LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Wireless Networking (https://www.linuxquestions.org/questions/linux-wireless-networking-41/)
-   -   trouble compiling raconfig (https://www.linuxquestions.org/questions/linux-wireless-networking-41/trouble-compiling-raconfig-240973/)

beetlebug 10-10-2004 12:04 PM

trouble compiling raconfig
 
I have a question about the RaConfig tool and hope you can help me out.

My machine is configured for development and I have (as far as I know) all
dev. tools installed (make, QT3 etc.)
I get stuck at the point of configuring/compiling RaConfig.

My wish is to use it as Master (AP configuration as in XP)
I hope it is a simple thing that I overlook..

Thanks for your time in advance..

Fred Dresken (BeetleBug66)

This is my shell output off ifstatus ra0

linux:~ # ifstatus ra0
_ _ ra0
_ _ ra0 _ _ _ configuration: wlan-ra0
_ _ ra0 _ _ _ is down
linux:~ # ifconfig ra0 up
linux:~ # ifstatus ra0
_ _ ra0
_ _ ra0 _ _ _ configuration: wlan-ra0
ra0 is up
4: ra0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
_ _ link/ether 00:0c:6e:c4:08:9f brd ff:ff:ff:ff:ff:ff
_ _ inet6 fe80::20c:6eff:fec4:89f/64 scope link
_ _ _ _valid_lft forever preferred_lft forever
Configured routes for interface ra0:
_ default 192.168.0.1 - -
0 of 1 configured routes for interface ra0 up
ra0 _ _ _ RT2400PCI _ESSID:off/any
_ _ _ _ _ Mode:Managed _Channel=1 _Bit Rate:11Mb/s
_ _ _ _ _ RTS thr:off _ Fragment thr:off
_ _ _ _ _ Encryption key:off
_ _ _ _ _ Link Quality:0 _Signal level:0 _Noise level:0
_ _ _ _ _ Rx invalid nwid:0 _invalid crypt:0 _invalid misc

This is the content off ifcfg-wlan0-ra0:

BOOTPROTO='static'
BROADCAST='192.168.0.255'
IPADDR='192.168.0.16'
MTU=''
NETMASK='255.255.255.0'
NETWORK='192.168.0.0'
REMOTE_IPADDR=''
STARTMODE='onboot'
WIRELESS_AP='wireless78'
WIRELESS_AUTH_MODE='open'
WIRELESS_BITRATE=''
WIRELESS_CHANNEL='11'
WIRELESS_DEFAULT_KEY='0'
WIRELESS_ESSID='asus-ht-1033f'
WIRELESS_KEY=''
WIRELESS_KEY_0='h:wireless78'
WIRELESS_KEY_1=''
WIRELESS_KEY_2=''
WIRELESS_KEY_3=''
WIRELESS_KEY_LENGTH='128'
WIRELESS_MODE='Master'
WIRELESS_NICK=''
WIRELESS_NWID=''
WIRELESS_POWER='no'
_nm_name='RT2400'


The driver works and the hardware is found.
I include my compile shell output so that my story is clear.

linux:~ # rpm -qa | grep qt
qt3-static-3.3.1-41.14
yast2-qt-2.9.24-0.4
qt3-examples-3.3.1-32
qt3-devel-tools-3.3.1-32
qt3-non-mt-3.3.1-41.14
qt3-devel-doc-3.3.1-33
qt3-unixODBC-3.3.1-32
qtpcr-1.1.3-589
qt3-3.3.1-36.16
qt3-devel-3.3.1-33
qt3-sqlite-3.3.1-32
qt3-mysql-3.3.1-32
qt3-extensions-3.3.1-32
qt3-man-3.3.1-32
linux:~ #
linux:~ #
linux:~ #
linux:~ # rpm -qa | grep kernel

kernel-source-2.6.5-7.108
kernel-default-2.6.5-7.108
linux:~ #
linux:~ #
linux:~ #
linux:~ # ls -l /usr/src/
total 1
drwxr-xr-x _ 8 root root _312 Oct 10 02:14 .
drwxr-xr-x _12 root root _344 Oct _9 22:36 ..
drwxr-xr-x _ 3 fred users 312 Oct 10 02:14 firefox-installer
drwxr-xr-x _ 8 root root _272 Oct _9 22:33 kernel-modules
lrwxrwxrwx _ 1 root root _ 17 Oct _8 23:13 linux -> linux-2.6.5-7.108
drwxr-xr-x _20 root root _752 Oct _9 23:31 linux-2.6.5-7.108
drwxr-xr-x _ 3 root root _112 Aug 25 20:33 linux-2.6.5-7.108-obj
lrwxrwxrwx _ 1 root root _ 21 Oct _8 23:13 linux-obj -> linux-2.6.5-7.108-obj
drwxr-xr-x _ 7 root root _168 Oct _7 19:38 packages
drwxr-xr-x _ 4 fred users 200 Oct _9 01:09 rt2400-1.2.1
linux:~ #
linux:~ #
linux:~ #
linux:~ # ls -l /lib/modules/linux-2.6.5-7.108-obj/
/bin/ls: /lib/modules/linux-2.6.5-7.108-obj/: No such file or directory
linux:~ # ls -l /lib/modules/linux-2.6.5-7.108/
/bin/ls: /lib/modules/linux-2.6.5-7.108/: No such file or directory
linux:~ #
linux:~ #
linux:~ #
linux:~ # ls -l /lib/modules/2.6.3-7mdk/
/bin/ls: /lib/modules/2.6.3-7mdk/: No such file or directory
linux:~ #
linux:~ #
linux:~ #
linux:~ # cd /usr/src/rt2400-1.2.1/Module/
linux:/usr/src/rt2400-1.2.1/Module # make
make[1]: Entering directory `/usr/src/linux-2.6.5-7.108-obj/i386/default'
make -C ../../../linux-2.6.5-7.108 O=../linux-2.6.5-7.108-obj/i386/default
modules

WARNING: Symbol version
dump /usr/src/linux-2.6.5-7.108-obj/i386/default/Module.symvers is _missing,
modules will have CONFIG_MODVERSIONS disabled.

_ Building modules, stage 2.
_ MODPOST
make[1]: Leaving directory `/usr/src/linux-2.6.5-7.108-obj/i386/default'
linux:/usr/src/rt2400-1.2.1/Module # make install
install 'rt2400.ko'
to /lib/modules/2.6.5-7.108-default/kernel/drivers/net/wireless
install -m 644 -o 0 -g 0
-d /lib/modules/2.6.5-7.108-default/kernel/drivers/net/wireless
install -m 644 -o 0 -g 0
rt2400.ko /lib/modules/2.6.5-7.108-default/kernel/drivers/net/wireless
/sbin/depmod -a
linux:/usr/src/rt2400-1.2.1/Module #
linux:/usr/src/rt2400-1.2.1/Module #
linux:/usr/src/rt2400-1.2.1/Module #
linux:/usr/src/rt2400-1.2.1/Module # cd /usr/src/rt2400-1.2.1/Utility/
linux:/usr/src/rt2400-1.2.1/Utility #
linux:/usr/src/rt2400-1.2.1/Utility #
linux:/usr/src/rt2400-1.2.1/Utility #
linux:/usr/src/rt2400-1.2.1/Utility # ./Configure


----------- Configure Ralink RT2400 Configuration Utility for Compile
-----------


We recommend you use the new version qt-x11-free-3.1.1 or later
Otherwise make could be failed.

QT directory: _[/usr/lib/qt3]: make
QT tree 'make' is incomplete or missing!

Configuration failed

linux:/usr/src/rt2400-1.2.1/Utility #
linux:/usr/src/rt2400-1.2.1/Utility #
linux:/usr/src/rt2400-1.2.1/Utility #


All times are GMT -5. The time now is 07:35 PM.