Look, thanks for your answer, i want to use my modem by USB to connect to the Net, i will show my /proc/bus/usb/devices:
Code:
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.12-586-vs2.0 uhci_hcd
S: Product=VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
S: SerialNumber=0000:00:10.1
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0572 ProdID=cb01 Rev= 1.00
S: Manufacturer=-
S: Product=USB NET CARD
S: SerialNumber=00000386
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 80mA
I: If#= 0 Alt= 0 #EPs= 7 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=4ms
E: Ad=01(O) Atr=03(Int.) MxPS= 64 Ivl=4ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 8 Ivl=4ms
That's the important part, the Bus=03. Look this:
Code:
P: Vendor=0572 ProdID=cb01 Rev= 1.00
S: Manufacturer=-
S: Product=USB NET CARD
S: SerialNumber=00000386
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 80mA
I: If#= 0 Alt= 0 #EPs= 7 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
In driver should says 'ndiswrapper', but i always get an error, this time was different, i change my kernel from 2.6.8 to 2.6.12 (Precompiled one)
Code:
ghostbar:/home/ghostbar/docs/driversmodem# dmesg |grep ndiswrapper
ndiswrapper version 1.1 loaded (preempt=yes,smp=no)
usbcore: registered new driver ndiswrapper
usbcore: deregistering driver ndiswrapper
ndiswrapper version 1.1 loaded (preempt=yes,smp=no)
usbcore: registered new driver ndiswrapper
ndiswrapper (import:238): unknown symbol: NTOSKRNL.EXE:KeInitializeTimerEx
ndiswrapper (import:238): unknown symbol: NTOSKRNL.EXE:KeReadStateTimer
ndiswrapper (import:238): unknown symbol: NTOSKRNL.EXE:KeInsertQueueDpc
ndiswrapper (import:238): unknown symbol: NTOSKRNL.EXE:KeRemoveQueueDpc
ndiswrapper (import:238): unknown symbol: NTOSKRNL.EXE:IoInvalidateDeviceRelations
ndiswrapper (import:238): unknown symbol: NTOSKRNL.EXE:IoInvalidateDeviceState
ndiswrapper (import:238): unknown symbol: NTOSKRNL.EXE:ZwCreateFile
ndiswrapper (import:238): unknown symbol: NTOSKRNL.EXE:ZwOpenKey
ndiswrapper (import:238): unknown symbol: NTOSKRNL.EXE:PoSetPowerState
ndiswrapper (import:238): unknown symbol: NTOSKRNL.EXE:PoRequestPowerIrp
ndiswrapper (import:238): unknown symbol: NTOSKRNL.EXE:IoOpenDeviceRegistryKey
ndiswrapper (import:238): unknown symbol: NTOSKRNL.EXE:IoSetDeviceInterfaceState
ndiswrapper (import:238): unknown symbol: NTOSKRNL.EXE:ZwQueryValueKey
ndiswrapper (import:238): unknown symbol: NTOSKRNL.EXE:ZwSetValueKey
ndiswrapper (import:238): unknown symbol: NTOSKRNL.EXE:ZwQueryInformationFile
ndiswrapper (import:238): unknown symbol: NTOSKRNL.EXE:ExQueueWorkItem
ndiswrapper (import:238): unknown symbol: NTOSKRNL.EXE:wcslen
ndiswrapper (import:238): unknown symbol: NTOSKRNL.EXE:IoAttachDeviceToDeviceStack
ndiswrapper (import:238): unknown symbol: NTOSKRNL.EXE:IoRegisterDeviceInterface
ndiswrapper (import:238): unknown symbol: NTOSKRNL.EXE:RtlGUIDFromString
ndiswrapper (import:238): unknown symbol: NTOSKRNL.EXE:IoWriteErrorLogEntry
ndiswrapper (import:238): unknown symbol: NTOSKRNL.EXE:IoAllocateErrorLogEntry
ndiswrapper (import:238): unknown symbol: NTOSKRNL.EXE:KeQuerySystemTime
ndiswrapper (import:238): unknown symbol: NTOSKRNL.EXE:IoDetachDevice
ndiswrapper (import:238): unknown symbol: NTOSKRNL.EXE:ZwReadFile
ndiswrapper (import:238): unknown symbol: NTOSKRNL.EXE:ZwWriteFile
ndiswrapper (import:238): unknown symbol: NTOSKRNL.EXE:IoGetAttachedDeviceReference
ndiswrapper (load_sys_files:456): unable to prepare driver 'cxttrusb'
ndiswrapper (ndiswrapper_load_driver:92): loadndiswrapper failed (11); check system log for messages from 'loadndisdriver'
usbcore: deregistering driver ndiswrapper
And it says the same thing 4 or 5 times more... BUT now doesn't show the udev problem... Any Idea?...
EDIT:
Oh, and checking the /var/log/syslog i found this:
Code:
Sep 15 12:44:16 localhost loadndisdriver: loadndisdriver: load_driver(317): file cnxdslwz.dll is ignored
Sep 15 12:44:16 localhost loadndisdriver: loadndisdriver: load_driver(317): file cnxunist.exe is ignored
Sep 15 12:44:16 localhost kernel: ndiswrapper (ndiswrapper_load_driver:92): loadndiswrapper failed (11); check system log for messages from 'loadndisdriver'
And i have that things, should i install that with 'ndiswrapper -i file'? or put that in ndiswrapper directory?... or something?...
