 03-09-2005 03:17 PM
trouble compiling fretbrner Slackware 1 01-31-2005 01:30 PM
Trouble compiling anything banZera Slackware 4 04-07-2004 11:19 AM
Trouble with compiling gamehack Debian 3 01-11-2004 09:35 AM
Trouble compiling QT program vapebait Programming 2 11-25-2003 03:23 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Networking > Linux - Wireless Networking

All times are GMT -5. The time now is 01:36 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration