LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Wireless Networking (https://www.linuxquestions.org/questions/linux-wireless-networking-41/)
-   -   Slackware-64-current: HP ProBook 450 G8: Wifi not working. (Intel Wireless AC 9560 / Intel Wi-Fi 6 AX201 (rev 20) (https://www.linuxquestions.org/questions/linux-wireless-networking-41/slackware-64-current-hp-probook-450-g8-wifi-not-working-intel-wireless-ac-9560-intel-wi-fi-6-ax201-rev-20-a-4175714886/)

Hisham Syed 07-21-2022 09:11 AM

Slackware-64-current: HP ProBook 450 G8: Wifi not working. (Intel Wireless AC 9560 / Intel Wi-Fi 6 AX201 (rev 20)
 
Hi,

I recently bought a laptop: HP ProBook 450 G8. It came with default installation of Windows 10, under which its wifi connects and works fine. I however, installed Slackware-64 v15-current, and wifi is not recognized either by Network Manager, or by wicd. Following is the output from wireless-info.

{
########## wireless info START ##########

Report from: 21 Jul 2022 06:48 PKT +0500

Booted last: 21 Jul 2022 06:35 PKT +0500

Script from: 25 Jan 2020 03:34 UTC +0000

##### release ###########################

./wireless-info: line 155: lsb_release: command not found

##### kernel ############################

Linux 5.18.12 #1 SMP PREEMPT_DYNAMIC Fri Jul 15 14:25:04 CDT 2022 x86_64 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz GenuineIntel GNU/Linux

Parameters: vga=normal, ro, ro

##### desktop ###########################

/usr/share/xsessions/plasma

##### lspci #############################

00:14.3 Network controller [0280]: Intel Corporation Wi-Fi 6 AX201 [8086:a0f0] (rev 20)
Subsystem: Intel Corporation Wi-Fi 6 AX201 [8086:0034]
Kernel driver in use: iwlwifi

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Subsystem: Hewlett-Packard Company RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [103c:87e1]
Kernel driver in use: r8169

##### lsusb #############################

Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 004: ID 04f3:0c5e Elan Microelectronics Corp. ELAN:ARM-M4
Bus 003 Device 003: ID 046d:c534 Logitech, Inc. Unifying Receiver
Bus 003 Device 002: ID 30c9:0046 Luxvisions Innotech Limited HP HD Camera
Bus 003 Device 005: ID 8087:0aaa Intel Corp. Bluetooth 9460/9560 Jefferson Peak (JfP)
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

##### PCMCIA card info ##################

##### rfkill ############################

0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
1: hci0: Bluetooth
Soft blocked: no
Hard blocked: no

##### secure boot #######################

'mokutil' is not installed (package "mokutil").

##### lsmod #############################

hp_wmi 24576 0
platform_profile 16384 1 hp_wmi
wmi_bmof 16384 0
iwlmvm 380928 0
mac80211 1093632 1 iwlmvm
iwlwifi 348160 1 iwlmvm
iwlmei 36864 2 iwlmvm,iwlwifi
cfg80211 1056768 4 iwlmvm,iwlmei,iwlwifi,mac80211
rfkill 32768 8 hp_wmi,iwlmvm,bluetooth,cfg80211
mei 114688 6 mei_hdcp,iwlmei,mei_pxp,mei_me
wmi 28672 2 hp_wmi,wmi_bmof
sparse_keymap 16384 2 hp_wmi,intel_hid

##### interfaces ########################

##### ifconfig ##########################

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.2.70.155 netmask 255.255.255.0 broadcast 10.2.70.255
inet6 fe80::<IP6 'eth0' [IF1]> prefixlen 64 scopeid 0x20<link>
ether <MAC 'eth0' [IF1]> txqueuelen 1000 (Ethernet)
RX packets 23227 bytes 18241764 (17.3 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 15941 bytes 3548704 (3.3 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 24 bytes 1400 (1.3 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 24 bytes 1400 (1.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

wlan0: flags=4098<BROADCAST,MULTICAST> mtu 1500
ether <MAC 'wlan0' [IF2]> txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

##### iwconfig ##########################

lo no wireless extensions.

eth0 no wireless extensions.

wlan0 IEEE 802.11 ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=-2147483648 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:on


##### route #############################

Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 10.2.70.1 0.0.0.0 UG 1002 0 0 eth0
10.2.70.0 0.0.0.0 255.255.255.0 U 1002 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo

##### resolv.conf #######################

[644 root '/etc/resolv.conf']
domain iba.edu.pk
nameserver 172.17.1.18
nameserver 172.17.1.19
nameserver 172.16.1.13
nameserver 172.16.1.14

##### network managers ##################

Installed:

NetworkManager
Wicd

Running:

None found.

##### NetworkManager info ###############

Error: NetworkManager is not running.

Error: NetworkManager is not running.

##### NetworkManager.state ##############

[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true

##### NetworkManager config #############

[[/etc/NetworkManager/conf.d/00-dhcp-client.conf]]
[main]
dhcp=dhcpcd

[[/etc/NetworkManager/conf.d/00-rc-manager.conf]]
[main]
rc-manager=file

[[/etc/NetworkManager/NetworkManager.conf]]
[main]
plugins=keyfile

##### NetworkManager profiles ###########

##### Netplan config ####################

##### iw reg get ########################

'iw' is not installed (package "iw").

##### iwlist channels ###################

lo no frequency information.

eth0 no frequency information.

wlan0 32 channels in total; available frequencies :
Channel 01 : 2.412 GHz
Channel 02 : 2.417 GHz
Channel 03 : 2.422 GHz
Channel 04 : 2.427 GHz
Channel 05 : 2.432 GHz
Channel 06 : 2.437 GHz
Channel 07 : 2.442 GHz
Channel 08 : 2.447 GHz
Channel 09 : 2.452 GHz
Channel 10 : 2.457 GHz
Channel 11 : 2.462 GHz
Channel 12 : 2.467 GHz
Channel 13 : 2.472 GHz
Channel 36 : 5.18 GHz
Channel 40 : 5.2 GHz
Channel 44 : 5.22 GHz
Channel 48 : 5.24 GHz
Channel 52 : 5.26 GHz
Channel 56 : 5.28 GHz
Channel 60 : 5.3 GHz
Channel 64 : 5.32 GHz
Channel 100 : 5.5 GHz
Channel 104 : 5.52 GHz
Channel 108 : 5.54 GHz
Channel 112 : 5.56 GHz
Channel 116 : 5.58 GHz
Channel 120 : 5.6 GHz
Channel 124 : 5.62 GHz
Channel 128 : 5.64 GHz
Channel 132 : 5.66 GHz
Channel 136 : 5.68 GHz
Channel 140 : 5.7 GHz

##### iwlist scan #######################

lo Interface doesn't support scanning.

eth0 Interface doesn't support scanning.

wlan0 Interface doesn't support scanning : Network is down

##### module infos ######################

[iwlmvm]
filename: /lib/modules/5.18.12/kernel/drivers/net/wireless/intel/iwlwifi/mvm/iwlmvm.ko
license: GPL
description: The new Intel(R) wireless AGN driver for Linux
depends: iwlwifi,mac80211,cfg80211,rfkill,iwlmei
retpoline: Y
intree: Y
name: iwlmvm
vermagic: 5.18.12 SMP preempt mod_unload
parm: init_dbg:set to true to debug an ASSERT in INIT fw (default: false (bool)
parm: power_scheme:power management scheme: 1-active, 2-balanced, 3-low power, default: 2 (int)

[mac80211]
filename: /lib/modules/5.18.12/kernel/net/mac80211/mac80211.ko
license: GPL
description: IEEE 802.11 subsystem
depends: cfg80211
retpoline: Y
intree: Y
name: mac80211
vermagic: 5.18.12 SMP preempt mod_unload
parm: minstrel_vht_only:Use only VHT rates when VHT is supported by sta. (bool)
parm: max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm: max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm: beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm: probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm: ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)

[iwlwifi]
filename: /lib/modules/5.18.12/kernel/drivers/net/wireless/intel/iwlwifi/iwlwifi.ko
license: GPL
description: Intel(R) Wireless WiFi driver for Linux
depends: cfg80211,iwlmei
retpoline: Y
intree: Y
name: iwlwifi
vermagic: 5.18.12 SMP preempt mod_unload
parm: swcrypto:using crypto in software (default 0 [hardware]) (int)
parm: 11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint)
parm: amsdu_size:amsdu size 0: 12K for multi Rx queue devices, 2K for AX210 devices, 4K for other devices 1:4K 2:8K 3:12K (16K buffers) 4: 2K (default 0) (int)
parm: fw_restart:restart firmware in case of error (default true) (bool)
parm: nvm_file:NVM file name (charp)
parm: uapsd_disable:disable U-APSD functionality bitmap 1: BSS 2: P2P Client (default: 3) (uint)
parm: enable_ini:0:disable, 1-15:FW_DBG_PRESET Values, 16:enabled without preset value defined,Debug INI TLV FW debug infrastructure (default: 16)
parm: bt_coex_active:enable wifi/bt co-exist (default: enable) (bool)
parm: led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int)
parm: power_save:enable WiFi power management (default: disable) (bool)
parm: power_level:default power save level (range from 1 - 5, default: 1) (int)
parm: disable_11ac:Disable VHT capabilities (default: false) (bool)
parm: remove_when_gone:Remove dev from PCIe bus if it is deemed inaccessible (default: false) (bool)
parm: disable_11ax:Disable HE capabilities (default: false) (bool)

[iwlmei]
filename: /lib/modules/5.18.12/kernel/drivers/net/wireless/intel/iwlwifi/mei/iwlmei.ko
license: GPL
description: The Intel(R) wireless / CSME firmware interface
depends: mei,cfg80211
retpoline: Y
intree: Y
name: iwlmei
vermagic: 5.18.12 SMP preempt mod_unload

[cfg80211]
filename: /lib/modules/5.18.12/kernel/net/wireless/cfg80211.ko
description: wireless configuration support
license: GPL
depends: rfkill
retpoline: Y
intree: Y
name: cfg80211
vermagic: 5.18.12 SMP preempt mod_unload
parm: bss_entries_limit:limit to number of scan BSS entries (per wiphy, default 1000) (int)
parm: ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm: cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)

##### module parameters #################

[iwlmvm]
init_dbg: N
power_scheme: 2

[mac80211]
beacon_loss_count: 7
ieee80211_default_rc_algo: minstrel_ht
max_nullfunc_tries: 2
max_probe_tries: 5
minstrel_vht_only: Y
probe_wait_ms: 500

grep: /sys/module/iwlwifi/parameters/enable_ini: Operation not permitted
[iwlwifi]
11n_disable: 0
amsdu_size: 0
bt_coex_active: Y
disable_11ac: N
disable_11ax: N
fw_restart: Y
led_mode: 0
nvm_file: (null)
power_level: 0
power_save: N
remove_when_gone: N
swcrypto: 0
uapsd_disable: 3

[cfg80211]
bss_entries_limit: 1000
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00

##### /etc/modules ######################

grep: /etc/modules: No such file or directory

##### modprobe options ##################

##### rc.local ##########################

grep: /etc/rc.local: No such file or directory

##### pm-utils ##########################

find: ‘/etc/pm/*.d’: No such file or directory

##### udev rules ########################

[/etc/udev/rules.d/70-persistent-net.rules]
# PCI device 0x8086:0xa0f0 (iwlwifi)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC 'wlan0' [IF2]>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0"
# PCI device 0x10ec:0x8168 (r8169)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC 'eth0' [IF1]>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

##### dmesg #############################

[ 46.169876] iwlwifi 0000:00:14.3: 0x00000047 | uCode version major
[ 46.169877] iwlwifi 0000:00:14.3: 0x058653F6 | uCode version minor
[ 46.169877] iwlwifi 0000:00:14.3: 0x00000351 | hw version
[ 46.169878] iwlwifi 0000:00:14.3: 0x18489001 | board version
[ 46.169878] iwlwifi 0000:00:14.3: 0x804DFD22 | hcmd
[ 46.169879] iwlwifi 0000:00:14.3: 0x00020000 | isr0
[ 46.169879] iwlwifi 0000:00:14.3: 0x00000000 | isr1
[ 46.169880] iwlwifi 0000:00:14.3: 0x08F00002 | isr2
[ 46.169880] iwlwifi 0000:00:14.3: 0x00C3000C | isr3
[ 46.169881] iwlwifi 0000:00:14.3: 0x00000000 | isr4
[ 46.169881] iwlwifi 0000:00:14.3: 0x00000000 | last cmd Id
[ 46.169882] iwlwifi 0000:00:14.3: 0x004BB74C | wait_event
[ 46.169882] iwlwifi 0000:00:14.3: 0x00000000 | l2p_control
[ 46.169883] iwlwifi 0000:00:14.3: 0x00000000 | l2p_duration
[ 46.169883] iwlwifi 0000:00:14.3: 0x00000000 | l2p_mhvalid
[ 46.169883] iwlwifi 0000:00:14.3: 0x00000000 | l2p_addr_match
[ 46.169884] iwlwifi 0000:00:14.3: 0x00000048 | lmpm_pmg_sel
[ 46.169884] iwlwifi 0000:00:14.3: 0x00000000 | timestamp
[ 46.169885] iwlwifi 0000:00:14.3: 0x00001050 | flow_handler
[ 46.170400] iwlwifi 0000:00:14.3: Start IWL Error Log Dump:
[ 46.170400] iwlwifi 0000:00:14.3: Transport status: 0x0000004B, valid: 7
[ 46.170401] iwlwifi 0000:00:14.3: 0x201002FF | ADVANCED_SYSASSERT
[ 46.170401] iwlwifi 0000:00:14.3: 0x00000000 | umac branchlink1
[ 46.170402] iwlwifi 0000:00:14.3: 0x80453C68 | umac branchlink2
[ 46.170402] iwlwifi 0000:00:14.3: 0xC0081200 | umac interruptlink1
[ 46.170403] iwlwifi 0000:00:14.3: 0x00000000 | umac interruptlink2
[ 46.170403] iwlwifi 0000:00:14.3: 0x00140407 | umac data1
[ 46.170404] iwlwifi 0000:00:14.3: 0xDEADBEEF | umac data2
[ 46.170404] iwlwifi 0000:00:14.3: 0xDEADBEEF | umac data3
[ 46.170405] iwlwifi 0000:00:14.3: 0x00000047 | umac major
[ 46.170405] iwlwifi 0000:00:14.3: 0x058653F6 | umac minor
[ 46.170406] iwlwifi 0000:00:14.3: 0x00028DFA | frame pointer
[ 46.170406] iwlwifi 0000:00:14.3: 0xC0886C24 | stack pointer
[ 46.170407] iwlwifi 0000:00:14.3: 0x00140407 | last host cmd
[ 46.170407] iwlwifi 0000:00:14.3: 0x00000000 | isr status reg
[ 46.170429] iwlwifi 0000:00:14.3: IML/ROM dump:
[ 46.170429] iwlwifi 0000:00:14.3: 0x00000003 | IML/ROM error/state
[ 46.170437] iwlwifi 0000:00:14.3: 0x000059CD | IML/ROM data1
[ 46.170446] iwlwifi 0000:00:14.3: 0x00000080 | IML/ROM WFPM_AUTH_KEY_0
[ 46.170451] iwlwifi 0000:00:14.3: Fseq Registers:
[ 46.170453] iwlwifi 0000:00:14.3: 0x60000000 | FSEQ_ERROR_CODE
[ 46.170456] iwlwifi 0000:00:14.3: 0x80260000 | FSEQ_TOP_INIT_VERSION
[ 46.170458] iwlwifi 0000:00:14.3: 0x00020006 | FSEQ_CNVIO_INIT_VERSION
[ 46.170460] iwlwifi 0000:00:14.3: 0x0000A384 | FSEQ_OTP_VERSION
[ 46.170463] iwlwifi 0000:00:14.3: 0x81BACBAA | FSEQ_TOP_CONTENT_VERSION
[ 46.170465] iwlwifi 0000:00:14.3: 0x4552414E | FSEQ_ALIVE_TOKEN
[ 46.170468] iwlwifi 0000:00:14.3: 0x20000302 | FSEQ_CNVI_ID
[ 46.170470] iwlwifi 0000:00:14.3: 0x01300202 | FSEQ_CNVR_ID
[ 46.170472] iwlwifi 0000:00:14.3: 0x20000302 | CNVI_AUX_MISC_CHIP
[ 46.170479] iwlwifi 0000:00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP
[ 46.170515] iwlwifi 0000:00:14.3: 0x0000485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM
[ 46.170577] iwlwifi 0000:00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR
[ 46.170600] iwlwifi 0000:00:14.3: Starting mac, retry will be triggered anyway
[ 46.170677] iwlwifi 0000:00:14.3: FW error in SYNC CMD UNKNOWN
[ 46.170697] iwl_trans_txq_send_hcmd+0x346/0x350 [iwlwifi]
[ 46.170706] iwlwifi 0000:00:14.3: Hardware error detected. Restarting.
[ 46.170710] iwl_trans_send_cmd+0x62/0xe0 [iwlwifi]
[ 46.170717] iwl_mvm_send_cmd_pdu+0x54/0x90 [iwlmvm]
[ 46.170725] iwl_mvm_ppag_send_cmd+0x54/0xa0 [iwlmvm]
[ 46.170730] iwl_mvm_up+0x653/0x940 [iwlmvm]
[ 46.170734] ? __iwl_err.cold+0x5d/0x62 [iwlwifi]
[ 46.170743] ? iwl_mei_get_ownership+0x42/0x180 [iwlmei]
[ 46.170746] __iwl_mvm_mac_start+0x68/0x1e0 [iwlmvm]
[ 46.170750] iwl_mvm_mac_start+0x6a/0x100 [iwlmvm]
[ 46.170849] iwlwifi 0000:00:14.3: failed to send PER_PLATFORM_ANT_GAIN_CMD (-5)
[ 46.185740] iwlwifi 0000:00:14.3: mac start retry 2

########## wireless info END ############

}

I don't know how to proceed from here to trouble-shoot it. Please help.

Many thanks.


All times are GMT -5. The time now is 08:11 PM.