Hi. I'm using a Dell Axim x5 with a CF wireless card (NL-2511CF)

Also, I have Linux Redhat 9 installed, using a rt2400 chipset Wireless PCI card.

Both devices are installed correctly.

I set both devices to connect to ad-hoc / peer-2-peer networks, and they connect

correctly.

The Linux machine has 2 interfaces. 1 eth0 (cabled network) with IP 192.168.0.50

and also ra0 (wireless card) with IP 192.168.0.51

It is connected to my cable-router (192.168.0.10) and uses it as a gateway, and

DNS server.

My Axim has the IP 192.168.0.60


Even though they are connected (with good signal strength) they cannot ping

eachother (either way).

I would to be able to access the internet on my Axim when connected to the Linux

computer.

Does anybody know what I am talking about? Does anyone know of what I must do?

Also, does anybody know what I should set as the gateway and DNS on the Axim?

Any help would be appreciated.


James.

Just make sure that both interfaces (eth0 and ra0) are on different networks (have just one of the interfaces on the same network (192.168.0)) and also each interface must have a gateway ip address defined if you want to use it.

The routing in linux/unix gets confused if more than one interface is connected to the same network.

Hello,

I've installed a ralink rt2400 on a linux redhat9.0, all operations are god.
When I attribute an IP to the card and the router it's ok but it doesn't match.
When i boot the machine it says: ra0 ---------> ignored
can you help me please?