Problem with NetworkManager

aspartat · 12-16-2006, 09:39 AM

Hi there,

Im trying now for several days to get connected to my wlan-networks over NetworkManager and knetworkmanager.
I have installed dhclient, dhcdbd, wpa_supplicant NetworkManager and knetworkmanager.
Here is the output of the console while trying to connect to a wep-protected Network. Maybe someone of you can give me a hint how to get this thing working.

Quote:

root@thinkpadomat:/home/simon# NetworkManager --no-daemon
NetworkManager: <information> starting...
NetworkManager: <information> eth0: Device is fully-supported using driver 'e1000'.
NetworkManager: <information> nm_device_init(): waiting for device's worker thread to start
NetworkManager: <information> nm_device_init(): device's worker thread started, continuing.
NetworkManager: <information> Now managing wired Ethernet (802.3) device 'eth0'.
NetworkManager: <information> Deactivating device eth0.
NetworkManager: <information> eth1: Device is fully-supported using driver 'ipw2200'.
NetworkManager: <information> nm_device_init(): waiting for device's worker thread to start
NetworkManager: <information> nm_device_init(): device's worker thread started, continuing.
NetworkManager: <information> Now managing wireless (802.11) device 'eth1'.
NetworkManager: <information> Deactivating device eth1.
NetworkManager: <information> Updating allowed wireless network lists.
NetworkManager: <WARNING> nm_dbus_get_networks_cb (): error received: org.freedesktop.NetworkManagerInfo.NoNetworks - org.freedesktop.NetworkManagerInfo.NoNetworks.
NetworkManager: <debug info> [1166283311.538454] nm_device_802_11_wireless_get_activation_ap (): Forcing AP 'linksys'
NetworkManager: <information> User Switch: /org/freedesktop/NetworkManager/Devices/eth1 / linksys
NetworkManager: <information> Deactivating device eth1.
NetworkManager: <information> Device eth1 activation scheduled...
NetworkManager: <information> Activation (eth1) started...
NetworkManager: <information> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled...
NetworkManager: <information> Activation (eth1) Stage 1 of 5 (Device Prepare) started...
NetworkManager: <information> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled...
NetworkManager: <information> Activation (eth1) Stage 1 of 5 (Device Prepare) complete.
NetworkManager: <information> Activation (eth1) Stage 2 of 5 (Device Configure) starting...
NetworkManager: <information> Activation (eth1/wireless): access point 'linksys' is encrypted, but NO valid key exists. New key needed.
NetworkManager: <information> Activation (eth1) New wireless user key requested for network 'linksys'.
NetworkManager: <information> Activation (eth1) Stage 2 of 5 (Device Configure) complete.
NetworkManager: <information> Activation (eth1) New wireless user key for network 'linksys' received.
NetworkManager: <information> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled...
NetworkManager: <information> Activation (eth1) Stage 1 of 5 (Device Prepare) started...
NetworkManager: <information> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled...
NetworkManager: <information> Activation (eth1) Stage 1 of 5 (Device Prepare) complete.
NetworkManager: <information> Activation (eth1) Stage 2 of 5 (Device Configure) starting...
NetworkManager: <information> Activation (eth1/wireless): access point 'linksys' is encrypted, and a key exists. No new key needed.
NetworkManager: <information> SUP: sending command 'INTERFACE_ADD eth1 wext /var/run/wpa_supplicant '
NetworkManager: <information> SUP: response was 'OK'
NetworkManager: <information> SUP: sending command 'AP_SCAN 1'
NetworkManager: <information> SUP: response was 'OK'
NetworkManager: <information> SUP: sending command 'ADD_NETWORK'
NetworkManager: <information> SUP: response was '0'
NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 ssid 6c696e6b737973'
NetworkManager: <information> SUP: response was 'OK'
NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 key_mgmt NONE'
NetworkManager: <information> SUP: response was 'OK'
NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 wep_key0 <key>'
NetworkManager: <information> SUP: response was 'OK'
NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 wep_tx_keyidx 0'
NetworkManager: <information> SUP: response was 'OK'
NetworkManager: <information> SUP: sending command 'ENABLE_NETWORK 0'
NetworkManager: <information> SUP: response was 'OK'
NetworkManager: <information> Activation (eth1) Stage 2 of 5 (Device Configure) complete.
NetworkManager: <information> wpa_supplicant(5878): Global control interface '/var/run/wpa_supplicant-global'
NetworkManager: <information> wpa_supplicant(5878): RX global ctrl_iface - hexdump_ascii(len=49):
NetworkManager: <information> wpa_supplicant(5878): 49 4e 54 45 52 46 41 43 45 5f 41 44 44 20 65 74 INTERFACE_ADD et
NetworkManager: <information> wpa_supplicant(5878): 68 31 09 09 77 65 78 74 09 2f 76 61 72 2f 72 75 h1__wext_/var/ru
NetworkManager: <information> wpa_supplicant(5878): 6e 2f 77 70 61 5f 73 75 70 70 6c 69 63 61 6e 74 n/wpa_supplicant
NetworkManager: <information> wpa_supplicant(5878): 09 _
NetworkManager: <information> wpa_supplicant(5878): CTRL_IFACE GLOBAL INTERFACE_ADD 'eth1 wext /var/run/wpa_supplicant '
NetworkManager: <information> wpa_supplicant(5878): Initializing interface 'eth1' conf 'N/A' driver 'wext' ctrl_interface '/var/run/wpa_supplicant' bridge 'N/A'
NetworkManager: <information> wpa_supplicant(5878): Initializing interface (2) 'eth1'
NetworkManager: <information> wpa_supplicant(5878): EAPOL: SUPP_PAE entering state DISCONNECTED
NetworkManager: <information> wpa_supplicant(5878): EAPOL: KEY_RX entering state NO_KEY_RECEIVE
NetworkManager: <information> wpa_supplicant(5878): EAPOL: SUPP_BE entering state INITIALIZE
NetworkManager: <information> wpa_supplicant(5878): EAP: EAP entering state DISABLED
NetworkManager: <information> wpa_supplicant(5878): EAPOL: External notification - portEnabled=0
NetworkManager: <information> wpa_supplicant(5878): EAPOL: External notification - portValid=0
NetworkManager: <information> wpa_supplicant(5878): SIOCGIWRANGE: WE(compiled)=21 WE(source)=18 enc_capa=0xf
NetworkManager: <information> wpa_supplicant(5878): capabilities: key_mgmt 0xf enc 0xf
NetworkManager: <information> wpa_supplicant(5878): WEXT: Operstate: linkmode=1, operstate=5
NetworkManager: <information> wpa_supplicant(5878): a
NetworkManager: <information> wpa_supplicant(5878): wpa_driver_wext_set_wpa
NetworkManager: <information> wpa_supplicant(5878): wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
NetworkManager: <information> wpa_supplicant(5878): wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
NetworkManager: <information> wpa_supplicant(5878): wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
NetworkManager: <information> wpa_supplicant(5878): wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
NetworkManager: <information> wpa_supplicant(5878): wpa_driver_wext_set_countermeasures
NetworkManager: <information> wpa_supplicant(5878): wpa_driver_wext_set_drop_unencrypted
NetworkManager: <information> wpa_supplicant(5878): Setting scan request: 0 sec 100000 usec
NetworkManager: <information> wpa_supplicant(5878): Added interface eth1
NetworkManager: <information> wpa_supplicant(5878): RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
NetworkManager: <information> wpa_supplicant(5878): Wireless event: cmd=0x8b06 len=8
NetworkManager: <information> wpa_supplicant(5878): RX ctrl_iface - hexdump_ascii(len=9):
NetworkManager: <information> wpa_supplicant(5878): 41 50 5f 53 43 41 4e 20 31 AP_SCAN 1
NetworkManager: <information> wpa_supplicant(5878): RX ctrl_iface - hexdump_ascii(len=11):
NetworkManager: <information> wpa_supplicant(5878): 41 44 44 5f 4e 45 54 57 4f 52 4b ADD_NETWORK
NetworkManager: <information> wpa_supplicant(5878): CTRL_IFACE: ADD_NETWORK
NetworkManager: <information> wpa_supplicant(5878): RX ctrl_iface - hexdump_ascii(len=33): [REMOVED]
NetworkManager: <information> wpa_supplicant(5878): CTRL_IFACE: SET_NETWORK id=0 name='ssid'
NetworkManager: <information> wpa_supplicant(5878): CTRL_IFACE: value - hexdump_ascii(len=14): [REMOVED]
NetworkManager: <information> wpa_supplicant(5878): ssid - hexdump_ascii(len=7):
NetworkManager: <information> wpa_supplicant(5878): 6c 69 6e 6b 73 79 73 linksys
NetworkManager: <information> wpa_supplicant(5878): e - hexdump_ascii(len=27): [REMOVED]
NetworkManager: <information> wpa_supplicant(5878): CTRL_IFACE: SET_NETWORK id=0 name='key_mgmt'
NetworkManager: <information> wpa_supplicant(5878): CTRL_IFACE: value - hexdump_ascii(len=4): [REMOVED]
NetworkManager: <information> wpa_supplicant(5878): key_mgmt: 0x4
NetworkManager: <information> wpa_supplicant(5878): RX ctrl_iface - hexdump_ascii(len=49): [REMOVED]
NetworkManager: <information> wpa_supplicant(5878): CTRL_IFACE: SET_NETWORK id=0 name='wep_key0'
NetworkManager: <information> wpa_supplicant(5878): CTRL_IFACE: value - hexdump_ascii(len=26): [REMOVED]
NetworkManager: <information> wpa_supplicant(5878): wep_key0 - hexdump(len=13): [REMOVED]
NetworkManager: <information> wpa_supplicant(5878): RX ctrl_iface - hexdump_ascii(len=29): [REMOVED]
NetworkManager: <information> wpa_supplicant(5878): CTRL_IFACE: SET_NETWORK id=0 name='wep_tx_keyidx'
NetworkManager: <information> wpa_supplicant(5878): CTRL_IFACE: value - hexdump_ascii(len=1): [REMOVED]
NetworkManager: <information> wpa_supplicant(5878): wep_tx_keyidx=0 (0x0)
NetworkManager: <information> wpa_supplicant(5878): RX ctrl_iface - hexdump_ascii(len=16):
NetworkManager: <information> wpa_supplicant(5878): 45 4e 41 42 4c 45 5f 4e 45 54 57 4f 52 4b 20 30 ENABLE_NETWORK 0
NetworkManager: <information> wpa_supplicant(5878): CTRL_IFACE: ENABLE_NETWORK id=0
NetworkManager: <information> wpa_supplicant(5878): Setting scan request: 0 sec 0 usec
NetworkManager: <information> wpa_supplicant(5878): State: DISCONNECTED -> SCANNING
NetworkManager: <information> wpa_supplicant(5878): Starting AP scan (broadcast SSID)
NetworkManager: <information> wpa_supplicant(5878): Trying to get current scan results first without requesting a new scan to speed up initial association
NetworkManager: <information> wpa_supplicant(5878): Received 444 bytes of scan results (2 BSSes)
NetworkManager: <information> wpa_supplicant(5878): Scan results: 2
NetworkManager: <information> wpa_supplicant(5878): Selecting BSS from priority group 0
NetworkManager: <information> wpa_supplicant(5878): 0: 00:01:e3:41:73:59 ssid='sodaro1' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
NetworkManager: <information> wpa_supplicant(5878): skip - no WPA/RSN IE
NetworkManager: <information> wpa_supplicant(5878): 1: 00:16:b6:a9:9f:f0 ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
NetworkManager: <information> wpa_supplicant(5878): skip - no WPA/RSN IE
NetworkManager: <information> wpa_supplicant(5878): selected non-WPA AP 00:16:b6:a9:9f:f0 ssid='linksys'
NetworkManager: <information> wpa_supplicant(5878): Trying to associate with 00:16:b6:a9:9f:f0 (SSID='linksys' freq=0 MHz)
NetworkManager: <information> wpa_supplicant(5878): Cancelling scan request
NetworkManager: <information> wpa_supplicant(5878): WPA: clearing own WPA/RSN IE
NetworkManager: <information> wpa_supplicant(5878): Automatic auth_alg selection: 0x1
NetworkManager: <information> wpa_supplicant(5878): WPA: clearing AP WPA IE
NetworkManager: <information> wpa_supplicant(5878): WPA: clearing AP RSN IE
NetworkManager: <information> wpa_supplicant(5878): WPA: clearing own WPA/RSN IE
NetworkManager: <information> wpa_supplicant(5878): No keys have been configured - skip key clearing
NetworkManager: <information> wpa_supplicant(5878): wpa_driver_wext_set_key: alg=1 key_idx=0 set_tx=1 seq_len=0 key_len=13
NetworkManager: <information> wpa_supplicant(5878): wpa_driver_wext_set_drop_unencrypted
NetworkManager: <information> wpa_supplicant(5878): State: SCANNING -> ASSOCIATING
NetworkManager: <information> wpa_supplicant(5878): wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
NetworkManager: <information> wpa_supplicant(5878): WEXT: Operstate: linkmode=-1, operstate=5
NetworkManager: <information> wpa_supplicant(5878): wpa_driver_wext_associate
NetworkManager: <information> wpa_supplicant(5878): Setting authentication timeout: 10 sec 0 usec
NetworkManager: <information> wpa_supplicant(5878): EAPOL: External notification - portControl=ForceAuthorized
NetworkManager: <information> wpa_supplicant(5878): RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
NetworkManager: <information> wpa_supplicant(5878): Wireless event: cmd=0x8b06 len=8
NetworkManager: <information> Activation (eth1/wireless) Stage 2 of 5 (Device Configure) successful. Connected to access point 'linksys'.
NetworkManager: <information> Activation (eth1) Stage 3 of 5 (IP Configure Start) scheduled.
NetworkManager: <information> Activation (eth1) Stage 3 of 5 (IP Configure Start) started...
NetworkManager: <information> Activation (eth1) Beginning DHCP transaction.
NetworkManager: <information> Activation (eth1) Stage 3 of 5 (IP Configure Start) complete.
NetworkManager: <information> wpa_supplicant(5878): 2 2f 77 70 61 5f 63 74 72 6c 5f 35 37 31 31 2d 31 00
NetworkManager: <information> wpa_supplicant(5878): RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
NetworkManager: <information> wpa_supplicant(5878): Wireless event: cmd=0x8b1a len=15
NetworkManager: <information> wpa_supplicant(5878): RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
NetworkManager: <information> wpa_supplicant(5878): Wireless event: cmd=0x8b19 len=8
NetworkManager: <information> wpa_supplicant(5878): Received 442 bytes of scan results (2 BSSes)
NetworkManager: <information> wpa_supplicant(5878): Scan results: 2
NetworkManager: <information> wpa_supplicant(5878): Selecting BSS from priority group 0
NetworkManager: <information> wpa_supplicant(5878): 0: 00:01:e3:41:73:59 ssid='sodaro1' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
NetworkManager: <information> wpa_supplicant(5878): skip - no WPA/RSN IE
NetworkManager: <information> wpa_supplicant(5878): 1: 00:16:b6:a9:9f:f0 ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
NetworkManager: <information> DHCP daemon state is now 12 (successfully started) for interface eth1
NetworkManager: <information> wpa_supplicant(5878): skip - no WPA/RSN IE
NetworkManager: <information> wpa_supplicant(5878): selected non-WPA AP 00:16:b6:a9:9f:f0 ssid='linksys'
NetworkManager: <information> wpa_supplicant(5878): Already associated with the selected AP.
NetworkManager: <information> wpa_supplicant(5878): RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
NetworkManager: <information> wpa_supplicant(5878): Wireless event: cmd=0x8b15 len=20
NetworkManager: <information> wpa_supplicant(5878): Wireless event: new AP: 00:16:b6:a9:9f:f0
NetworkManager: <information> wpa_supplicant(5878): State: ASSOCIATING -> ASSOCIATED
NetworkManager: <information> wpa_supplicant(5878): wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
NetworkManager: <information> wpa_supplicant(5878): WEXT: Operstate: linkmode=-1, operstate=5
NetworkManager: <information> wpa_supplicant(5878): Associated to a new BSS: BSSID=00:16:b6:a9:9f:f0
NetworkManager: <information> wpa_supplicant(5878): Associated with 00:16:b6:a9:9f:f0
NetworkManager: <information> wpa_supplicant(5878): 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61 5f 63 74 72 6c 5f 35 37 31 31 2d 31 00
NetworkManager: <information> wpa_supplicant(5878): WPA: Association event - clear replay counter
NetworkManager: <information> wpa_supplicant(5878): EAPOL: External notification - portEnabled=0
NetworkManager: <information> wpa_supplicant(5878): EAPOL: External notification - portValid=0
NetworkManager: <information> wpa_supplicant(5878): EAPOL: External notification - portEnabled=1
NetworkManager: <information> wpa_supplicant(5878): EAPOL: SUPP_PAE entering state S_FORCE_AUTH
NetworkManager: <information> wpa_supplicant(5878): EAPOL: SUPP_BE entering state IDLE
NetworkManager: <information> wpa_supplicant(5878): Cancelling authentication timeout
NetworkManager: <information> wpa_supplicant(5878): State: ASSOCIATED -> COMPLETED
NetworkManager: <information> wpa_supplicant(5878): CTRL-EVENT-CONNECTED - Connection to 00:16:b6:a9:9f:f0 completed (auth) [id=0 id_str=]
NetworkManager: <information> wpa_supplicant(5878): CTRL_IFACE monitor send - hexdump(len=40): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61 5f 63 74 72 6c 5f 35 37 31 31 2d 31 00
NetworkManager: <information> wpa_supplicant(5878): wpa_driver_wext_set_operstate: operstate 0->1 (UP)
NetworkManager: <information> wpa_supplicant(5878): WEXT: Operstate: linkmode=-1, operstate=6
NetworkManager: <information> wpa_supplicant(5878): Cancelling scan request
NetworkManager: <information> wpa_supplicant(5878): RTM_NEWLINK: operstate=1 ifi_flags=0x11003 ([UP][LOWER_UP])
NetworkManager: <information> wpa_supplicant(5878): WEXT: Operstate: linkmode=-1, operstate=6
NetworkManager: <information> wpa_supplicant(5878): RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
NetworkManager: <information> wpa_supplicant(5878): RTM_NEWLINK: operstate=1 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
NetworkManager: <information> DHCP daemon state is now 14 (normal exit) for interface eth1

Thanks in Advance
Thorsten

rje_NC · 12-16-2006, 07:54 PM

You need to give us a clue what distro you are using, and some basic information about your system and what type of wireless card you have. With this, someone might have had similar experiences with his hardware and might be able to offer some info.

Bob

aspartat · 12-17-2006, 07:49 AM

Ok,
I use slackware-11.0, linux-2.6.19.1 and a wlan-card which uses the ipw-2200 driver from the kernel.
I want it to be connected with a linksy-wrt54gs router.

Thorsten