LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Wireless Networking (https://www.linuxquestions.org/questions/linux-wireless-networking-41/)
-   -   Installing internal 3G Card (https://www.linuxquestions.org/questions/linux-wireless-networking-41/installing-internal-3g-card-616384/)

CrownAmbassador 01-26-2008 04:24 AM

Installing internal 3G Card
 
I have been using Ubuntu on my old Dell Inspiron 5150 laptop for a few days and have been connecting via a crossover cable to my Vista laptop for a internet connection. Now I installed Ubuntu on my Vista laptop (dual boot) too(Dell Latitude D630). The internet connection I've been using is through my internal Vodacom 3G card. So, now I'm trying to get my internal 3G card installed. Anybody have a idea on how to do this?

Thanks.

comprookie2000 01-26-2008 11:17 AM

I use a sierra 875U in the US. This may get you started. I think you will be able to get it to work.
http://www.kuix.de/umts/vodafone/
http://mybroadband.co.za/vb/archive/...p/t-19571.html
http://www.linux.org.za/Lists-Archiv.../msg00017.html

CrownAmbassador 01-27-2008 03:26 AM

Thanks Comprookie,

But it seems like those links only addresses external 3G cards where as mine is internal.

comprookie2000 01-27-2008 04:43 AM

What does it show up as with lspci?

CrownAmbassador 01-27-2008 05:03 AM

Quote:

Originally Posted by comprookie2000 (Post 3036429)
What does it show up as with lspci?

Well, this is what I get when I run lspci with the 3G card switch enabled:

Code:

00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
03:01.0 CardBus bridge: O2 Micro, Inc. Cardbus bridge (rev 21)
03:01.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02)
09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express (rev 02)
0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)

The last one seems about right?

CrownAmbassador 01-30-2008 12:52 PM

Anyone have a idea here?

comprookie2000 01-30-2008 05:17 PM

The last one is your wireless.
try with it in.
modprobe usbserial
lsusb
what does it say?

this may help ask them;
https://forge.vodafonebetavine.net/p...dafonemobilec/

CrownAmbassador 01-31-2008 12:39 AM

Code:

crownambassador@Vista:~$ modprobe usbserial
crownambassador@Vista:~$ lsusb
Bus 001 Device 001: ID 0000:0000 
Bus 007 Device 001: ID 0000:0000 
Bus 005 Device 007: ID 12d1:1003 
Bus 005 Device 001: ID 0000:0000 
Bus 004 Device 003: ID 045e:007d Microsoft Corp. Notebook Optical Mouse
Bus 004 Device 001: ID 0000:0000 
Bus 002 Device 002: ID 413c:8140 Dell Computer Corp.
Bus 002 Device 001: ID 0000:0000 
Bus 006 Device 002: ID 0b97:7761 O2 Micro, Inc.
Bus 006 Device 003: ID 0b97:7772 O2 Micro, Inc.
Bus 006 Device 001: ID 0000:0000 
Bus 003 Device 002: ID 413c:8137 Dell Computer Corp.
Bus 003 Device 001: ID 0000:0000

If a driver doesn't exist, is it posible to make one?

farslayer 01-31-2008 10:51 AM

Sure if you want to redo all the work that's already been done....

https://forge.vodafonebetavine.net/p...dafonemobilec/ - I see comprookie2000 posted the link the the driver yesterday..

http://www.kuix.de/umts/vodafone/

http://www.tlug.org.za/wiki/index.php/Vodacom_3G

http://www.tectonic.co.za/wordpress/?p=1596

CrownAmbassador 01-31-2008 01:39 PM

Thanks farslayer.

Those websites deals with external cards, but I have posted on the Vodafonebetavine site.

Hopefully this will be sorted out soon as I really want to use the internal card. Its like nobody ever attempted to do this. I feel like crying! Lol! No, but seriously. Its kinda frustrating.

farslayer 01-31-2008 02:13 PM

internal, external, PCMCIA, PCI, USB, who cares ? if the chip is the same, the driver should be too.

I use the same intel driver for an embedded NIC as I do for a PCI NIC.. Sorry I doubt anyone has a how-to Step by step for your exact situation.. you need to take the available info and adjust it to your needs. it's not like they created an entirely new interface bus just for your embedded card. That card still has to connect to one of the existing data busses in the PC.

CrownAmbassador 01-31-2008 02:23 PM

As far as I understood some websites, I'm supposed to see where it gets "mounted" when i flip the switch, but this is the output of /var/log/messages:

Code:

Jan 31 21:21:13 Vista kernel: [  224.960000] atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
Jan 31 21:21:13 Vista kernel: [  224.960000] atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.
Jan 31 21:21:13 Vista kernel: [  225.348000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
Jan 31 21:21:14 Vista kernel: [  225.564000] usb 3-2: new full speed USB device using uhci_hcd and address 2
Jan 31 21:21:14 Vista kernel: [  225.568000] ADDRCONF(NETDEV_UP): eth1: link is not ready
Jan 31 21:21:14 Vista kernel: [  225.752000] usb 3-2: configuration #1 chosen from 1 choice
Jan 31 21:21:14 Vista kernel: [  225.876000] Bluetooth: HCI USB driver ver 2.9
Jan 31 21:21:14 Vista kernel: [  225.880000] usbcore: registered new interface driver hci_usb

I don't know if I'm missing something here.

comprookie2000 01-31-2008 02:55 PM

Looks like it;
ADDRCONF(NETDEV_UP): eth1: link is not ready

CrownAmbassador 01-31-2008 04:06 PM

Isn't that just the connection name? Not the device location?

CrownAmbassador 01-31-2008 04:09 PM

By the way... When I start the Vodafone app it picks the USB modem up automaticly. Do you think there might be a way of telling it where the internal card is once I figure out where it is mounted?

comprookie2000 02-01-2008 08:40 PM

It most likely will show up as (/dev/ttyUSB0
I think you need to get it out of your head that it is a pci card. Most of them show up as usb devices. I know it is confusing and I don't know why but that is the way it is, I think.

farslayer 02-01-2008 10:46 PM

That is true.. the EVDO card I have from Verizon is a PCMCIA card, but it is viewed as a USB device.. I really, really, don't understand why they made it like that..

CrownAmbassador 02-02-2008 07:16 AM

Thank guys. I don't think my head is working right coz i don't know what to do here.

Does this have anything to do with it?:

"Jan 31 21:21:14 Vista kernel: [ 225.880000] usbcore: registered new interface driver hci_usb"

comprookie2000 02-02-2008 10:31 AM

Next to the driver plus alot of reading;
https://forge.vodafonebetavine.net/p...dafonemobilec/

CrownAmbassador 02-02-2008 10:42 AM

Thanks Comprookie. I'm already using this app with my external USB modem but can't get a option to search for the interneal device. And I still don't know where it gets mounted. It might not be USB0 as I am using other USB devices. I also can't find a editable file for the app.

CrownAmbassador 02-05-2008 02:21 PM

Sorry if I'm being blond, but any ideas?

CrownAmbassador 02-06-2008 09:18 AM

I'm terribly disappointed that nobody can help me any further here. Now I have a great laptop with a embedded 3G card but I can't use it.

Emerson 02-06-2008 09:59 AM

12d1:1003 E220 HSDPA Modem, Huawei Technologies Co., Ltd.

OK, looking at your lsusb output, is this your internal modem? Or you had an external modem connected when you ran lsusb?

farslayer 02-06-2008 01:06 PM

Googling "E220 HSDPA modem Linux" returns lots of results with HOW-To's..

http://www.mohdshakir.net/2007/12/05...gibbon-kubuntu
http://ske.sourceforge.net/html/proj...uawei_tre.html
http://gentoo-wiki.com/HARDWARE_HUAW...SDPA_USB_MODEM
http://ubuntuforums.org/showthread.php?t=262867
http://oozie.fm.interia.pl/pro/huawei-e220/
http://www.inorp.com/blog/2007/03/13...e-tre-network/
http://wwwu.uni-klu.ac.at/agebhard/HuaweiE220/
http://linux.frankenberger.at/Huawei_E220.html

tnrooster 02-06-2008 08:00 PM

Do 3g cards dial out like evdo? When I set up my EVDO I had to pick the tty0 device out in the modem list. Assign a login, number to call and whatnot.

CrownAmbassador 02-10-2008 04:49 AM

Quote:

Originally Posted by Emerson (Post 3047979)
12d1:1003 E220 HSDPA Modem, Huawei Technologies Co., Ltd.

OK, looking at your lsusb output, is this your internal modem? Or you had an external modem connected when you ran lsusb?

Hi Emerson. Yes, the E220 modem is my external modem I'm using as my embedded one is not working yet.

tnrooster. The vodafone app I'm using with my USB modem works like that. Putting username and password and also the apn and connecting.

I was thinking if the Vodafone app can be told where the internal card is it will work, but I don't know where the internel one is mounted and also not where to tell the Vodafone app where to look.

Emerson 02-10-2008 09:31 AM

I don't think we'll get anywhere without identifying the device. I assume your 3G card was turned on when you ran lspci? Did you say you dual-boot? Please look into Windows Device Manager (I hope Vista has such a thing) and try to find it there. Notice how it is connected, what's its name, ID, etc. 413c:8137 is not in Linux usbid database, maybe this is the internal modem?

Emerson 02-10-2008 10:25 AM

What version of Linux kernel you are running? Support for Dell Wireless 5520 was added to 2.6.23-rc7.

http://tree.celinuxforum.org/gitstat...887675c31ae78f

Edit: Forget my previous post, 413c:8137 is Dell Wireless 5520

CrownAmbassador 02-10-2008 12:13 PM

Ah! Seems like we're getting somewhere now. I'm running 2.6.22. Is there a repository I can add to update. I've downloaded the kernel manually, but can't figure out how to install it.

Emerson 02-10-2008 12:39 PM

Before you start all this fun with new kernel we could try to tell the current kernel what this device is for:

sudo modprobe usbserial vendor=413c product=8137

This should create at least one /dev/ttyUSBx device, possibly two or three. Do ls /dev/ttyUSB* before and after modprobe command to see what happened.

Emerson 02-10-2008 01:37 PM

Whoops

sudo modprobe usbserial vendor=0x413c product=0x8137

This would be the correct command, forgot those values are hexadecimal.

CrownAmbassador 02-10-2008 02:03 PM

Quote:

Originally Posted by Emerson (Post 3052550)
Whoops

sudo modprobe usbserial vendor=0x413c product=0x8137

This would be the correct command, forgot those values are hexadecimal.

I'm getting ready to install the new kernel. Do you know if the card support needs to be enabled seperately? I can't find a option to do that.

Emerson 02-10-2008 02:21 PM

No, it's in there.

CrownAmbassador 02-10-2008 02:25 PM

Quote:

Originally Posted by Emerson (Post 3052589)
No, it's in there.

Great, thanks! Is there a website with info on kernels?

CrownAmbassador 02-10-2008 03:42 PM

The website I followed on how to install the kernel uses Lilo, but I use grub. As it didn't automaticly configure grub I had to do it myself.

The kernel didn't install a initrid file and I searched around about this and noticed that I only need it if the kernel only depends on modules or something like that. So what I did is the following:

Code:

title          Ubuntu 7.10, kernel 2.6.22-14-generic (recovery mode)
root            (hd0,4)
kernel          /boot/vmlinuz-2.6.22-14-generic root=UUID=97f69d92-ee47-41a7-92b6-c37e3a942561 ro single
initrd          /boot/initrd.img-2.6.22-14-generic

title          Ubuntu 7.10, memtest86+
root            (hd0,4)
kernel          /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title          Other operating systems:
root

title          Ubuntu 7.10, kernel 2.6.24.1
root            (hd0,4)
kernel          /boot/vmlinuz-2.6.24.1

The last section being the part i added manually. But when I select it at start up I get a kernel panic saying "Unable to mount root fs on unknown-block(8.5)

Do you know what I'm doing wrong?

duuri 02-11-2008 07:53 AM

Quote:

Originally Posted by Emerson (Post 3052496)
Before you start all this fun with new kernel we could try to tell the current kernel what this device is for:

sudo modprobe usbserial vendor=413c product=8137

This should create at least one /dev/ttyUSBx device, possibly two or three. Do ls /dev/ttyUSB* before and after modprobe command to see what happened.

hi this card ( dell true mobile 5520) has GPS build in..but this GPS is activated only on Latitude D630 ATG (under windows) but under linux there are 2 data interfaces ( under win is one interface disabled except latitude D630 ATG there are two).
is there way to check if one is for GPS and one for modem?:)

rgds,

CrownAmbassador 02-11-2008 07:56 AM

Quote:

Originally Posted by duuri (Post 3053310)
hi this card ( dell true mobile 5520) has GPS build in..but this GPS is activated only on Latitude D630 ATG (under windows) but under linux there are 2 data interfaces ( under win is one interface disabled except latitude D630 ATG there are two).
is there way to check if one is for GPS and one for modem?:)

rgds,

GPS? Wow! I never knew that! I work for a company that sells them but nobody ever said anything about GPS.

duuri 02-11-2008 08:12 AM

Quote:

Originally Posted by LonelyTraveler (Post 3053312)
GPS? Wow! I never knew that! I work for a company that sells them but nobody ever said anything about GPS.

yes, but it works only on D630 ATG...driver for Windows check by instalation
SystemID if something else then d630 ATG it blocks that GPS...

Emerson 02-11-2008 08:22 AM

Quote:

Originally Posted by LonelyTraveler (Post 3052656)

The last section being the part i added manually. But when I select it at start up I get a kernel panic saying "Unable to mount root fs on unknown-block(8.5)

Do you know what I'm doing wrong?

Your kernel has root filesystem support as module, all functions required to boot must be compiled into kernel, not as modules.

CrownAmbassador 02-11-2008 08:24 AM

Quote:

Originally Posted by duuri (Post 3053323)
yes, but it works only on D630 ATG...driver for Windows check by instalation
SystemID if something else then d630 ATG it blocks that GPS...

I do have the D630, but I don't know anything about it or how it works. Do you have one? I'm trying to figure out why I'm getting a kernel panic error. Driving my up the wall. I'm gonna start panicing!

duuri 02-11-2008 08:27 AM

Quote:

Originally Posted by LonelyTraveler (Post 3053330)
I do have the D630, but I don't know anything about it or how it works. Do you have one? I'm trying to figure out why I'm getting a kernel panic error. Driving my up the wall. I'm gonna start panicing!

D630 is not same like D630 ATG...i have D830 and TM 5520 is recognized under ubuntu 7.10 but i didn't try to use it like modem (i have PCMCIA Flarion card)...i'm just courtious about that gps, how to get it work..

CrownAmbassador 02-12-2008 01:53 PM

Emerson, I didn't even see the post about modprobe. The results are the same before and after running modprobe.

I can't find the root file system support in the kernel. Can it be calls something different?

Thanks.

Emerson 02-12-2008 02:18 PM

root filesystem - the partition and filesystem where / (root of system, not superuser) resides. Usually EXT3.

Edit: If you are using SATA or libata drivers make sure SCSI and SCSI disk support are compiled in, too.

comprookie2000 02-12-2008 04:54 PM

If you are using make menuconfig go to file systems;
here they are;
http://dwabbott.com/pictures/2008-02...x900_scrot.png
the * means support is compiled into the kernel so you don't need an initrd, a m means you do.

CrownAmbassador 02-13-2008 04:46 AM

Thanks comprookie,

I tried that now, but still the same problem. I've got a other thread related to this here. Some guys just posted something there, so I'm gonna check that out. Will be nice if you can have a look at the thread. I need all the help I can get.

Emerson 02-13-2008 08:38 AM

VFS: Unable to mount root fs on unknown-block(0,0)

This is different error, it means support for your HDD controller is missing.

CrownAmbassador 02-13-2008 01:39 PM

Hey Emerson. I've got the kernel working, but I have a few other issues that I'm talking about here like my Vodafone app not starting up. Feel free to PLEASE check it out. lol

CrownAmbassador 02-14-2008 08:08 AM

I've changed my kernel to a even newer one that had a great how to here and it even sorted out my sound. Kernel 2.6.24-7-generic

I've run the modprobe and ls command but there is only a USB1 and USB2 device before and after running it.

Also, the Vodafone app that I use for my USB modem from home still doesn't start up with the new kernel when the modem is plugged in.

And lsusb doesn't return anything.

Emerson 02-14-2008 09:56 AM

Quote:

I've run the modprobe and ls command but there is only a USB1 and USB2 device before and after running it.
Do you mean ttyUSB1 and ttyUSB2? Then maybe that's it (with new kernel usbserial should load at boot)? Did you run lsmod? Too bad I'm not standing behind you and looking over your shoulder. I do not have such an hardware myself and I have no further clues.
What do you mean by lsusb returns nothing? lsusb displays the USB devices in your system, if a device is included in usbid database then it adds also the name. You may want to update your usbid database.
Start your Vodafone app from terminal, any error messages?

CrownAmbassador 02-14-2008 10:24 AM

Quote:

Originally Posted by Emerson (Post 3056877)
Do you mean ttyUSB1 and ttyUSB2?

Yes. I meant ttyUSB. The code for the card is actually 413c:8140.

With the switch off:
Code:

crownambassador@Vista:~$ lsusb
Bus 007 Device 003: ID 0b97:7772 O2 Micro, Inc.
Bus 007 Device 002: ID 0b97:7761 O2 Micro, Inc.
Bus 007 Device 001: ID 0000:0000 
Bus 006 Device 002: ID 045e:007d Microsoft Corp. Notebook Optical Mouse
Bus 006 Device 001: ID 0000:0000 
Bus 005 Device 001: ID 0000:0000 
Bus 003 Device 002: ID 413c:8137 Dell Computer Corp.
Bus 003 Device 001: ID 0000:0000 
Bus 002 Device 001: ID 0000:0000 
Bus 004 Device 001: ID 0000:0000 
Bus 001 Device 001: ID 0000:0000

With the switch on:
Code:

crownambassador@Vista:~$ lsusb
Bus 007 Device 003: ID 0b97:7772 O2 Micro, Inc.
Bus 007 Device 002: ID 0b97:7761 O2 Micro, Inc.
Bus 007 Device 001: ID 0000:0000 
Bus 006 Device 002: ID 045e:007d Microsoft Corp. Notebook Optical Mouse
Bus 006 Device 001: ID 0000:0000 
Bus 005 Device 001: ID 0000:0000 
Bus 003 Device 002: ID 413c:8137 Dell Computer Corp.
Bus 003 Device 001: ID 0000:0000 
Bus 002 Device 004: ID 413c:8140 Dell Computer Corp.
Bus 002 Device 001: ID 0000:0000 
Bus 004 Device 001: ID 0000:0000 
Bus 001 Device 001: ID 0000:0000

Code:

crownambassador@Vista:~$ ls /dev/ttyUSB*
/dev/ttyUSB0  /dev/ttyUSB1
crownambassador@Vista:~$ sudo modprobe usbserial vendor=0x413c product=0x8140
crownambassador@Vista:~$ ls /dev/ttyUSB*
/dev/ttyUSB0  /dev/ttyUSB1
crownambassador@Vista:~$

And it's the same with the switch off.

Quote:

Then maybe that's it (with new kernel usbserial should load at boot)?
I don't quite know what you are asking here?

lsmod:

Quote:

Did you run lsmod?
Code:

crownambassador@Vista:~$ lsmod
Module                  Size  Used by
ipv6                  267780  10
i915                  25216  2
drm                    81300  3 i915
af_packet              23812  2
rfcomm                41744  2
l2cap                  25728  11 rfcomm
ppdev                  10372  0
acpi_cpufreq          10796  2
cpufreq_conservative    8712  0
cpufreq_powersave      2688  0
cpufreq_userspace      5284  0
cpufreq_stats          7104  0
cpufreq_ondemand        9740  1
freq_table              5536  3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
container              5632  0
sbs                    15112  0
sbshc                  7680  1 sbs
bay                    6912  0
dock                  11280  1 bay
sbp2                  24072  0
parport_pc            36260  0
lp                    12324  0
parport                37832  3 ppdev,parport_pc,lp
arc4                    2944  2
ecb                    4480  2
blkcipher              8324  1 ecb
pcmcia                40876  0
joydev                13120  0
hci_usb                16412  2
option                11392  0
usbserial              35816  1 option
bluetooth              60260  7 rfcomm,l2cap,hci_usb
snd_hda_intel        342680  1
iwl3945                89844  0
iwlwifi_mac80211      218212  1 iwl3945
snd_pcm_oss            42144  0
snd_mixer_oss          17920  1 snd_pcm_oss
cfg80211              15112  1 iwlwifi_mac80211
snd_pcm                78596  2 snd_hda_intel,snd_pcm_oss
snd_page_alloc        11400  2 snd_hda_intel,snd_pcm
snd_hwdep              10500  1 snd_hda_intel
snd_seq_dummy          4868  0
snd_seq_oss            35584  0
snd_seq_midi            9376  0
snd_rawmidi            25760  1 snd_seq_midi
snd_seq_midi_event      8320  2 snd_seq_oss,snd_seq_midi
video                  19728  0
snd_seq                54224  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
output                  4736  1 video
serio_raw              7940  0
iTCO_wdt              13092  0
snd_timer              24836  2 snd_pcm,snd_seq
snd_seq_device          9612  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
yenta_socket          27276  1
rsrc_nonstatic        13696  1 yenta_socket
pcmcia_core            40596  3 pcmcia,yenta_socket,rsrc_nonstatic
intel_agp              25492  1
ac                      6916  0
button                  9232  0
battery                14212  0
iTCO_vendor_support    4868  1 iTCO_wdt
agpgart                34760  3 drm,intel_agp
snd                    56996  13 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
shpchp                34452  0
pci_hotplug            30880  1 shpchp
dcdbas                  9504  0
evdev                  13056  8
soundcore              8800  1 snd
pcspkr                  4224  0
psmouse                40336  0
ext3                  136712  1
jbd                    48404  1 ext3
mbcache                9600  1 ext3
sg                    36880  0
sd_mod                30592  3
ide_cd                32416  0
cdrom                  37408  1 ide_cd
ata_generic            8324  0
pata_acpi              8320  0
usbhid                31744  0
hid                    38528  1 usbhid
ata_piix              19588  2
libata                159344  3 ata_generic,pata_acpi,ata_piix
scsi_mod              151436  4 sbp2,sg,sd_mod,libata
piix                    8836  0 [permanent]
ohci1394              33584  0
ieee1394              93752  2 sbp2,ohci1394
generic                5380  0 [permanent]
ide_core              113996  3 ide_cd,piix,generic
tg3                  116228  0
uhci_hcd              27024  0
ehci_hcd              37004  0
usbcore              145516  7 hci_usb,option,usbserial,usbhid,uhci_hcd,ehci_hcd
thermal                16796  0
processor              36872  4 acpi_cpufreq,thermal
fan                    5636  0
fuse                  50580  1
fbcon                  42912  0
tileblit                3456  1 fbcon
font                    9472  1 fbcon
bitblit                6784  1 fbcon
softcursor              3072  1 bitblit

Quote:

What do you mean by lsusb returns nothing? lsusb displays the USB devices in your system, if a device is included in usbid database then it adds also the name. You may want to update your usbid database.
I had to add a Hardy repository to add the kernel and then remove it afterwards. Then I had to add the repository again to update udev in ordre to get lsusb to work.

Quote:

Start your Vodafone app from terminal, any error messages?
Code:

crownambassador@Vista:~$ vodafone-mobile-connect-card-driver-for-linux

Failed to load application:

Nothing after the colon though.


All times are GMT -5. The time now is 11:39 PM.