Suse 9.2 DWL-G510 Wireless
 

I've been trying to figure out getting this card working in Suse 9.2, it uses the Marvell chipset and worked in Mandrake 10 with ndiswrapper and the WinMe drivers. Suse seems to be detecting the card correctly during installation but I can't get it working. I've been away from linux for awhile and need a push in the right direction. Is there something else to configure or should I just ditch this config and go with ndiswrapper? Here's the output of lspci and lspci -n

linux:/home/rob # lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 81)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16)
0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16)
0000:00:07.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50)
0000:00:08.0 Ethernet controller: Marvell Technology Group Ltd. Marvell W8300 802.11 Adapter (rev 07)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS
0000:01:01.0 Display controller: ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS

linux:/home/rob # lspci -n
0000:00:00.0 Class 0600: 1106:0305 (rev 81)
0000:00:01.0 Class 0604: 1106:8305
0000:00:07.0 Class 0601: 1106:0686 (rev 40)
0000:00:07.1 Class 0101: 1106:0571 (rev 06)
0000:00:07.2 Class 0c03: 1106:3038 (rev 16)
0000:00:07.3 Class 0c03: 1106:3038 (rev 16)
0000:00:07.4 Class 0c05: 1106:3057 (rev 40)
0000:00:07.5 Class 0401: 1106:3058 (rev 50)
0000:00:08.0 Class 0200: 11ab:1fa6 (rev 07)
0000:01:00.0 Class 0300: 1002:5046
0000:01:01.0 Class 0380: 1002:5046

Well, I don't have Suse myself, but I do use the same wireless card on Gentoo with ndiswrapper. For any linux distro, you've got to make sure that the ndiswrapper module is running for this card because there is NO linux driver for it at the moment. Let me know if you need further help in setting it up.

Thanks, I got it up and running with ndiswrapper and the xp drivers. Not sure exactly how I did it, but it works now :) When I saw the card was auto-detected, I thought that it was already configured etc, didn't realize I still needed Win drivers for it. My bad :)